Manual Instruksi Pangirim Tekanan Gauge VDO 360 006

1. Bubuka

This manual provides essential information for the safe and effective installation, operation, and maintenance of your VDO 360 006 Gauge Pressure Sender. Please read these instructions carefully and completely before attempting any installation or use. Retain this manual for future reference.

2. Produk Langkungview

The VDO 360 006 is a robust and reliable gauge pressure sender designed for accurate pressure measurement in various applications, particularly in automotive and industrial settings. This component features a 10mmx1.0mm thread for secure and precise connection to a pressure port, ensuring consistent performance and compatibility with VDO pressure gauges. It converts mechanical pressure into an electrical signal, allowing for real-time pressure monitoring.

VDO 360 006 Gauge Pressure Sender, showing the metal body, threaded base, and two electrical terminals on top.

This image displays the VDO 360 006 Gauge Pressure Sender. It is a cylindrical metal unit with a threaded base for connection to a pressure port. On the top, there are two electrical terminals with knurled black caps, designed for wiring to a compatible gauge and potentially an indicator light.

3. Naon dina Box

1x VDO 360 006 Gauge Pressure Sender (10mmx1.0mm)

4. Spésifikasi

Fitur	Rincian
Dimensi produk	7.5 x 5 x 1.75 inci
Nomer Modél Item	360 006
Tanggal Kahiji Sadia	9 Agustus 2010
Produsén	VDO
ASIN	B000NBAL9G
merek	VDO
Bahan	logam
Item Beurat	0.25 pon
UPC	754059004686

5. Setup jeung Instalasi

Proper installation is crucial for the accurate and safe operation of the pressure sender. If you are unsure about any step, consult a qualified technician.

5.1 Pancegahan Kasalametan

Ensure the engine or system is cool and depressurized before beginning installation.
Cabut batré kendaraan pikeun nyegah korsleting listrik.
Anggo alat pelindung pribadi (PPE), sapertos sarung tangan sareng panyalindungan panon.

5.2 Léngkah-léngkah Instalasi

Identipikasi Lokasi Pasang: Locate the appropriate pressure port on your engine or system. Ensure it matches the sender's 10mmx1.0mm thread.
Nyiapkeun Utas: Apply a suitable thread sealant (e.g., PTFE tape or liquid thread sealant) to the sender's threads to ensure a leak-free seal. Avoid getting sealant into the sensor opening.
Install Sender: Carefully thread the pressure sender into the port by hand to avoid cross-threading. Once hand-tight, use a wrench to tighten it securely. Do not overtighten, as this can damage the sender or the port.
Sambungan listrik: Connect the appropriate wiring from your pressure gauge to the terminals on the sender. Typically, one terminal connects to the gauge signal input, and the other (if present, often marked 'WK' for warning contact) connects to an indicator light. Refer to your gauge's wiring diagram for specific connections.
Wiring Aman: Ensure all electrical connections are tight and insulated to prevent shorts or corrosion. Route wiring away from hot or moving parts.
Sambungkeun deui Batré: Once all connections are secure, reconnect the vehicle's battery.
Sistem tés: Start the engine or activate the system and check for proper gauge operation and any leaks around the sender.

6. Parentah Operasi

The VDO 360 006 Gauge Pressure Sender operates by converting the applied fluid pressure into a variable electrical resistance. This resistance change is then interpreted by a compatible VDO pressure gauge, which displays the pressure reading. When the system is operational, the sender continuously transmits pressure data to the connected gauge.

Ensure the sender is correctly wired to a compatible VDO pressure gauge.
Monitor the gauge for expected pressure readings during system operation.
If equipped with a warning contact, an indicator light will illuminate if pressure drops below a predetermined safe level.

7. Pangropéa

The VDO 360 006 Pressure Sender is designed for long-term reliability with minimal maintenance. However, periodic checks can help ensure its continued accuracy and performance.

Inspeksi Visual: Periodically inspect the sender and its connections for any signs of physical damage, corrosion, or fluid leaks.
Sambungan listrik: Ensure all electrical connections remain clean and tight. Loose or corroded connections can lead to inaccurate readings.
Thread Seal: Check the threaded connection for any signs of leakage. If a leak is detected, the sender may need to be removed, re-sealed, and reinstalled.
beberesih: Keep the exterior of the sender clean from excessive dirt, oil, or debris. Use a soft cloth and mild cleaner if necessary.

8. Cara ngungkulan

If you experience issues with your VDO 360 006 Gauge Pressure Sender, refer to the following common problems and solutions:

Masalah	Mungkin Cukang lantaranana	Solusi
No pressure reading on gauge	kabel leupas atawa dipegatkeun gauge salah Sender failure Teu aya tekanan dina sistem	Pariksa sareng amankeun sadaya sambungan listrik. Test the gauge with a known good sender or power source. Replace the sender if other components are confirmed working. Verify system pressure.
Inaccurate or erratic readings	sambungan listrik goréng Masalah grounding Contaminated fluid Sender calibration drift (rare)	Inspect and clean all wiring and terminals. Ensure proper grounding of the gauge and sender. Check fluid quality and system for debris. Taroskeun ka teknisi upami masalah tetep.
Fluid leak at sender connection	Improperly tightened sender Benang ruksak Teu cukup thread sealant	Carefully tighten the sender (do not overtighten). Remove, inspect threads, reapply thread sealant, and reinstall. If threads are damaged, replace the sender or repair the port.
Warning light always on/off (if applicable)	Faulty warning contact wiring Incorrect pressure threshold Sender failure	Check wiring to the warning light. Verify the sender's warning pressure threshold is appropriate for your system. Replace the sender if the warning contact is confirmed faulty.

9. Garansi jeung Rojongan

VDO products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and claim procedures, please refer to the documentation provided with your purchase or visit the official VDO websitus.

For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact VDO customer service or your authorized VDO dealer. Contact information can usually be found on the VDO websitus atanapi bungkusan produk.

Sumberdaya Online: For additional information and product updates, visit the official VDO websitus: www.vdo-gauges.com

	VDO 356 Gauge Suluh/Suhu Gauge 100mm Pamasangan sareng Parentah Kabel rinci instalasi tur wiring parentah pikeun VDO 356 Gauge 100mm Suluh / Suhu Gauge, kaasup kasaluyuan pangirim jeung sambungan lampu warning.
	VDO ProCockpit 2 5/8 "(66mm) Parentah Instalasi Gauges parentah instalasi lengkep pikeun VDO ProCockpit 2 5/8 "(66mm) gauges, ngawengku listrik, tekanan mékanis, jeung tipe gauge suhu mékanis. Ngawengku daptar bagian, diagram wiring, sarta hidayah ningkatna.
	VDO Suluh Level Pangirim Panungtun Instalasi parentah instalasi komprehensif pikeun VDO Suluh Level Pangirim, kaasup pangaluyuan pikeun sagala rupa bojong tank jeung pilihan ningkatna. Nyertakeun precautions kaamanan sarta informasi jaminan.
	VDO M1 WR Cycle Computer User Manual Manual pamaké komprehensif pikeun komputer siklus VDO M1 WR, detailing instalasi, operasi, setelan, fungsi, ngungkulan, sarta spésifikasi teknis.
	Katalog Produk VDO: Solusi pikeun Armada sareng Bengkel Katalog produk komprehensif ti VDO nampilkeun tachographs, tombol unduh, solusi manajemén armada, alat bengkel, sareng asesoris pikeun kendaraan komersial. Ngawengku rinci ngeunaan DTCO 4.1, DTCO 3.0a, sénsor laju, sareng jasa VDO Armada.
	Manual Pamaké VDO TPMS Go Manual pamaké komprehensif pikeun alat VDO TPMS Go, rinci spésifikasi, kaamanan, operasi, program, setelan, ngungkulan, sarta informasi jaminan.

VDO 360 006