Toyota Fuel Tank Cap Cable LHD 77035-0k460 / RHD 77035-0k500

Toyota Hilux Fuel Tank Cap Cable Instruction Manual

Model: 2016, 2017, 2018, 2019, 2020, 2021

Bubuka

This manual provides instructions for the installation and maintenance of the fuel tank cap cable for Toyota Hilux models manufactured between 2016 and 2021. This cable is designed to secure the fuel cap to the vehicle, preventing loss or misplacement during refueling.

Please ensure you have the correct part number for your vehicle's configuration (Left-Hand Drive or Right-Hand Drive) before proceeding with installation.

spésifikasi

Fitur Rincian
kaayaan Énggal pisan
Ukuran barang Standar
OE Number (LHD) 77035-0k460
OE Number (RHD) 77035-0k500
Kandaraan lumaku Toyota Hilux (2016-2021)
Asalna Daratan Cina
Pinuh view of the fuel tank cap cable
Gambar 1: Pinuh view of the fuel tank cap cable, showing its length and overall design.
Close-up of fuel tank cap cable ends
Gambar 2: Detil view of the cable's attachment points and fittings.

Parentah instalasi

Before beginning, ensure the vehicle is parked on a level surface and the engine is off. It is recommended to consult a professional mechanic if you are unsure about any steps.

Diagram showing fuel tank cap cable installation on Toyota Hilux
Gambar 3: Leuwihview of the fuel tank cap cable and its typical installation location on a Toyota Hilux. The diagram illustrates the routing and connection points for both LHD and RHD models.
  1. Tangtukeun Bagian Anu Leres: Verify that the OE number on your new cable matches the required specification for your Toyota Hilux (LHD 77035-0k460 or RHD 77035-0k500).
  2. Access the Fuel Filler Area: Open the fuel filler door. Depending on your vehicle's specific trim, you may need to remove a few plastic clips or screws to gain better access to the existing cable or its mounting points.
  3. Remove the Old Cable (if applicable): Carefully detach the old fuel tank cap cable from both the fuel cap and the vehicle body. Note how the old cable was routed and secured.
  4. Attach the New Cable to the Fuel Cap: Connect one end of the new cable to the fuel cap. Ensure it is securely fastened according to the cap's design.
  5. Jalur kabel: Route the cable along the same path as the original, ensuring it does not interfere with the fuel filler door mechanism or other components. Refer to Figure 3 for a general routing guide.
  6. Attach the New Cable to the Vehicle Body: Secure the other end of the cable to the designated mounting point within the fuel filler area. This typically involves a clip or a small anchor point.
  7. Fungsi Uji: Gently pull on the fuel cap to ensure the cable is securely attached and has enough slack to allow the cap to be removed and replaced without strain, but not so much that it can get caught. Close and open the fuel filler door to confirm proper operation.
  8. Pasang deui: Reinstall any removed trim pieces, clips, or screws.

Operasi

The fuel tank cap cable operates passively. Its primary function is to keep the fuel cap tethered to the vehicle when removed for refueling. Simply remove the fuel cap as usual, and the cable will prevent it from being dropped or left behind. When finished, replace the fuel cap and close the fuel filler door.

Pangropéa

  • Inspeksi rutin: Periodically inspect the fuel tank cap cable for any signs of wear, fraying, cracks, or damage, especially at the attachment points.
  • Kabersihan: Keep the cable and its attachment points free from dirt, debris, and fuel spills.
  • Routing ditangtoskeun: Ensure the cable remains properly routed and is not pinched or rubbing against sharp edges, which could lead to premature wear.
  • ngagantian: If any damage is observed, replace the cable promptly to maintain its intended function.

Pamérésan masalah

Masalah Mungkin Cukang lantaranana Solusi
Fuel cap cable is broken or detached. Wear and tear, improper installation, accidental damage. Replace the cable with a new one, ensuring secure attachment at both ends.
Fuel cap cable interferes with fuel filler door. Incorrect routing of the cable. Re-route the cable, ensuring it has sufficient slack and clearance from moving parts.
Fuel cap feels loose or insecure after cable installation. Cable not properly attached to the cap or mounting point. Re-check all attachment points for secure fastening. Ensure the cap itself is functioning correctly.

Tip pamaké

  • Pariksa kasaluyuan: Always double-check the OE number and vehicle compatibility (LHD/RHD) before purchasing and installing. If unsure, provide your vehicle's identification number (VIN) to a parts specialist for verification.
  • Penanganan Lembut: Avoid excessive pulling or tugging on the fuel cap cable, as this can cause premature wear or breakage.

Ngarojong

For any questions regarding this product, installation, or if you encounter issues not covered in this manual, please contact the seller or a qualified automotive technician for assistance.

Dokumén Patali - Fuel Tank Cap Cable LHD 77035-0k460 / RHD 77035-0k500

Praview Toyota Camry 2011-2023 Repair and Operation Manual
Comprehensive repair and operation manual for Toyota Camry models from 2011 onwards (V50 chassis), covering maintenance, troubleshooting, and technical specifications for various vehicle systems.
Praview Toyota Sienna 3G Fuse and Relay Guide (2011-2021)
Detailed guide to fuses and relays for the 3rd generation Toyota Sienna (2011-2021). Includes locations, diagrams, and functions for passenger compartment and engine compartment fuse boxes.
Praview Manual Pemasangan Gerbang Belakang Listrik Toyota Land Cruiser (2016-2020 RHD)
Pituduh pamasangan lengkep pikeun kit konversi tailgate listrik (Modél 8-ETTY-5089-00-00) pikeun kandaraan Toyota Land Cruiser (2016-2020 RHD). Ngawengku pitunjuk léngkah-léngkah, daptar suku cadang, sareng pituduh panggunaan.
Praview Toyota Safety Recall 20TA02: Pitunjuk Téknis Panggantian Pompa Bahan Bakar
Comprehensive technical instructions for Toyota dealerships and technicians on performing Safety Recall 20TA02, which addresses potential fuel pump failure leading to vehicle stalling. Includes affected models, preparation, disassembly, reassembly, and installation procedures.
Praview Toyota Safety Recall 20TA02: Pitunjuk Téknis Panggantian Pompa Bahan Bakar
Detailed technical instructions for Toyota dealerships regarding Safety Recall 20TA02, covering fuel pump replacement for various Toyota models to address potential stalling issues. Includes parts, tools, and procedures.
Praview Daptar Harga Toyota Désémber 2021: Ngajalajah Modél, Pilihan & Hargana
View daptar harga resmi Toyota efektif Désémber 2021. Panggihan harga pikeun mobil Toyota anyar, kalebet Aygo X, Yaris, Corolla, RAV4, sareng seueur deui, sareng pilihan anu sayogi sareng layanan palanggan.