1. Bubuka jeung Leuwihview
Thank you for choosing the Steinel BRS 66 L Motion Sensor Bathroom Light. This high-quality luminaire is designed for automatic illumination in bathrooms and other suitable indoor/outdoor areas, offering convenience and energy efficiency. Featuring a high-frequency sensor with 360° detection, an elegant aluminum chassis, and an opal glass globe, this light is rated IP44, making it splash-proof and ideal for damp lingkungan.
Figure 1: The Steinel BRS 66 L light seamlessly integrated into a modern bathroom setting.
2. Parentah Kasalametan
- Pamasangan listrik: Installation must be carried out by a qualified electrician in accordance with national wiring regulations and local electrical codes.
- Pegatkeun daya: Always disconnect the power supply at the main fuse box before commencing any installation, maintenance, or repair work.
- Voltage: Mastikeun suplai voltage matches the specifications of the luminaire.
- Peunteun IP44: This product is rated IP44, meaning it is protected against solid objects over 1mm and against splashing water from any direction. It is suitable for bathroom zones 2 and 3. Do not install in bathroom zone 1 (directly above bath/shower).
- Jenis bohlam: Use only G9 halogen bulbs with a maximum wattage of 40W. Do not exceed the specified wattage.
- Panas: Halogen bulbs generate heat. Ensure adequate ventilation and do not cover the luminaire.
3. Eusi Paket
Please check that all parts are present and undamaged:
- Steinel BRS 66 L Luminaire (with integrated sensor)
- Hardware dipasang (screws, colokan témbok)
- Instruksi Manual
4. Setup jeung Instalasi
Turutan léngkah ieu pikeun pamasangan anu aman sareng leres:
- Nyiapkeun pikeun Instalasi: Pastikeun catu daya utama ka area pamasangan dipareuman dina pemutus sirkuit.
- Pasang Dasar: Mark the drilling points on the wall or ceiling using the luminaire's base as a template. Drill holes and insert the provided wall plugs. Secure the luminaire's mounting base to the surface using the screws.
- Wiring: Connect the electrical wires (Live, Neutral, Earth) from your mains supply to the corresponding terminals on the luminaire's terminal block. Ensure all connections are secure and correctly insulated.
- Attach the Luminaire Body: Carefully attach the main body of the luminaire to the mounting base, ensuring it is securely fastened.
- Selapkeun Bohlam: Gently insert two G9 halogen bulbs (max. 40W each) into their respective sockets.
- Attach Glass Globe: Carefully place the opal glass globe over the bulbs and secure it according to the fixture's design (e.g., by twisting or using retaining clips).
- Mulangkeun Daya: Once installation is complete and all parts are securely in place, restore power at the circuit breaker.
Figure 2: The high-frequency sensor provides 360° detection, indicated by the wave pattern.
Figure 3: Key features of the BRS 66 L, including its high-frequency sensor and IP44 protection.
5. Parentah Operasi
The Steinel BRS 66 L features an integrated high-frequency motion sensor for automatic operation.
- Otomatis Hurung/Pareum: Once power is supplied, the light will automatically turn on when motion is detected within its 360° detection zone and turn off after a set delay when no further motion is detected.
- adjustment sénsor: The sensor's sensitivity (reach) and twilight threshold (when the light should activate based on ambient light) can be adjusted. These adjustments are typically made via small dials or switches located on the sensor unit, often accessible by carefully removing the glass globe. Refer to the detailed diagrams in the full manual for precise locations.
- Penempatan optimal: For best performance, ensure the light is placed where its 360° detection field is not obstructed by large objects.
6. Pangropéa
- beberesih: To clean the luminaire, ensure the power is disconnected. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or glass.
- Ngagantian bohlam: If a bulb fails, disconnect the power supply. Carefully remove the glass globe and then the faulty G9 bulb. Insert a new G9 halogen bulb (max. 40W). Reattach the glass globe and restore power.
- Cék biasa: Periodically check the mounting screws for tightness and the electrical connections for any signs of wear or damage.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lampu henteu hurung. | Taya catu daya. Bohlam salah. Sensor settings incorrect (e.g., twilight threshold too high). | Check circuit breaker and wiring. Ngaganti bohlam. Adjust sensor's twilight setting. |
| Lampu terus hurung. | Gerak konstan dideteksi. Sénsor lepat. Kasalahan kabel. | Check for continuous movement in detection zone. Contact customer support if sensor is suspected faulty. Pariksa sambungan kabel. |
| Light turns on too frequently/not frequently enough. | Sensor sensitivity (reach) set too high/low. | Adjust the sensor's sensitivity dial to decrease or increase detection range. |
| Cahya ngageleber. | Sambungan leupas. Bohlam teu cocog. Fluktuasi kakuatan. | Pariksa sambungan kabel. Ensure correct G9 halogen bulb is used. Konsultasi ka tukang listrik upami dicurigai aya fluktuasi daya. |
8. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Nomer modél | BRS 66 |
| merek | Steinel |
| Indéks panyalindungan | IP44 |
| Bahan | Aluminum chassis, Opal glass globe |
| Tipe rengse | Chrome |
| Jumlah Bulbs | 2 |
| Max. Electrical Power | 40 Watts per bulb (Total 80W) |
| Jenis Bohlam | halogén |
| Jenis Soket | G9 |
| Fitur bohlam | Otomatis Hurung / Pareum |
| Tipe sénsor | High-frequency motion sensor |
| Sudut deteksi | 360° |
| Mangpaat husus | Indoor and Outdoor (Bathroom, Hallway, etc.) |
| Beurat produk | 1.28 kg |
9. Garansi jeung Rojongan
Steinel products are manufactured to the highest quality standards. For information regarding the warranty period and terms, please refer to the documentation provided with your purchase or visit the official Steinel website. For technical support, spare parts, or service inquiries, please contact your local Steinel dealer or customer service department. Always provide the model number (BRS 66) when seeking support.
