1. Produk Langkungview
The Skydance V1-K LED Dimmer is a 1-channel, 20A constant voltage controller designed for single-color LED strips. It features a rotary knob with a digital numeric display for visible dimming levels and can be controlled wirelessly via 2.4G remote controls. The dimmer offers smooth 0-100% dimming without flicker and includes multiple protection features such as over-heat, over-load, and short circuit protection.
2. Spésifikasi
| Parameter | Nilai |
|---|---|
| Masukan Voltage | 12-48VDC |
| Input Ayeuna | 20A |
| Kaluaran Voltage | 12-48VDC |
| Kaluaran Ayeuna | 1CH, 20A Max. |
| Max. Beban Daya | 12V: 240W, 24V: 480W, 36V: 720W, 48V: 960W |
| Tipe Kaluaran | Konstanta Voltage |
| Sinyal Input | kenop Rotary + RF 2.4GHz |
| Kontrol Jarak | 15m (barrier-free space) |
| Dimming Gray Scale | 100 tingkat |
| Rentang Dimming | 0-100% |
| Kurva Dimming | Logarithmic or Linear selectable |
| Frékuénsi PWM | 160Hz, 800Hz, 2KHz, 8KHz selectable |
| Suhu Operasi | Ta: -30°C ~ +55°C |
| Suhu kasus | Tc: +85°C |
| Ukuran (L × W × H) | 112 × 60 × 45 mm |
| Beurat kotor | 0.165 kg |
| Sertifikasi | CE, RoHS |
3. Setup jeung Instalasi
3.1 Diagram Wiring
Connect the V1-K LED Dimmer according to the diagram below. Ensure correct polarity for DC input and LED strip output.
- IN (DC 12-48V): Connect to your constant voltage power supply. Ensure the voltage matches your LED strip requirements.
- OUT (V+, V-): Connect to your single color LED strip.
3.2 Pancegahan Pancegahan
- Do not stack products; maintain a distance of at least 20cm to ensure proper heat dissipation and product lifespan.
- Avoid installing the receiver close to switching power supplies (maintain ≥ 20cm interval) to prevent radiation interference.
- Install the product at a height of ≥ 1m from the floor to optimize remote control distance and signal reception.
- Keep products away from or uncovered by metal objects (maintain ≥ 20cm interval) to avoid signal attenuation.
- Avoid installation at wall corners or beam corners (maintain ≥ 20cm interval) to prevent signal interference.
3.3 PWM Frequency Setting
The V1-K dimmer allows selection of PWM frequency using the DIP switches. Refer to the diagram below for settings:
| DIP Pindah Setélan | Frékuénsi PWM |
|---|---|
| 1 OFF, 2 OFF | 160Hz |
| 1 ON, 2 OFF | 800Hz |
| 1 OFF, 2 ON | 2KHz |
| 1 ON, 2 ON | 8KHz |
Higher PWM frequencies generally result in lower output current and higher power noise, but are better for camera applications (no visible flickers in video recordings).
4. Parentah Operasi
4.1 Basic Operation (V1-K Dimmer)
- Kenop Rotary: Turn the knob clockwise to increase brightness, counter-clockwise to decrease. Push the knob to turn the LED strip ON/OFF.
- Digital tampilan: Shows the current dimming level in percentage.
4.2 Matching Remote Control (Two Ways)
The V1-K dimmer can be paired with various Skydance 2.4G wireless remote controls (R11, R1, R6-1, RT1). Choose one of the following methods:
- Match Key Method:
- Short press the 'Match' key on the V1-K dimmer.
- Immediately press the ON/OFF key (for single zone remotes) or a specific zone key (for multiple zone remotes) on your remote control.
- The LED indicator on the dimmer will flash a few times, indicating successful pairing.
- Power Restart Method:
- Switch off the power to the V1-K dimmer.
- Switch on the power, then immediately press the ON/OFF key (for single zone remotes) or a specific zone key (for multiple zone remotes) 3 times on your remote control.
- The LED indicator on the dimmer will blink 3 times, indicating successful pairing.
4.3 Deleting Matched Remote Controls
To unpair remote controls from the V1-K dimmer:
- Match Key Method:
- Press and hold the 'Match' key on the V1-K dimmer for 5 seconds.
- The LED indicator will fast flash a few times, indicating all matched remotes have been deleted.
- Power Restart Method:
- Switch off the power to the V1-K dimmer.
- Switch on the power, then immediately press the ON/OFF key (for single zone remotes) or a specific zone key (for multiple zone remotes) 5 times on your remote control.
- The LED indicator on the dimmer will blink 5 times, indicating all matched remotes have been deleted.
4.4 Dimming Curve Selection
The V1-K dimmer supports both linear and logarithmic dimming curves. This setting is typically configured via internal dip switches or a similar mechanism, as indicated in the technical diagram. Logarithmic dimming provides a more natural perception of brightness changes to the human eye.
4.5 Light On/Off Fade Time
- To set the light on/off fade time to 3 seconds: Long press the 'Match' key for 2 seconds, then short press the 'Match' key 3 times. The indicator light will blink 3 times.
- To restore the factory default fade time (0.5 seconds): Long press the 'Match' key for 10 seconds.
5. Pangropéa
The Skydance V1-K LED Dimmer is designed for long-term, reliable operation with minimal maintenance. To ensure optimal performance:
- Jaga alat tetep beresih sareng leupas tina lebu. Anggo kaén anu lemes sareng garing pikeun beberesih.
- Avoid exposing the device to excessive moisture or extreme temperatures outside its specified operating range.
- Ensure proper ventilation around the dimmer to prevent overheating.
6. Cara ngungkulan
Refer to the table below for common malfunctions and their solutions:
| Rusak | Cukang lantaranana | Pamérésan masalah |
|---|---|---|
| Taya cahaya | No power, loose connection or insecure. | Check the power supply. Check all connections. |
| Uneven intensity | Output cable is too long, wire diameter is too small. | Reduce cable length or loop supply. Use wider gauge wire. |
| Voltage drop between front and rear of LED strip | Overload saluareun kamampuan catu daya. | Replace with a higher power supply. |
| Overload | Overload saluareun kamampuan controller. | Replace with a higher power supply or reduce load. |
7. Garansi jeung Rojongan
7.1 Garansi
This product comes with a 5-year warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
7.2 Rojongan Téknis
For technical assistance or warranty claims, please contact your retailer or the manufacturer's customer support. Provide your product model number and a detailed description of the issue.
8. Tips pamaké
- Pamariksaan batré jauh: If your remote control is unresponsive, first check and replace its batteries. (Note: Remotes do not include batteries upon purchase).
- Gangguan sinyal: If you experience inconsistent remote control response, ensure the dimmer is not too close to large metal objects or other wireless devices that might cause interference. Adjusting the installation height can also improve signal reception.
- Load Calculation: Always ensure the total wattage of your LED strips does not exceed the maximum load power of the V1-K dimmer at your operating voltage to prevent overload and ensure longevity.
- PWM Frequency for Photography: If using the LED strips for photography or video recording, select a higher PWM frequency (e.g., 8KHz) to minimize visible flicker in recordings.
