Intermatic NE1C Screw-In Photo Control Instruction Manual

Produk Leuwihview

The Intermatic NE1C Screw-In Photo Control is designed to automate the operation of incandescent lighting fixtures. It detects ambient light levels to automatically turn lights ON at dusk and OFF at dawn, providing convenience and energy savings.

Important: This device is designed exclusively for use with incandescent light bulbs. It is not compatible with CFL (Compact Fluorescent Lamp) or LED (Light Emitting Diode) light bulbs.

Émbaran Kasalametan

• Ensure power is OFF at the circuit breaker before installation or servicing.
• Do not exceed the maximum load rating of 150 Watts.
• For use with 120VAC, 60 Hz incandescent lighting only.
• Do not use with dimmers or other control devices unless specifically rated for such use.
• Keep the photocell sensor clear of obstructions and artificial light sources to ensure proper operation.

Eusi pakét

• 1 x Intermatic NE1C Screw-In Photo Control

Setup sareng Instalasi

1. Pareuman Daya: Before beginning installation, ensure the power to the light fixture is turned OFF at the circuit breaker or fuse box.
2. Hapus bohlam anu aya: Carefully remove the existing incandescent light bulb from the fixture.
3. Install Photo Control: Screw the Intermatic NE1C Photo Control into the standard incandescent light socket until it is snug. Do not overtighten.
4. Pasang Lampu Bohlam: Screw an incandescent light bulb (maximum 150 Watts) into the socket of the photo control.
5. Posisi: Ensure the photocell sensor (the small clear lens on the side of the control) is facing an area that receives natural daylight and is not obstructed by the fixture itself or any other objects. It should also be positioned away from any artificial light sources (e.g., other lamps, streetlights) that could interfere with its operation.
6. Mulangkeun Daya: Hurungkeun kakuatan deui ON di circuit breaker.

Image: The Intermatic NE1C Screw-In Photo Control, showing its screw-in base and integrated photocell sensor. This device is designed to be inserted into a standard light socket, with an incandescent bulb then screwed into the control itself.

Parentah Operasi

Once installed and powered, the Intermatic NE1C Photo Control operates automatically:

• Dusk Activation: When ambient light levels fall between 1 to 5 Foot-Candles (FC), the photo control will activate, turning the connected incandescent light bulb ON.
• Dawn Deactivation: When ambient light levels rise between 3 to 15 Foot-Candles (FC), the photo control will deactivate, turning the connected incandescent light bulb OFF.

There are no user-adjustable settings for light sensitivity on this model. Proper positioning of the photocell sensor is crucial for optimal performance.

Pangropéa

• beberesih: Periodically inspect the photocell sensor for dirt, dust, or debris. Gently wipe the sensor with a soft, dry cloth to ensure accurate light detection.
• Halangan: Ensure that no new obstructions (e.g., growing foliage, decorations) are blocking the photocell sensor.
• Ngagantian bohlam: When replacing the incandescent light bulb, ensure power is OFF at the circuit breaker before handling. Replace with an incandescent bulb of 150 Watts or less.

Pamérésan masalah

spésifikasi

Émbaran jaminan

This Intermatic NE1C Photo Control is covered by a 1-taun jaminan kawates from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, improper installation, or unauthorized modifications.

For warranty claims or further details, please refer to the official Intermatic warranty policy or contact customer support.

Rojongan Palanggan

For technical assistance, troubleshooting, or warranty inquiries, please contact Intermatic Customer Support:

• Websitus: www.intermatic.com
• Telepon: Refer to the Intermatic websitus pikeun nomer kontak ayeuna.

When contacting support, please have your product model number (NE1C) and date of purchase available.