1. Produk Langkungview
This manual provides essential information for the installation, operation, and maintenance of replacement computer and touch display boards for LG drum washing machines. These boards are critical components responsible for controlling the washing machine's functions and user interface.
Note: The images above illustrate typical designs for the touch display and main computer boards. Actual appearance may vary slightly depending on the specific model.
2. Setup jeung Instalasi
WARNING: Installation of electronic components in a washing machine involves electrical hazards and requires technical expertise. It is strongly recommended that installation be performed by a qualified technician. Always disconnect the washing machine from the power supply before attempting any installation or repair.
- Kasalametan munggaran: Ensure the washing machine is unplugged from the wall outlet and the water supply is turned off.
- Access the Boards: Depending on your washing machine model, you may need to remove the top panel, control panel, or rear access panel to reach the computer and display boards. Refer to your specific washing machine's service manual for detailed access instructions.
- Sambungan Dokumén: Before disconnecting any wires, take clear photos or make detailed diagrams of all electrical connections to the old board(s). Pay close attention to wire colors and connector positions.
- Remove Old Board(s): Carefully disconnect all wiring harnesses and mounting screws securing the old board(s). Handle electronic components by their edges to avoid static discharge.
- Install New Board(s): Position the new board(s) in the same location as the old one(s). Secure them with the original screws.
- Sambungkeun deui Wiring: Using your documented connections, carefully reattach all wiring harnesses to the new board(s). Ensure all connections are firm and correctly seated.
- Pasang deui: Pasang deui panel atanapi panutup anu dicabut.
- Fungsi Uji: Plug the washing machine back into the power supply and turn on the water. Perform a test cycle to ensure all functions operate correctly.
3. Parentah Operasi
These computer and touch display boards are replacement parts designed to restore the original functionality of your LG drum washing machine. Once correctly installed, the washing machine should operate according to its original manufacturer's instructions. There are no specific operating instructions for the boards themselves beyond their role in enabling the washing machine's normal functions.
Refer to your LG washing machine's original user manual for details on selecting wash cycles, adjusting settings, and general operation.
4. Pangropéa
The computer and touch display boards are sealed electronic components and generally do not require routine maintenance. However, to ensure their longevity and proper function:
- Tetep garing: Prevent water or excessive moisture from coming into contact with the boards. Ensure all seals and gaskets within the washing machine are intact and functioning correctly.
- Kabersihan: If the exterior of the touch display board becomes dirty, gently wipe it with a soft, damp lawon. Hindarkeun pembersih abrasive atanapi Uap kaleuleuwihan.
- Ventilasi: Ensure the washing machine's internal components have adequate ventilation as designed by the manufacturer to prevent overheating of electronic parts.
5. Cara ngungkulan
If your washing machine exhibits issues after replacing the computer or display board, consider the following troubleshooting steps:
- Teu aya Daya / Teu aya tampilan:
- Check if the washing machine is properly plugged into a working outlet.
- Verify that all wiring harnesses to the new board(s) are securely connected.
- Ensure the main power switch (if applicable) is on.
- Incorrect Function/Error Codes:
- Double-check all wiring connections against your documentation. A single misplaced wire can cause malfunctions.
- Consult your LG washing machine's original user manual or service manual for specific error code interpretations.
- Ensure the replacement board is the correct model number for your washing machine.
- Touchscreen Unresponsive (for display board):
- Ensure the display board's ribbon cables are correctly and securely seated.
- Gently clean the screen surface.
If issues persist after these steps, professional diagnosis and repair are recommended.
6. Spésifikasi
| Fitur | Rincian |
|---|---|
| Jenis produk | Washing Machine Parts (Computer Board, Touch Display Board) |
| Brand cocog | LG |
| Model Numbers (Main Board) | EBR805789, EBR80578947 |
| Model Numbers (Display Board) | EBR801537, EBR80153724 |
| Asalna | Daratan Cina |
| Kimia anu prihatin tinggi | Euweuh |
| Kira-kira. Ukuran Paket (L x W x H) | 35 cm x 25 cm x 10 cm |
| Kira-kira. Beurat pakét | 1.5 kg |
7. Tips pamaké
- Pariksa Nomer Modél: Always double-check the exact model number of your washing machine and the part number of the board you are replacing to ensure compatibility. Even slight variations can lead to incompatibility.
- Pamasangan profésional: Given the complexity and electrical nature of these components, professional installation is highly recommended to avoid damage to the part or the washing machine, and to ensure safety.
8. Seller Support and Guarantees
The seller provides the following guarantees for your purchase:
- Pulangan Gratis: bebas mulih sadia dina 90 poé pameseran.
- Pangiriman gancang & ngabalikeun duit pikeun Masalah:
- Kode Kupon $ 1.00 tiasa disayogikeun upami pangiriman ditunda.
- Ngabalikeun duit sadia lamun pakét leungit.
- Ngabalikeun duit sadia lamun barang ruksak kana datangna.
- Ngabalikeun duit sadia lamun euweuh pangiriman lumangsung dina 30 poé.
- Kaamanan & Privasi: The seller ensures safe payments and secure handling of personal details, not sharing them with third parties without consent.
For any support inquiries, please contact the seller directly through the platform where the purchase was made.
