1. Bubuka
The Owon MSO7062TD is a versatile 2-in-1 Mixed Signal Oscilloscope (MSO) combining the functionalities of a Digital Storage Oscilloscope (DSO) and a Logic Analyzer (LA). Designed for a wide range of applications from circuit design and debugging to educational training, this instrument provides powerful signal analysis capabilities with an intuitive user interface.
This image displays the front panel of the MSO7062TD, showing the 8-inch color LCD, control knobs, function buttons, and input ports for both oscilloscope and logic analyzer channels.
2. Fitur konci
- 2-in-1 functionality: Digital Storage Oscilloscope (DSO) and Logic Analyzer (LA)
- 8-inch color LCD with TFT screen (640 × 480 pixels)
- USB data transmission support
- 20 group automatic measurement options
- Auto-scale function for quick setup
- FFT (Fast Fourier Transform) for frequency domain analysis
- 16 digital channels for logic analysis
3. Eusi Paket
Please verify that all items listed below are included in your package. If any items are missing or damaged, contact your supplier immediately.
- Kabel listrik
- CD Rom (Software and Documentation)
- Manual pamaké
- Kabel USB
- Oscilloscope Probes (2)
- Probe Adjust Tool
- Kantong lemes
- Logic Analyzer Module
This image shows the various accessories that come with the MSO7062TD, including probes, cables, and the logic analyzer module.
4. Setup Guide
4.1 Inspeksi Awal
Before powering on the device, inspect it for any visible damage that may have occurred during shipping. Ensure all connectors are clean and free from debris.
4.2 Sambungan Daya
- Connect the provided power cord to the AC input on the rear panel of the oscilloscope.
- Plug the other end of the power cord into a grounded AC power outlet (100-240V AC, 50Hz/60Hz).
4.3 Sambungan Panyilidikan
- For oscilloscope measurements, connect the BNC end of the probe to the desired channel input (CH1 or CH2) on the front panel.
- For logic analysis, connect the Logic Analyzer Module to its dedicated port and then connect the digital probes to the module.
5. Parentah Operasi
5.1 Daya Hurung/Pareuman
Press the power button located on the front panel to turn the device on or off. Allow a few seconds for the system to boot up.
5.2 Digital Storage Oscilloscope (DSO) Mode
The DSO mode allows you to visualize and analyze analog waveforms.
- Pilihan Saluran: Use the CH1/CH2 buttons to enable or disable channels.
- Skala Vertikal: Adjust the vertical sensitivity (Volts/div) using the VOLTS/DIV knobs for each channel.
- Horizontal Scale: Adjust the time base (Seconds/div) using the SEC/DIV knob.
- Trigger Setup: Use the TRIGGER controls to stabilize repetitive waveforms. Select trigger mode (Edge, Video, Alternate, Pulse, Slope) and adjust the trigger level.
- Auto-scale: Press the 'Auto' button for automatic waveform scaling and positioning.
5.3 Logic Analyzer (LA) Mode
The LA mode is used for analyzing digital signals across 16 channels.
- Sambungan modul: Ensure the Logic Analyzer Module is correctly connected.
- Channel Activation: Select the digital channels you wish to monitor.
- bangbarung Voltage: Set the appropriate threshold voltage for digital signal detection (±6V, 4 settings).
- Trigger Setup: Configure the trigger mode (Edge, Bus, State, Data Alignment, Data Width, Distributed Queue) to capture specific digital events.
- Tampilan Data: View the captured digital waveforms on the screen.
5.4 Automatic Measurements
The MSO7062TD offers 20 automatic measurement options. Access these through the 'Measure' menu to display parameters like Vpp, Vavg, Vrms, Frequency, Period, Rise Time, Fall Time, etc.
5.5 Waveform Math and FFT
Perform mathematical operations (+, -, ×, ÷) on waveforms or use the FFT function to analyze the frequency components of a signal.
5.6 USB Data Transfer
Connect the oscilloscope to a computer via the USB port to transfer waveform data, screenshots, or settings for further analysis or documentation.
6. Pangropéa
6.1 beberesih
Regularly clean the exterior of the oscilloscope with a soft, damp lawon. Ulah nganggo pembersih atanapi pangleyur anu abrasif. Pastikeun alatna pareum sareng dicabut tina colokan sateuacan dibersihkeun.
6.2 Panyimpenan
When not in use, store the oscilloscope in a dry, dust-free environment. Use the provided soft bag for protection during transport or storage.
6.3 Ngagantian sekering
If the device fails to power on, check the fuse. Replace it only with a fuse of the same type and rating (1A, T class, 250V).
7. Cara ngungkulan
- Henteu aya kakuatan: Check power cord connection, power outlet, and device fuse.
- Teu Aya Tampilan Gelombang: Ensure probes are correctly connected, channels are enabled, and input signals are within the device's range. Adjust vertical and horizontal scales.
- Unstable Waveform: Adjust trigger level and trigger mode. Ensure the signal is repetitive for stable triggering.
- Incorrect Measurements: Verify probe attenuation settings (1X, 10X, 100X, 1000X) match the physical probe setting.
- Masalah Sambungan USB: Ensure the USB cable is properly connected and the correct drivers are installed on your computer.
8. Spésifikasi
8.1 Digital Storage Oscilloscope Performance Specifications
| Parameter | Spésifikasi |
|---|---|
| Modél | MSO7062TD |
| Bandwidth | 60MHz |
| Sample Rate (real time) | 1GS/s |
| Naek Waktos | ≤5.8ns |
| tampilan | 8.0'' color LCD, TFT screen, 640 × 480 pixels |
| Saluran | dual + external trigger |
| Horizontal Scale (s/div) | 2ns/div - 100s/div, step by 1 - 2 - 5 |
| DC Accuracy (average) | average>16:±(3% reading+0.05div) for △V |
| Sensitipitas nangtung | 2mV/div - 10V/div |
| DC Keuntungan Akurasi | ± 3% |
| Resolusi nangtung (A/D) | 8 bit (2 saluran sakaligus) |
| Interpolasi | sin (x) / x |
| Max Input Voltage | 400V (DC + AC, PK - PK) |
| Probe Atenuasi Faktor | 1X, 10X, 100X, 1000X |
| Modeu pemicu | Edge, Video, Alternate, Pulse, Slope |
| Mode akuisisi | Normal, Peak Detect, and Average |
| Rékam Panjang | max 2M points |
| Waveform Storage | 4 waveforms |
| Pangukuran Otomatis | Vpp, Vavg, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Preshoot, Rise Time, Fall Time, Delay A→B↑, Delay A→B↓, +Width, -Width, +Duty, -Duty |
| Waveform Math | ＋, －, ×, ÷, FFT |
| Sasayogian tanaga | 100 - 240V AC, 50Hz / 60Hz, CATⅡ |
| Lissajou’s Figure Bandwidth | 60MHz |
| Lissajou’s Figure Phase Difference | ± 3 darajat |
| Antarbeungeut Komunikasi | USB2.0, USB host, and RS232 / VGA (optional) |
| sekering | 1A, T class, 250V |
| Ukuran (W × H × D) | 370 × 180 × 120 (mm) |
| Beurat (tanpa bungkusan) | 2.20 kg |
8.2 Logic Analyzer Performance Specifications
| Parameter | Spésifikasi |
|---|---|
| Modél | MSO7062TD |
| Sample Rate (real time) | 20S/s - 2GS/s |
| Bandwidth | 100MHz |
| Saluran | 16 |
| Rékam Panjang | Max 4M each channel |
| Input impedansi | 660KΩ ± 5%, in parallel with 15 ± 5pF |
| Modeu pemicu | Edge, Bus, State, Data Alignment, Data Width, Distributed Queue |
| Trigger Position Setting | Pre-trigger, Mid-trigger, and Re-trigger |
| bangbarung Voltage | ±6V (4 settings) |
| Input Sinyal Range | ± 30V |
| Pilarian Data | sadia |
| Sistem Data | binary, decimal, hex |
| Saringan Digital | 0, 1, 2 optional |
| Setting Storage | 10 setélan |
| USB Flash Disk Storage | sadia |
9. Tips pamaké
- Kalibrasi Probe: Always calibrate your oscilloscope probes before making critical measurements to ensure accuracy.
- Grounding: Ensure proper grounding of the oscilloscope and the circuit under test to prevent noise and ensure safety.
- Apdet parangkat lunak: Pariksa produsén urang website periodically for firmware updates to enhance performance and add new features.
- Experiment with Triggering: Master the various trigger modes to capture specific events and analyze complex signals effectively.
10. Garansi jeung Rojongan
This Owon MSO7062TD Mixed Signal Oscilloscope is covered by the manufacturer's standard warranty. Please refer to the warranty card included in your package or visit the official Owon websitus pikeun istilah jeung kaayaan jaminan lengkep.
For technical support, service, or inquiries, please contact your local distributor or the manufacturer's customer service department. Contact information can typically be found on the manufacturer's websitus atanapi dina dokuméntasi produk.
