Buku Panduan Kontrol Jarak Jauh RF Universal

Bubuka

This manual provides detailed instructions for the Universal 433MHz/315MHz Copy RF Remote Control, Model RA-RC07. This device is designed to duplicate signals from most fixed code remote controls, offering a convenient solution for various applications including home security systems, electric gates, garage doors, and vehicle access.

Product Features and Applications

The RA-RC07 remote control is a versatile 4-button device capable of copying most fixed code remote controls operating at 433MHz or 315MHz frequencies. Its primary applications include:

• Electric Vehicles/Motorcycles: For remote start or alarm systems.
• Gate/Garage Door Openers: Convenient access to automated gates and garage doors.
• Home Security Monitoring: Integration with compatible security systems.
• Home Scene Applications: Controlling lighting fixtures, projection screens, electric doors, and windows.
• Agricultural Applications: Operating winches, sprinklers, and water pump remote controls.

Setup jeung Programming

Before copying, ensure the original remote control functions normally, its chip is compatible, and the frequency is correct. This remote control cannot copy two-way remote controls, rolling code remote controls, or IC program encrypted remote controls (e.g., HCS200, HCS201, HCS300, HCS301).

To determine the remote crystal frequency and chip model, you may need to disassemble the remote control shell and locate the information on the circuit board.

Step 1: Clear the Existing Code

Before copying a new remote, any existing code on the copy remote must be cleared. If not cleared, replication will not be possible.

1. Press and hold the two buttons for opening and closing the lock (typically the top two buttons) at the same time.
2. Keep holding until the indicator light flashes three times.
3. Then, release any one of the buttons and press it three times in a row (while still holding the other button).
4. The indicator light will flash quickly, indicating that the code is successfully cleared.
5. After the code is cleared, the indicator light will not light up when any button is short-pressed.

Step 2: Copy Pair

Once the copy remote is cleared, you can proceed with copying the desired remote control signal.

1. Hold the original remote control in one hand and the copy remote control (RA-RC07) in the other.
2. Bring the two remote controls close together.
3. Press the button on the original remote control that you wish to copy.
4. Simultaneously, press the corresponding button on the RA-RC07 copy remote control.
5. The LED indicator on the RA-RC07 will flash three times quickly and then stay on, indicating that the copy is successful.
6. Repeat this process to pair other buttons one by one.

Step 3: Recovery Coding (If needed)

If you accidentally clear the code or need to restore a previously copied code, you can use the recovery function.

• Press and hold the bell button and the lightning button (typically the bottom two buttons) of the copied remote control at the same time.
• Hold until the indicator light flashes quickly. This restores the remote control code that was cleared before.

Parentah Operasi

Once the remote control has been successfully programmed, simply press the desired button to activate the corresponding function (e.g., open/close gate, arm/disarm alarm).

penting: For optimal performance, ensure the remote control is within the effective operating range (approximately 25 meters in an interference-free environment) of the receiver.

Pangropéa

• Ngagantian batré: The remote control uses a 3V/1pcs 2032 button battery. When the remote's range decreases significantly or the indicator light becomes dim, it's time to replace the battery. Open the remote casing carefully to access and replace the battery, ensuring correct polarity.
• beberesih: Lap remot kontrol ku lawon anu lemes sareng garing. Hindarkeun nganggo bahan kimia anu keras atanapi pembersih anu abrasif.
• Panyimpenan: Store the remote control in a dry place, away from extreme temperatures and direct sunlight.
• Paparan cai: Alat ieu henteu tahan cai. Hindarkeun kakeunaan cai atanapi kalembaban anu luhur pikeun nyegah karusakan.

Pamérésan masalah

• Remote not copying:
  • Ensure the original remote is a fixed code type and not a rolling code or encrypted type (e.g., HCS series chips).
  • Verify that the existing code on the copy remote has been successfully cleared (indicator light should not light up on short press).
  • Make sure the original remote control is functioning correctly.
  • Ensure the two remote controls are held very close during the copying process.
  • Check for strong electronic signals or interference (e.g., mobile phones, transmission products) in the vicinity. Move to an area with less interference if necessary.
  • Confirm the frequency of the original remote matches the capabilities of the RA-RC07 (315MHz or 433MHz).
• Copied remote not working:
  • Re-attempt the "Copy Pair" process, ensuring the indicator light confirms successful copying.
  • Try the "Recovery Coding" step if you suspect the code was accidentally cleared.
  • Check the battery of the RA-RC07 remote.
  • Ensure you are within the effective operating range of the receiver.
• Jarak operasi pondok:
  • Replace the battery in the RA-RC07.
  • Ensure there are no obstructions or sources of interference between the remote and the receiver.

spésifikasi

Tip pamaké

• Optimal Copying Environment: Always perform the copying process in an area free from strong electronic interference to ensure successful duplication.
• Kahirupan batré: To maximize battery life, avoid continuously pressing buttons or storing the remote in a way that could accidentally activate buttons.
• Pariksa kasaluyuan: Before attempting to copy, always confirm that your original remote is a fixed code type and operates on either 315MHz or 433MHz. If unsure, consult the original remote's manual or manufacturer.
• Sababaraha Remotes: If you have multiple remotes to copy, clear the RA-RC07 remote before each new copying session to prevent signal conflicts.

Garansi sareng Rojongan

For any issues, questions, or support regarding your Universal RA-RC07 RF Remote Control, please contact the seller or retailer from whom you purchased the product. Keep your purchase receipt as proof of purchase.