Rodedio R009 OBD2 Scanner Diagnostic Tool User Manual

Bubuka

The Rodedio R009 OBD2 Scanner is a powerful and user-friendly diagnostic tool designed to help you quickly and accurately identify issues with your vehicle. This device supports all OBD2 protocols and offers a wide range of functions, including reading and clearing diagnostic trouble codes (DTCs), viewing live data streams, performing I/M readiness tests, and more. Its multi-language support and extensive built-in DTC library make it an essential tool for both professional mechanics and car enthusiasts.

Fitur konci

• Modeu OBD2 lengkep: Supports all 10 modes of OBD2 functionality.
• Pariksa Lampu Mesin: Easily read and clear the Check Engine Light (CEL).
• Cék Smog: Perform I/M Readiness tests to check emission system status.
• Pilarian DTC: Access a built-in library of over 35,901 Diagnostic Trouble Codes for quick definitions.
• Aliran Data Langsung: View data sénsor sacara real-time tina kandaraan anjeun.
• Rojongan multi-basa: Antarbeungeut pangguna sayogi dina sababaraha basa.
• Nyolok sareng Puter: Simple connection and operation.

Setup sareng Sambungan

The Rodedio R009 OBD2 Scanner is designed for easy plug-and-play operation. Follow these simple steps to connect the device to your vehicle:

1. Manggihan Port OBD-II: The OBD-II port is usually located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's owner's manual if you cannot find it.
2. Sambungkeun scanner: With the vehicle's ignition off, firmly insert the Rodedio R009's OBD-II connector into your vehicle's OBD-II port.
3. Hurungkeun Ignition: Turn the vehicle's ignition to the "ON" position (do not start the engine). The scanner will power on automatically.
4. Pariksa sambungan: The scanner's screen will display a connection status. A successful connection will typically show a green checkmark or "Connected." If the connection fails, an exclamation mark or "Connection Error" may appear. Ensure the connector is securely seated and try again.

Parentah Operasi

Once connected, navigate the scanner's menu using the F1, F2, EXIT, OK, and arrow buttons.

Fungsi Menu Utama:

• Baca DTC: Reads current, pending, and permanent Diagnostic Trouble Codes.
• Hapus DTC: Clears all stored DTCs and turns off the Check Engine Light (CEL). Note: Clearing DTCs does not fix the underlying problem.
• Frame Frame: Displays a snapshot of vehicle operating conditions at the time an emission-related fault occurred.
• Abdi/Abdi: Mariksa kesiapan sistem ngawaskeun émisi.
• Inpormasi Kendaraan: Meunangkeun nomer idéntifikasi kendaraan (VIN), ID kalibrasi (CALID), sareng nomer verifikasi kalibrasi (CVN).
• Data Langsung: Némbongkeun aliran data real-time ti sénsor kandaraan.
• Modeu 6: Accesses results for on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored.
• Sénsor O2: Retrieves O2 hasil tés ngawas sensor.
• Modeu 8: Performs control of on-board system, test, or component.

Using DTC Lookup:

When a DTC is displayed, you can use the built-in DTC library to get a detailed definition:

1. Select "DTC Lookup" from the menu or press the appropriate button if available.
2. Enter the DTC code (e.g., P0113).
3. The scanner will display the definition, such as "Intake Air Temperature Sensor/Circuit High."

Viewing Live Data:

The Live Data Stream function allows you to monitor various sensor readings in real-time, which can be crucial for diagnosing intermittent problems.

1. Pilih "Data Langsung" tina ménu utama.
2. Choose the parameters you wish to monitor (e.g., Engine RPM, Intake Air Temperature, Ignition Timing Advance).
3. The data will be displayed numerically and often graphically, showing minimum and maximum values over time.

Pamérésan masalah

• Scanner teu hurung:
  • Ensure the OBD-II connector is firmly plugged into the vehicle's port.
  • Pariksa ignition kendaraan urang dina posisi "ON".
  • Check the vehicle's fuse for the OBD-II port (consult your vehicle's manual).
• "Connection Error" message:
  • Unplug and re-plug the connector securely.
  • Ensure the vehicle is OBD-II compliant (most vehicles manufactured after 1996 are).
  • Try the scanner on another OBD-II compliant vehicle to rule out a scanner issue.
• Cannot clear DTCs:
  • Ensure the ignition is "ON" and the engine is off.
  • If the underlying fault is still present, the DTCs may reappear immediately after clearing. Address the vehicle issue first.

Pangropéa

• beberesih: Lap pamindai ku lawon lemes,amp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Panyimpenan: Simpen alat dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Perawatan kabel: Avoid bending or crimping the OBD-II cable excessively to prevent damage.

Tip pamaké

• Setélan basa: The device supports multiple languages. If you need to change the language (e.g., to Russian or Turkish), navigate to the 'Setup' or 'Settings' menu on the device and select your preferred language.

spésifikasi

Garansi sareng Rojongan

Kanggo inpormasi garansi, dukungan téknis, atanapi patarosan jasa, mangga ngahubungi penjual atanapi produsén langsung. Simpen resi pameseran anjeun salaku bukti pameseran.