Buku Panduan Pangguna Termostat LUX Pro PSD111B Anu Henteu Tiasa Diprogram

1. Bubuka

This manual provides comprehensive instructions for the installation, operation, and maintenance of your LUX Pro PSD111B Non-Programmable Thermostat. This device is designed for residential use to control 1 Heat, 1 Cool HVAC systems, offering reliable and straightforward temperature management.

Figure 1: LUX Pro PSD111B Thermostat Front View

2. Fitur konci

• Pamasangan serbaguna: Can be installed in either horizontal or vertical orientation.
• Jelas tampilan: Fitur anu gampang-view backlit display for enhanced readability.
• Batré Dioperasikeun: Operates on 2 included AA alkaline batteries, ensuring reliable power.
• Unit Suhu: Choose between Fahrenheit or Celsius temperature display options.
• Kontrol anu tepat: Adjustable temperature swing settings with 9-step control for accurate temperature management.
• Safety Limits: Offers adjustable high and low temperature limits for customized comfort control.

Figure 2: Product Features Overview

3. Kasaluyuan Sistim

The LUX Pro PSD111B thermostat is designed for use with most 24-volt gas, oil, or electric heating and air conditioning systems, gas millivolt heating systems, and single-stage heat pumps. It is not compatible with 120-volt heating systems or two-stage pompa panas.

Figure 3: System Compatibility Chart

4. Naon dina Box

Your LUX Pro PSD111B Non-Programmable Thermostat package includes the following items:

• PSD111B Thermostat Unit
• 2 ST screws
• 2 jangkar témbok
• labél kawat
• Instruksi Manual
• 2 accu alkalin AA

angka 4: komponén kaasup

5. Setup jeung Instalasi

Before beginning installation, ensure the power to your HVAC system is turned off at the circuit breaker to prevent electrical shock or damage to the system.

5.1 Pasang Thermostat

1. Carefully remove your old thermostat. Take a photo of the existing wiring connections for reference.
2. Mount the new thermostat base plate to the wall using the provided screws and anchors. The thermostat can be installed in either horizontal or vertical orientation.
3. Feed wires through the back of the thermostat base and securely mount to the wall with supplied screws and anchors.

Gambar 5: Pilihan Pamasangan

5.2 Parentah Wiring

Refer to the wiring diagrams below for typical hookups. Use the provided wire labels to correctly identify and connect wires from your HVAC system to the corresponding terminals on the thermostat base.

Figure 6: Typical Wiring Diagrams

Figure 7: Detailed Wiring Hookups

5.3 Gas/Electric System Selection

Locate the small switch inside the thermostat unit. Slide the switch to the 'GAS' position for gas heating systems or 'ELEC' for electric heating systems (including heat pumps).

5.4 Pamasangan batré

Insert the two AA alkaline batteries into the battery compartment located at the bottom of the thermostat. Ensure correct polarity. Remove any protective tabs if present.

5.5 Majelis ahir

Once wiring and settings are complete, carefully snap the thermostat front cover onto the mounted base plate. Restore power to your HVAC system at the circuit breaker.

6. Parentah Operasi

The PSD111B is a non-programmable thermostat, offering simple manual control over your home's temperature.

6.1 Nyaluyukeun Suhu

Use the UP (▲) and DOWN (▼) arrow buttons on the front of the thermostat to set your desired temperature. The display will show the current room temperature and your set temperature.

Figure 8: Simple and Intuitive Control Panel

6.2 Pamilihan Mode Sistim

Use the SYSTEM switch located on the side of the thermostat to select the operating mode:

• PANAS: Ngaktipkeun sistem pemanasan nalika suhu kamar turun di handap suhu anu disetel.
• Pareuman: Pareuman duanana sistem pemanasan sareng penyejukan.
• Tiis: Ngaktipkeun sistem pendingin nalika suhu ruangan naék ngaleuwihan suhu anu disetel.

6.3 Pilihan Modeu Kipas

Use the FAN switch located on the side of the thermostat to select the fan operation mode:

• Otomatis: Kipas angin ngan ukur jalan nalika sistem pemanasan atanapi cooling aktip.
• ON: Kipas angin jalan terus, henteu paduli naha sistem pemanasan atanapi pendinginan aktip.

7. Pangropéa

7.1 Ngagantian batré

When the battery indicator appears on the display, replace the two AA alkaline batteries promptly. Open the battery compartment at the bottom of the thermostat, remove old batteries, and insert new ones, ensuring correct polarity. The thermostat retains settings during battery changes.

7.2 beberesih

Ngabersihan bagian luar thermostat ku lemes, damp lawon. Ulah make cleaners abrasive atawa pangleyur.

8. Cara ngungkulan

If your thermostat is not functioning as expected, consider the following:

• Henteu aya tampilan: Pariksa naha batréna leres dipasang sareng gaduh muatan anu cekap. Ganti lamun perlu.
• Sistem teu ngabales: Ensure the SYSTEM switch is set to HEAT or COOL, not OFF. Verify the fan switch is in the desired position (AUTO or ON). Check your circuit breaker for the HVAC system.
• Bacaan Suhu Lepat: Allow the thermostat to acclimate to the room temperature for at least 15 minutes after installation or significant temperature changes.
• Heating/Cooling Cycles Too Frequently/Infrequently: Adjust the temperature swing settings (9-step control) to fine-tune the cycle frequency.

9. Spésifikasi

10. Garansi jeung Rojongan

The LUX Pro PSD111B Non-Programmable Thermostat comes with a 5-year limited warranty. For support or warranty claims, please refer to the contact information provided in your owner's manual or visit the official LUX websitus.