Antec FLUX SE MESH BTF Mid Tower Case

Bubuka

Thank you for choosing the Antec FLUX SE MESH BTF Mid Tower Case. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new PC case. Please read this manual carefully before beginning your build to ensure proper installation and optimal performance.

Setup sareng Instalasi

Before starting, ensure you have all necessary components and tools. Always handle components with care and consider using an anti-static wrist strap.

1. Nyiapkeun Kasus

1. Leupaskeun Panel Sisi: Carefully remove the tempered glass side panel and the steel side panel by unscrewing the thumbscrews at the rear of the case.
2. Access Front Panel: The front mesh panel can be detached for easier access to front fan mounts and dust filter cleaning.
3. Identipikasi komponén: Familiarize yourself with the internal layout, including motherboard tray, drive bays, and fan mounts.

2. Pamasangan motherboard

1. Install the CPU, CPU cooler (if air cooler), and RAM onto your motherboard before placing it in the case.
2. Align the motherboard with the standoffs in the case. The case supports ATX, Micro-ATX, and Mini-ITX motherboards.
3. Ngamankeun motherboard jeung screws disadiakeun.

3. Pamasangan Power Supply Unit (PSU).

1. Mount your ATX power supply into the PSU shroud area at the bottom rear of the case.
2. Amankeun PSU nganggo sekrup ti tukangeun casing.

4. Panyimpenan Girang Instalasi

• 3.5" HDDs: Install 3.5" hard drives into the dedicated drive cage located under the PSU shroud.
• 2.5" SSDs: Mount 2.5" SSDs to the dedicated brackets behind the motherboard tray or on top of the PSU shroud.

5. Pamasangan Kartu Grafika (GPU).

1. Cabut panutup slot ékspansi anu diperyogikeun di bagian tukang wadahna.
2. Insert your graphics card into the PCIe slot on the motherboard and secure it with screws.

6. Pamasangan kipas sareng radiator

The case offers extensive cooling options:

• Hareup: Supports up to 3 x 120mm or 2 x 140mm fans, or radiators up to 360mm.
• luhur: Supports up to 2 x 120mm or 2 x 140mm fans, or radiators up to 280mm.
• Tukangeun: Supports 1 x 120mm fan or 120mm radiator.
• Kain PSU: Ngarojong 2 kipas x 120mm.

7. Manajemén kabel

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables for improved airflow and aesthetics.

8. Connecting Front I/O

Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

Ngoperasikeun Casing PC Anjeun

Once all components are installed and cables are connected, replace the side panels. Power on your system using the power button on the front I/O panel. The mesh design ensures optimal airflow for cooling your components.

Port I/O hareup:

• Tombol Daya: Pikeun ngahurungkeun / mareuman sistem.
• Tombol Reset: Pikeun ngabalikan deui sistem.
• Port USB 3.0: Pikeun mindahkeun data-speed tinggi.
• Palabuhan USB 2.0: Pikeun alat USB standar.
• Jacks Audio HD: Pikeun headphone sareng mikropon.

Pangropéa

Pangropéa rutin ngabantosan mastikeun kinerja optimal sareng umur panjang komponén PC anjeun.

• Saringan debu: The case features removable dust filters on the front, top, and bottom (PSU intake). Regularly remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
• Beberesih interior: Periodically use compressed air to clear dust from internal components and fans. Ensure the system is powered off and unplugged before cleaning.
• Bersihan Luar: Ngusap permukaan luar kalayan lemes, damp lawon. Hindarkeun bahan kimia kasar anu tiasa ngarusak finish.

Pamérésan masalah

Upami anjeun mendakan masalah, pertimbangkeun léngkah-léngkah ngungkulan umum ieu:

• Henteu aya kakuatan: Ensure the PSU is switched on, all power cables (24-pin, 8-pin CPU, GPU PCIe) are securely connected, and the front panel power switch cable is correctly attached to the motherboard.
• Penggemar Teu Diputer: Check fan connections to the motherboard or fan controller. Ensure sufficient power is supplied.
• Front I/O Not Working: Verify that all front panel cables (USB, Audio) are correctly connected to the motherboard headers.
• Overheating: Ensure proper fan configuration (intake/exhaust), clean dust filters, and check CPU cooler/GPU heatsink mounting.

spésifikasi

The Antec FLUX SE MESH BTF Mid Tower Case offers robust features for PC builders:

Garansi sareng Rojongan

For warranty information and technical support, please refer to the official Antec websitus atanapi ngahubungan pangecér Anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi.

Tip pamaké

• Manajemén Kabel: Take your time with cable management. A tidy interior not only looks better but also improves airflow and makes future upgrades easier.
• Orientasi Kipas: Ensure your fans are oriented correctly for optimal airflow. Typically, front and bottom fans should be intake, while rear and top fans should be exhaust.
• Pembersih Saringan Debu: Make cleaning dust filters a routine task (e.g., once a month) to maintain good airflow and prevent dust buildup inside your PC.
• Kompatibilitas komponén: Always double-check the dimensions of your CPU cooler, GPU, and PSU against the case's maximum clearance specifications before purchasing.