MXR Bass D.I.+ Instruction Manual

Bubuka

The MXR M80 Bass D.I.+ is a robust and versatile preamp pedal engineered to provide bass players with a wide array of tonal possibilities for both live performances and studio recording. It features independent clean and distortion channels, a 3-band EQ, a noise gate, and multiple output options, making it an essential tool for any bassist.

Disetél

Before connecting the MXR Bass D.I.+, ensure all audio equipment is turned off to prevent damage. The pedal can be powered by a 9V battery or an external 9V DC power supply (not included).

Powering Unit

• Batré: Open the battery compartment on the bottom of the pedal and connect a 9V battery.
• Sasayogian tanaga: Connect a 9V DC power adapter (center negative) to the POWER jack on the side of the pedal.
• Kakuatan Phantom: The unit can also be powered via phantom power from a mixing console through the DIRECT OUTPUT (XLR) connection. Ensure the PHANTOM/GROUND switch is set appropriately.

Sambungan

• input: Connect your bass guitar to this 1/4-inch jack.
• OUTPUT: Connect this 1/4-inch jack to your bass ampinput liifier urang.
• DIRECT OUTPUT (XLR): Connect this XLR output to a mixing console or recording interface for a balanced, direct signal.
• PARALLEL OUTPUT: This 1/4-inch jack provides an unprocessed, buffered signal from your bass, useful for connecting to a tuner or a second amppangagung.

Kontrol Operasi

The MXR Bass D.I.+ features a comprehensive set of controls to shape your bass tone. Refer to Figure 3 for the layout of the controls.

Clean Channel Controls

• VOLUME BERSIH: Adjusts the overall output level of the clean channel.
• WARNA: Engages a preset EQ contour for a modern, scooped sound. This button illuminates when active.

Distortion Channel Controls

• JILID: Controls the output level of the distortion channel.
• adun: Mixes the distorted signal with the clean signal. Turn clockwise for more distortion, counter-clockwise for more clean tone.
• pemicu: Sets the threshold for the built-in noise gate. Higher settings require a stronger input signal to open the gate.
• NGASILKEUN: Adjusts the amount of distortion applied to the signal.

Bagéan EQ

• BASS: Nyaluyukeun réspon frékuénsi handap.
• MID: Nyaluyukeun réspon frékuénsi tengah.
• TREBLE: Nyaluyukeun réspon frékuénsi luhur.

Switches and Footswitches

• PHANTOM/GROUND: This switch controls the ground lift for the XLR output and enables phantom power operation. Set to 'Ground' to lift the ground and eliminate hum.
• GERBANG: Activates or deactivates the noise gate. The LED illuminates when the gate is active.
• EFFECT Footswitch: Toggles the entire effect (clean channel with EQ) on/off. The red LED indicates the effect is active.
• DISTORTION Footswitch: Engages or disengages the distortion channel. The red LED indicates distortion is active.

Pangropéa

To ensure the longevity and optimal performance of your MXR Bass D.I.+, follow these maintenance guidelines:

• beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun bagian luar pedal. Hindarkeun pembersih atanapi pangleyur anu abrasif.
• Panyimpenan: Simpen pedal di tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Ngagantian batré: If using battery power, replace the 9V battery when the pedal's performance degrades or the indicator LEDs dim. Disconnect the input cable when not in use to conserve battery life.
• Sambungan: Periodically check all cables and connections for wear and tear. Ensure jacks are free of dust and debris.

Pamérésan masalah

If you encounter issues with your MXR Bass D.I.+, refer to the following common problems and solutions:

• Henteu aya sora:
  • Pariksa sadaya sambungan kabel (input, output, daya).
  • Ensure the pedal is receiving power (check battery or power supply).
  • Verify that the EFFECT footswitch is engaged (red LED on).
  • Check the volume knobs on the pedal and your amppangagung.
• Hum atanapi Buzz:
  • Try engaging the PHANTOM/GROUND switch to lift the ground.
  • Ensure all power supplies are properly grounded and not interfering with other electronics.
  • Pariksa kabel faulty.
• Distortion Not Engaging:
  • Ensure the DISTORTION footswitch is engaged (red LED on).
  • Adjust the GAIN knob to a higher setting.
• Signal Cutting Out (Noise Gate):
  • If the GATE is active, lower the TRIGGER knob setting.
  • If the GATE is not desired, disengage the GATE switch.

spésifikasi

Garansi sareng Rojongan

For detailed warranty information and technical support, please refer to the official MXR or Dunlop Manufacturing websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.

Sumberdaya Online:

• Official MXR Websitus: www.jimdunlop.com/mxr/
• Dunlop Manufacturing Support: www.jimdunlop.com/support/