Outsunny 84H-065V00GN

Outsunny 3 Tier Lean-to Mini Greenhouse Instruction Manual

Modél: 84H-065V00GN

1. Produk Langkungview

This Outsunny three-tier plastic greenhouse is designed to provide a protected environment for plants, flowers, and more. Its lean-to design allows it to be placed against a wall, making it suitable for both indoor and outdoor use. The reinforced PE cover offers protection from environmental elements while ensuring adequate sunlight for plant growth. Two roll-up zipped doors provide convenient access and facilitate ventilation.

Outsunny 3 Tier Lean-to Mini Greenhouse assembled with various plants
Figure 1: Assembled Outsunny 3 Tier Lean-to Mini Greenhouse.
Outsunny 3 Tier Lean-to Mini Greenhouse placed outdoors against a fence
Figure 2: Greenhouse in an outdoor setting, demonstrating its lean-to placement.

2. Setup & Majelis

Assembly of this mini greenhouse is straightforward, with 1-2 people recommended for efficient setup.

2.1 Komponén

Before starting, ensure all components are present and undamaged. Refer to the packaging list for a complete inventory.

2.2 Léngkah Majelis

  1. Majelis pigura: Connect the steel frame components according to the provided diagrams. Ensure all connections are secure.
  2. Pamasangan rak: Place the six wire shelves onto the designated tiers within the frame. Each shelf is designed to hold up to 15kg.
  3. Penempatan panutup: Drape the PE cover over the assembled frame. Ensure the cover is properly aligned and the hemmed edging is positioned correctly.
  4. Posisi: Place the greenhouse in its desired location. It features a lean-to-wall design and must be propped against a wall or sturdy structure for stability.
  5. Ngamankeun Basis: The cover includes an overlong edging (10cm width). For optimal seal and stability, bury this 10cm extended edge deep into the soil if placed outdoors. This helps prevent wind from lifting the greenhouse and provides better insulation.
Diagram showing the 3-tier plant stand with 6 wire shelves
Figure 3: Illustration of the 3-tier plant stand with 6 wire shelves.
Close-up showing the 10cm extended edging of the cover to be buried for stable standing
Figure 4: Detail of the 10cm extended edging for stable standing and sealing.
Technical drawing with overall dimensions: 143cm L x 46cm W x 141/151cm H, door 51cm W x 135cm H, top depth 51cm, edging 10cm
Figure 5: Overall dimensions of the mini greenhouse.

3. Parentah Operasi

3.1 Perlindungan Tutuwuhan

The PE cover is designed to offer heat preservation, protecting your plants from cold weather and acting as a bird-proof barrier. It allows sufficient sunlight to penetrate, creating an ideal growing environment.

Close-up of the PE cover highlighting features like heat preservation, bird proof, reinforced hemming, and tear proof
Figure 6: Features of the PE cover, including heat preservation and reinforced hemming.

3.2 Aksés jeung Ventilasi

The two roll-up doors provide easy access to your plants for watering, pruning, and general care. These doors can also be rolled up and secured to allow for good ventilation, which is crucial for preventing excessive humidity and promoting air circulation within the greenhouse.

Close-up of the roll-up doors with ties for easy access and ventilation
Figure 7: Roll-up doors for convenient access and ventilation.

4. Pangropéa

4.1 beberesih

Regularly clean the PE cover with a soft cloth and mild soapy water to ensure maximum light transmission. Avoid abrasive cleaners or brushes that could damage the material.

4.2 Pamariksaan

Periodically inspect the PE cover for any signs of wear, tear, or damage. The cover features reinforced hemming to prevent tearing, but prompt repair of any small holes can extend its lifespan. Check the steel frame for rust or loose connections and tighten as necessary.

4.3 Stabilitas

Ensure the greenhouse remains stable by regularly checking its lean-to position against a wall and verifying that the buried edging is still secure, especially after strong winds or heavy rain.

5. Cara ngungkulan

5.1 Kateustabilan

If the greenhouse feels unstable, ensure it is properly propped against a sturdy wall or structure. Verify that the 10cm extended edging of the cover is buried deep into the soil to provide a secure base.

5.2 Poor Ventilation / High Humidity

If you notice excessive humidity or poor air circulation, ensure the roll-up doors are opened sufficiently to allow fresh air to enter and stale air to escape. Adjust the opening based on external weather conditions and plant needs.

5.3 Insufficient Light

Ensure the PE cover is clean and free from dirt or debris that might block sunlight. Reposition the greenhouse if necessary to maximize sun exposure throughout the day.

6. Spésifikasi

FiturSpésifikasi
Nomer modél84H-065V00GN
WarnaHéjo
BahanSteel, PE
Ukuran Umum (L x W x H)143cm x 46cm x 141/151cm
Ukuran Pintu (W x H)Ukuran 51 x 135 cm
Wire Shelf Dimension (L x W x H)58cm x 46.5cm x 45cm (approximate tier height)
Lebar Tepi10 cm
Kapasitas Beurat Unggal Rak15 kg
Rekomendasi Majelis1-2 urang

7. Tips pamaké

  • nyiram: Monitor soil moisture regularly. The greenhouse environment can reduce evaporation, so adjust watering frequency accordingly.
  • Kontrol Suhu: Use the roll-up doors to regulate internal temperature. Open them on warm days to prevent overheating and close them at night or on cold days to retain heat.
  • Penempatan tutuwuhan: Place taller plants on the lower shelves and shorter plants or seedlings on higher shelves to ensure all plants receive adequate light.
  • Manajemén hama: Regularly inspect plants for pests. The enclosed environment can sometimes encourage certain pests, so early detection is key.

8. Jaminan & Dukungan

For any questions regarding assembly, operation, or maintenance of your Outsunny Mini Greenhouse, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase for any warranty claims.

Dokumén Patali - 84H-065V00GN

Praview Outsunny 84H-202V00 Mini Tangkuban Parahu Majelis Guide na Daptar Bagian
Parentah rakitan jeung daptar bagian pikeun Outsunny 84H-202V00 Mini Tangkuban Parahu. Struktur taman anu kompak, tahan UV ieu ngagaduhan panto gulung sareng jandéla bolong, cocog pikeun kembang, bibit, sareng pepelakan.
Praview Outsunny 84H-228V00/84H-228V01 Parentah Majelis Rumah Kaca
Pituduh assembly komprehensif pikeun Outsunny 84H-228V00 na 84H-228V01 lean-to rumah kaca, featuring 3 tiers jeung roll-up panto. Ngawengku daptar bagian jeung parentah hambalan-demi-hambalan pikeun assembly.
Praview Pot Outsunny Raised kalayan Pitunjuk Perakitan Panutup
Pituduh léngkah-léngkah pikeun ngarakit Outsunny Raised Planter with Cover (Modél IN231100318V01_GL / 84H-034V00), kalebet suku cadang, perangkat keras, sareng rincian dukungan palanggan.
Praview Outsunny 84H-033V00 Torowongan Majelis Tangkuban Parahu Parentah
Pitunjuk komprehensif pikeun ngarakit rumah kaca torowongan Outsunny 84H-033V00. Ngawengku daptar bagian lengkep, inventaris hardware, hambalan-demi-hambalan parentah visual ditarjamahkeun kana téks, sarta rojongan customer informasi kontak pikeun sababaraha wewengkon.
Praview Outsunny 3 Parentah Mini Tangkuban Parahu Majelis
parentah assembly lengkep pikeun Outsunny 3 tingkat Mini Tangkuban Parahu (Model 845-606 / 845-606V01). Ngawengku daptar bagian, pituduh léngkah-léngkah, sareng inpormasi pamakean anu penting. Estimasi waktos assembly nyaeta ngeunaan 1 jam.
Praview Outsunny 84H-065V00 3-Tier Parentah Majelis Tangkuban Parahu
Pituduh Majelis sareng daptar bagian pikeun Outsunny 84H-065V00 3-Tier Greenhouse. Ngawengku parentah hambalan-demi-hambalan, idéntifikasi bagian, sarta informasi kontak pikeun rojongan.