Bubuka
Thank you for choosing the BUTURE BC02 Car Jump Starter with Air Compressor. This versatile device combines a powerful jump starter, a portable air compressor, a power bank, and an emergency light, making it an essential tool for any vehicle owner. Please read this manual carefully before use to ensure safe and optimal operation.
Figure 1: BUTURE BC02 Jump Starter and included accessories.
Émbaran Kasalametan penting
- Salawasna ngagem panyalindungan panon nalika damel sareng aki-aki.
- Do not allow the jump starter clamps to touch each other once connected to the device.
- Entong luncat ngamimitian batréna beku.
- Ensure the device is fully charged before use for optimal performance.
- Jauhkeun tina jangkauan barudak.
- Ulah ngalaan alat ka suhu ekstrim atawa beueus.
- Upami alat janten panas teuing nalika dianggo, langsung eureunkeun panggunaanana.
Eusi pakét
Mangga parios pakét kanggo barang-barang ieu:
- BUTURE BC02 Jump Starter with Air Compressor
- Batré Smart Clamps
- Selang hawa
- Nozzle Adapters (pikeun sagala rupa inflatables)
- Kabel Ngecas USB-C
- Manual pamaké
- Kantong Panyimpen
Setup sareng Ngecas Awal
Before first use, ensure the BUTURE BC02 is fully charged. The device features a large LED screen that displays the battery level.
- Connect the provided USB-C charging cable to the USB-C input port on the device.
- Connect the other end of the USB-C cable to a suitable USB wall adapter (not included) or car charger.
- The LED screen will indicate charging status and battery percentage. Charge until the screen shows 100%.
Figure 2: Charging the BC02 and using it as a power bank.
It is recommended to recharge the device every 3-6 months, even if not in use, to maintain battery health.
Parentah Operasi
1. Ngahurungkeun Kandaraan sacara Langsung
The BUTURE BC02 can jump start vehicles with up to 9.0L gas engines and 8.0L diesel engines.
- Pastikeun jump starter dicas cekap (sahenteuna 50% disarankeun).
- Selapkeun batré pinter clamp plug firmly into the jump starter's 12V output port. The indicator light on the clamp bakal flash beureum jeung héjo ganti.
- Sambungkeun beureum (+) clamp ka terminal positif (+) batré kendaraan.
- Sambungkeun hideung (-) clamp ka terminal négatif (-) batré kandaraan.
- Sakali nyambung kalayan leres, lampu indikator dina lampu pinter bakal hurungamp will turn solid green. If it flashes red or beeps, check connections or refer to the troubleshooting section.
- Hurungkeun kandaraan anjeun dina 30 detik.
- Sakali kendaraan dihurungkeun, langsung cabut konci smart clamp from the vehicle battery, then disconnect it from the jump starter.
Figure 3: Easy steps to jump start your vehicle.
Fungsi Force Start: If the battery is extremely low and the smart clamp does not show a solid green light, consult the troubleshooting section for instructions on using the force start function (if available and safe for your vehicle).
2. Using the 150PSI Air Compressor
The integrated air compressor can inflate tires and other inflatables up to 150 PSI with smart preset and auto-stop features.
- Pencét tombol daya pikeun ngaktipkeun alat.
- Connect the air hose to the inflation port on the device and tighten it.
- Attach the other end of the air hose to the item you wish to inflate (tire valve, ball needle, etc.). Use the appropriate nozzle adapter if necessary.
- Short press the 'M' button to enter inflation mode.
- Press 'M' again to cycle through inflation modes (Car, Motorcycle, Bicycle, Ball, Custom) or 'U' to change pressure units (PSI, BAR, KPA).
- Use the '+' and '-' buttons to set the desired pressure.
- Long press the power button for 3 seconds to start inflation. The compressor will automatically stop when the preset pressure is reached.
- Once inflation is complete, disconnect the air hose from the item and the device.
Figure 4: Steps for using the air compressor.
Inflation Pressure Ranges:
- Car: 26-51 PSI
- Motorcycle: 26-44 PSI
- Bicycle: 30-65 PSI
- Ball: 4-16 PSI
- Custom Inflation: 0-150 PSI
Figure 5: Recommended inflation ranges for various items.
3. Ngagunakeun salaku Power Bank Portabel
The BC02 can charge your electronic devices on the go.
- Connect your device's charging cable to the USB-A output port (5V/2.4A) on the jump starter.
- Jump starter bakal otomatis mimiti ngecas alat anjeun.
- The USB-C port can also be used for input (5V/2A, 9V/2A, 12V/1.5A) to recharge the jump starter itself.
Figure 6: Charging mobile devices with the BC02.
4. Lampu Darurat
Alat ieu dilengkepan lampu LED 500 lumen kalayan sababaraha modeu pikeun kaayaan darurat.
- Press the light button once for a steady flashlight.
- Press again for white strobe light.
- Press a third time for red strobe light (warning triangle).
- Press a fourth time for SOS signal.
- Press a fifth time to turn off the light.
Figure 7: Emergency light functions.
Pangropéa
- beberesih: Lap alatna ku lawon anu lemes sareng garing. Ulah nganggo bahan kimia anu kasar atanapi bahan anu kasar.
- Panyimpenan: Simpen alat dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
- Ngecas: Recharge the device every 3-6 months to maintain battery life, even if not in use.
- Perawatan batré: Hindarkeun sering-sering ngeusi batre.
Pamérésan masalah
spésifikasi
Tip pamaké
- Always keep the jump starter charged, especially before long trips or during cold weather.
- Familiarize yourself with the different inflation modes and pressure units before an emergency.
- Store the device in an easily accessible location in your vehicle.
- Test the emergency light functions periodically to ensure they are working.
Garansi sareng Rojongan
Kanggo inpormasi garansi, dukungan téknis, atanapi patarosan jasa, mangga ngahubungi penjual atanapi produsén langsung. Simpen resi pameseran anjeun salaku bukti pameseran.
