Steinel HS502

Steinel HS502 Halogen Sensor Floodlight Instruction Manual

Modél: HS502

1. Bubuka

Thank you for choosing the Steinel HS502 Halogen Sensor Floodlight. This product is designed for outdoor use, providing reliable illumination with integrated motion detection for enhanced security and convenience. Please read this manual carefully before installation and operation to ensure safe and optimal performance.

The HS502 features a robust aluminum housing, a powerful 500W halogen bulb, and an intelligent sensor system with a wide detection range and adjustable settings.

2. Parentah Kasalametan

  • Kasalametan listrik: Installation must be performed by a qualified electrician in accordance with national wiring regulations and local electrical codes. Ensure the power supply is disconnected before any installation or maintenance work.
  • Voltage: This floodlight operates on 230 Volts. Verify your power supply matches this requirement.
  • Panas: Halogen bulbs generate significant heat. Do not touch the floodlight or bulb immediately after use. Ensure adequate clearance from flammable materials.
  • Peunteun IP44: The floodlight is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but should not be submerged in water.
  • Ngagantian bohlam: Always use a 500W R7s halogen bulb. Disconnect power and allow the unit to cool completely before replacing the bulb.
  • Pamasangan: Mount the floodlight securely on a stable surface.

3. Eusi Paket

Punten parios yén sadaya komponén aya:

  • Steinel HS502 Halogen Sensor Floodlight unit
  • Halogen bulb (R7s, 500W)
  • Hardware dipasang (screws, colokan témbok)
  • Manual Pitunjuk (dokumén ieu)

4. Instalasi jeung Setup

Alat anu diperyogikeun: Drill, screwdriver, wire strippers, voltage panguji.

  1. Pegatkeun daya: Sateuacan ngamimitian, pastikeun catu daya utama ka daérah pamasangan dipareuman dina pemutus sirkuit.
  2. Lokasi Pasang: Choose a suitable outdoor location for wall mounting. Consider the desired detection area for the sensor. The floodlight should be mounted securely.
  3. Pasang Bracket: Attach the mounting bracket to the wall using the provided screws and wall plugs.
  4. Wiring: Connect the electrical wires (Live, Neutral, Earth) from your power supply to the corresponding terminals within the floodlight's wiring compartment. Ensure all connections are secure and correctly insulated. Refer to the wiring diagram inside the unit if available.
  5. Attaching the Floodlight: Secure the floodlight unit to the mounting bracket.
  6. Pamasangan bohlam: Carefully insert the 500W R7s halogen bulb into its socket. Do not touch the glass part of the bulb with bare hands; use a clean cloth or gloves to avoid oil residue which can shorten bulb life.
  7. Sambungan Daya: Once installation is complete and all covers are securely fastened, restore power to the circuit.
Steinel HS502 Halogen Sensor Floodlight mounted on a wall, showing the silver housing and sensor lens.

Image 1: Steinel HS502 Halogen Sensor Floodlight. This image shows the floodlight's silver housing and the integrated sensor lens, typically mounted on an exterior wall.

5. Operasi

The Steinel HS502 operates automatically once power is supplied and settings are configured. The integrated motion sensor detects movement within its adjustable range and activates the floodlight for a set duration.

Sensor Adjustments:

The sensor features a Steinel Duo sensor and a multilingual lens, allowing for precise configuration. Adjustments are typically made via control dials located on the sensor unit.

  • Rentang deteksi: The sensor has a maximum range of up to 12 meters. It can be limited to approximately 5 meters for smaller areas.
  • Sudut deteksi: The sensor offers a 180° detection angle with a 90° opening angle.
  • Sensor Head Adjustment: The sensor head can be adjusted vertically by 40° and horizontally by 30° to fine-tune the detection area.
  • Time Setting (Light ON Duration): This dial controls how long the floodlight remains illuminated after motion is detected. The adjustable range is from 10 seconds to 15 minutes.
  • Twilight Setting (Lux Level): This dial determines the ambient light level at which the sensor becomes active. For example, setting it to a low lux value means the light will only activate in near darkness, while a higher lux value will allow it to activate in brighter conditions.

Experiment with these settings to achieve the desired performance for your specific environment.

6. Pangropéa

  • beberesih: Periodically clean the floodlight housing and sensor lens with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur. Pastikeun kakuatan dipegatkeun saméméh beberesih.
  • Ngagantian bohlam:
    1. Disconnect power to the floodlight.
    2. Ngidinan unit pikeun niiskeun lengkep.
    3. Open the floodlight housing (refer to installation steps in reverse if needed).
    4. Carefully remove the old R7s halogen bulb.
    5. Insert a new 500W R7s halogen bulb, handling it with a clean cloth or gloves.
    6. Close the housing securely and restore power.
  • Pamariksaan: Regularly inspect the floodlight for any signs of damage, loose connections, or wear. Address any issues promptly.

7. Cara ngungkulan

MasalahMungkin Cukang lantarananaSolusi
Lampu henteu hurung.Taya catu daya.
Blown bulb.
Sensor settings incorrect (e.g., too high lux setting during daylight).
Check circuit breaker and wiring.
Ngaganti bohlam.
Adjust twilight setting (Lux) on the sensor.
Lampu terus hurung.Gerak kontinyu dideteksi.
Time setting too long.
Gangguan sénsor.
Adjust sensor detection area or sensitivity.
Reduce time setting.
Kontak rojongan customer lamun masalah persists.
Lampu hurung tanpa aya gerakan anu katingali.Sensor too sensitive.
Detection of small animals, moving branches, or heat sources.
Sensor head misaligned.
Reduce sensor sensitivity (if adjustable).
Adjust sensor head angle to exclude unwanted detection areas.
Lampu kedip-kedip atanapi taram.Sambungan kabel leupas.
Bohlam salah.
Voltage turun naek.
Check all wiring connections (power off first!).
Ngaganti bohlam.
Taroskeun ka tukang listrik.

8. Spésifikasi

ModélSteinel HS502
Sasayogian tanaga230 volt
Max. Konsumsi Daya500 Watt
Jenis BohlamR7s Halogen (500W included)
Kelas panyalindunganI
Protéksi Ingress (IP) PeunteunIP44 (Ditangtayungan tina cipratan cai)
Sudut deteksi180° (with 90° opening angle)
Rentang deteksiUp to 12 meters (adjustable to approx. 5 meters)
adjustment sirah sénsor40 ° nangtung, 30 ° horizontal
Setélan Waktos10 detik - 15 menit
Bahan Perumahanalumunium
Warnapérak
Ukuran (L x W x H)23.5 x 22 x 15.5 cm
Beurat2.58 kg

9. Garansi jeung Rojongan

Steinel products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Steinel website. In case of technical issues or questions not covered in this manual, please contact Steinel customer support or your local dealer.

Pabrikan: STEINEL Vertrieb GmbH

Rujukan produk: HS502

Dokumén Patali - HS502

Praview Steinel XLED CAM 1 Manual pamaké SC jeung Guide Instalasi
Pituduh komprehensif pikeun Steinel XLED CAM 1 SC sensor-switched lampu sorot LED, ngawengku instalasi, konfigurasi, pamakéan, sarta ngungkulan. Diajar ngeunaan fitur-fiturna, spésifikasi téknis, sareng cara ngoperasikeunana via Aplikasi Steinel CAM.
Praview STEINEL IR 2180 UP ECO Sensor-Schalter Bedienungsanleitung
Umfassende Bedienungsanleitung für den STEINEL IR 2180 UP ECO Bewegungsmelder und Sensor-Schalter. Enthält Informationen zur Installation, Funktion, technischen Daten und Garantie für Innenbereiche.
Praview STEINEL LS 150 S / LS 150 LED-Strahler mit Bewegungsmelder - Bedienungsanleitung
Umfassende Bedienungsanleitung für den STEINEL LS 150 S und LS 150 LED-Strahler mit Bewegungsmelder. Enthält Installationsanweisungen, Sicherheitshinweise, Funktionserklärung und Fehlerbehebung.
Praview STEINEL L 605 S / L 605 LED Sensorleuchte - Bedienungsanleitung
Umfassende Bedienungsanleitung für die STEINEL L 605 S und L 605 LED Sensorleuchten. Erfahren Sie mehr über Installation, Funktionen, Sicherheitshinweise und Fehlerbehebung für diese Innen- und Außenleuchten mit Bewegungsmelder.
Praview STEINEL XLED Home 2 Serie: LED-Flutlicht mit Bewegungsmelder – Installations- und Bedienungsanleitung
Umfassende Anleitung für die STEINEL XLED Home 2 Serie, einschließlich XLED home 2, XL, SL und Connect. Erfahren Sie mehr über Installation, Funktionen, Vernetzung und die STEINEL Smart Remote App für intelligente Außenbeleuchtung.
Praview Manual Pamasangan Sensor Gerak Infrabeureum STEINEL IS 2180-2
Pituduh lengkep pikeun masang sareng ngoperasikeun sénsor gerak infrabeureum STEINEL IS 2180-2, anu nampilkeun rentang, waktos, sareng sensitivitas cahaya anu tiasa disaluyukeun pikeun kontrol cahaya anu tiasa dipercaya.