1. Bubuka
The ATOMSTACK R8 Pro Laser Rotary Roller Jaw Chuck Set is a versatile accessory designed to expand the capabilities of your laser engraver. It combines the functionalities of both a rotary chuck (R8) and a rotary roller (R6), allowing for precise engraving on a wide range of objects, including standard cylindrical items like wine bottles and pipes, as well as irregularly shaped objects such as cups, spheres, and rings.
Equipped with an intelligent adaptive system, the R8 Pro seamlessly integrates with AtomStack Studio and is fully compatible with LightBurn, offering intelligent parameter adaptation without manual adjustments. Its convenient USB plug-and-play design ensures easy setup and operation.
2. Émbaran Kasalametan
Please read and understand all safety instructions before operating the ATOMSTACK R8 Pro. Failure to follow these instructions may result in injury or damage to the device.
- Always wear appropriate personal protective equipment (PPE), such as safety glasses, when operating laser engraving equipment.
- Ensure the laser engraver and the R8 Pro are placed on a stable, level surface.
- Do not leave the laser engraver unattended during operation.
- Jauhkeun barudak jeung piaraan ti wewengkon operasi.
- Ensure proper ventilation in the work area to dissipate fumes and smoke generated during engraving.
- Pegatkeun sambungan kakuatan saméméh ngalakukeun sagala pangropéa atawa pangaluyuan.
- Do not attempt to modify the R8 Pro or its components.
3. Daptar bungkusan
Verify that all components are present upon unpacking. If any items are missing or damaged, please contact customer support.
R8 Rotary Chuck Components:
- Chuck main unit (1)
- Kabel sambungan motor (1)
- Kabel sambungan colokan bodas (1)
- Kabel sambungan colokan hideung (1)
- L-shaped jaws (3)
- Ladder jaws (3)
- Hexagonal jaws (3)
- Threaded cylindrical pins (3)
- Bracket rojongan Tailstock (1)
- Mini level meter (1)
- Soft measuring tape (1)
- Caliper (1)
- Kit sekrup (1)
- Kunci hex (1)
- Manual instruksi (1)
R6 Rotary Roller Components:
- Unit utama rol (1)
- Kabel sambungan motor (1)
- Kabel sambungan colokan bodas (1)
- Kabel sambungan colokan hideung (1)
- Bracket rojongan Tailstock (1)
- Kit sekrup (1)
- Kunci hex (1)
- Manual instruksi (1)
4. Spésifikasi
| Fitur | R8 Rotary Chuck | R6 Rotary Roller |
|---|---|---|
| Total Beurat | 1.5 kg | 1.4 kg |
| Sudut Rotasi | 25° | N/A |
| Diaméter Ukiran (Objék Silinder) | 0-80 mm | 0-120 mm |
| Engraving Diameter (Circular Objects) | 10-70 mm | N/A |
| Engraving Diameter (Spherical Objects) | 25-80 mm | N/A |
| Kapasitas beban | 1.5 kg | 1.5 kg |
| Bahan | High-quality aluminum alloy and high hardness brass | |
| Max Object Length (with extended support) | Up to 1 meter (when weight is within bearable range) | |
5. Parentah Setup
The ATOMSTACK R8 Pro is designed for easy plug-and-play setup. Follow these steps to connect it to your laser engraver.
5.1 Assembling the Rotary Unit
Refer to the packing list and the included instruction manual for detailed assembly steps for both the R8 Rotary Chuck and R6 Rotary Roller configurations. Use the provided hex wrench and screw kit for assembly.
The R8 Rotary Chuck includes L-shaped, ladder, and hexagonal jaws, along with threaded cylindrical pins, to securely hold various object shapes. The tailstock support bracket is used to provide additional stability for longer items.
5.2 Nyambungkeun ka Laser Engraver Anjeun
The R8 Pro supports dual wiring modes to ensure compatibility with a wide range of ATOMSTACK machines and some other brands.
| Sambungan Kabel USB | Sambungan Kabel Motor |
|---|---|
| P1 (MINI) | A6 PRO, A12 PRO, A24 PRO, A48 PRO |
| K2 (KRAFT) | A24 PRO 1064NM, A12 ULTRA, A24 ULTRA, A48 ULTRA |
| L1 | A5 PRO V2, A10 PRO V2, A20 PRO V2, A5 PRO V2 BLACK |
| K60 (HURRIKAN) | A10 PRO V2 BLACK, A5, A5 M30, A5 M40, A5 M50, A5 M50 PRO |
| A5 PRO, A5 PRO+, A10, A10 PRO, A20, A20 PRO, A30 PRO, A40 PRO | |
| A40 MAX, A70 PRO, P7 M30, P7 M40, P9 M40, P9 M50 | |
| ... and All AtomStack machines |
For USB connection, simply plug the R8 Pro into your computer. It will automatically enter roller processing mode when connected to AtomStack Studio or LightBurn.
6. Parentah Operasi
The R8 Pro offers flexible operation for various engraving tasks.
6.1 Pamaduan Software
The R8 Pro features an intelligent adaptive system that integrates seamlessly with AtomStack Studio and is fully compatible with LightBurn. Once connected via USB, the software should automatically detect the rotary attachment and enter the appropriate processing mode. You can then adjust settings within the software for your specific engraving project.
6.2 Adapting to Different Materials and Shapes
The R8 Pro is designed to handle a wide variety of objects:
- Objék Silinder: Use the R6 Rotary Roller for standard cylindrical items like bottles, pipes, and tumblers. The roller provides stable rotation for consistent engraving.
- Irregular and Special-Shaped Objects: Switch to the R8 Rotary Chuck for items such as cups, spheres, and rings. The chuck comes with L-shaped, ladder, and hexagonal jaws to securely grip objects with complex contours.
The system supports multiple shapes and sizes, allowing for flexible adjustment according to the object's diameter to achieve the best carving effect and stable support.
6.3 Adjusting Engraving Angles
The R8 Pro features 30° elevation and 180° horizontal rotation, providing multiple angles to suit different materials and engraving requirements.
6.4 Engraving Extra-Long Items
With its exclusive extended support design, the R8 Pro can support the processing of extra-long items, up to 1 meter in length, provided the weight of the item is within the bearable range (1.5 kg).
7. Pangropéa
Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK R8 Pro.
- beberesih: After each use, gently clean any dust or debris from the rotary unit, especially around moving parts and jaws. Use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Lubrication: Periodically check the moving parts for smooth operation. If necessary, apply a small amount of light machine oil to the gears and bearings to ensure smooth rotation.
- Pamariksaan: Regularly inspect all cables for signs of wear or damage. Ensure all screws and fasteners are tight.
- Panyimpenan: When not in use, store the R8 Pro in a clean, dry environment, away from direct sunlight and extreme temperatures.
8. Cara ngungkulan
This section addresses common issues you might encounter with your ATOMSTACK R8 Pro.
- Issue: Rotary unit not detected by software.
- Solusi:
- Ensure the USB cable is securely connected to both the R8 Pro and your computer/laser engraver.
- Verify that the correct drivers are installed for your laser engraver and the R8 Pro.
- Restart the engraving software (AtomStack Studio/LightBurn) and your computer.
- Coba port USB atawa kabel béda.
- Check the compatibility table in Section 5.2 to ensure your laser engraver model supports the connection type.
- Issue: Object slipping during engraving.
- Solusi:
- Ensure the jaws or rollers are securely tightened around the object.
- For irregular objects, select the most appropriate jaw type (L-shaped, ladder, hexagonal) for a firm grip.
- Verify that the object's weight does not exceed the 1.5 kg load capacity.
- Clean the gripping surfaces of the jaws/rollers and the object to remove any oils or debris that might reduce friction.
- Issue: Inconsistent engraving results on cylindrical objects.
- Solusi:
- Ensure the object is perfectly centered and level on the rotary unit. Use the mini level meter provided.
- Check that the tailstock support bracket is properly adjusted and providing stable support, especially for longer items.
- Verify that the object is not slipping or wobbling during rotation.
- Calibrate the rotary axis in your engraving software if available.
9. Tips pamaké
Here are some tips to enhance your experience with the ATOMSTACK R8 Pro:
- Understand the Components: The R8 Pro is a versatile set that includes both a chuck (for irregular shapes) and a roller (for standard cylinders). Familiarize yourself with which components are for which task to maximize efficiency.
- Pre-measure Objects: Use the provided caliper and measuring tape to accurately measure your objects before setting up. This helps in precise software configuration and optimal engraving results.
- Ukiran Uji: Before engraving on your final piece, perform a test engraving on a similar scrap material to fine-tune settings and ensure proper alignment.
- Secure Long Items: When engraving extra-long items, always utilize the tailstock support bracket to prevent sagging and ensure consistent engraving quality along the entire length.
10. Garansi jeung Rojongan
ATOMSTACK products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official ATOMSTACK websitus atanapi hubungi dealer resmi anjeun.
Punten tahan bukti pameseran anjeun pikeun klaim garansi.
