Buku Panduan RAB Lighting LFP16A Sleek Floodlight

1. Produk Langkungview

The RAB Lighting LFP16A Sleek Floodlight is designed for outdoor illumination, providing efficient and durable lighting. This fixture accommodates a PAR16 type bulb and features a robust die-cast aluminum housing with a powder-coated finish for enhanced durability and weather resistance.

Fitur konci:

• Designed for 60W PAR16 bulbs, delivering 650 lumens output (bulb not included).
• Durable die-cast aluminum housing with a powder-coated finish.
• Gasket and O-ring seals provide resistance against weather elements.
• Integrated shield helps reduce glare.
• Equipped with a 1/2" NPS threaded arm for secure mounting and a locking swivel for adjustable positioning.

Figure 1: RAB Lighting LFP16A Sleek Floodlight. This image shows the floodlight fixture with its threaded arm and wiring, highlighting its compact and durable design.

2. Émbaran Kasalametan

Mangga baca sareng ngartos sadaya parentah sateuacan masang atanapi ngoperasikeun produk ieu. Paranti nuturkeun parentah ieu bisa ngakibatkeun shock listrik, seuneu, atawa bahaya sejenna nu bisa ngabalukarkeun karuksakan harta atawa tatu pribadi.

• Kasalametan listrik: Always disconnect power at the circuit breaker or fuse box before wiring or servicing the fixture.
• Tukang listrik anu mumpuni: Pamasangan kedah dilakukeun ku tukang listrik anu mumpuni saluyu sareng sadaya kode listrik lokal sareng nasional.
• Grounding: Pastikeun perlengkapanna dipasang dina ground anu leres pikeun nyingkahan bahaya listrik anu poténsial.
• Jenis bohlam: Use only PAR16 type bulbs with a maximum wattage of 60W. Exceeding the maximum wattage can cause overheating and damage to the fixture.
• Lokasi baseuh: This fixture is suitable for wet locations. Ensure all connections are properly sealed and waterproofed during installation.
• Suhu: Do not install near combustible materials or surfaces that may be affected by heat.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• RAB Lighting LFP16A Sleek Floodlight Fixture (1)
• Buku Panduan (1)

Note: Light bulb and wire connectors are not included and must be purchased separately.

4. Setup jeung Instalasi

This floodlight is designed for wall mounting and features a 1/2" NPS threaded arm for secure attachment to a junction box or mounting accessory. Follow these steps for proper installation:

1. Nyiapkeun pikeun Instalasi:
   • Pareuman daya dina pemutus sirkuit sateuacan ngamimitian padamelan listrik naon waé.
   • Gather necessary tools: screwdriver, wire strippers, electrical tape, silicone sealant (for waterproofing).
2. Pasang Perlengkapan:
   • Thread the 1/2" NPS arm of the floodlight into a compatible outdoor junction box or mounting plate. Ensure a tight and secure connection.
   • Use the locking swivel to adjust the initial angle of the fixture.
   

   Figure 2: Detail of the 1/2" NPS threaded arm and 180-degree adjustable swivel. This illustrates the mounting mechanism and flexibility of the floodlight.
3. Sambungan Wiring:
   • Connect the black wire from the fixture to the hot (black) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (white) wire from the power supply.
   • Connect the bare copper or green wire from the fixture to the ground wire from the power supply.
   • Secure all connections with appropriate wire connectors and electrical tape. For outdoor installations, consider using silicone-filled wire nuts for added moisture protection.
4. Pasang Bulb:
   • Carefully insert a PAR16 bulb (max 60W) into the fixture socket. Do not overtighten.
5. Seal and Test:
   • Ensure all connections are secure and the fixture is properly sealed against moisture. Apply silicone sealant around the mounting base if necessary.
   • Restore power at the circuit breaker and test the floodlight's operation.

5. Parentah Operasi

Once installed and powered, the RAB Lighting LFP16A Floodlight operates by the control of the circuit it is connected to (e.g., a wall switch, timer, or photocell). There are no direct controls on the fixture itself.

• Nyaluyukeun Arah Cahaya: The fixture features a locking swivel arm. To adjust the light direction, loosen the locking nut on the swivel, position the floodlight as desired, and then tighten the locking nut securely.
• Ngurangan sorotan: The built-in shield is designed to minimize glare, directing light effectively to the intended area.

Gambar 3: Kelample of the LFP16A floodlight used in a landscape setting, demonstrating its illumination capabilities.

6. Pangropéa

Pangropéa rutin ngajamin kinerja optimal sareng umur panjang lampu sorot anjeun.

• beberesih: Bersihkeun bagian luar perlengkapan sacara berkala nganggo lap anu lemesamp lawon. Ulah nganggo pembersih atanapi pangleyur anu abrasif, sabab ieu tiasa ngaruksak lapisan akhir. Pastikeun daya pareum sateuacan dibersihkeun.
• Ngagantian bohlam:
  1. Pareuman daya ka stop kontak di pemutus sirkuit.
  2. Allow the old bulb to cool completely before handling.
  3. Carefully unscrew and remove the old PAR16 bulb.
  4. Insert a new PAR16 bulb (max 60W) into the socket, ensuring it is seated correctly.
  5. Mulangkeun kakuatan sareng uji bohlam énggal.
• Pamariksaan: Annually inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

The RAB Lighting LFP16A Sleek Floodlight comes with a 1-taun jaminan produsén urang ti tanggal beuli. Garansi ieu nyertakeun cacad dina bahan sareng pagawean dina panggunaan normal.

For warranty claims, technical support, or further assistance, please contact RAB Lighting customer service. Refer to the official RAB Lighting websitus pikeun inpo kontak panganyarna.

Pabrikan: Pencahayaan RAB

Websitus: www.rablighting.com (Kelample link, link sabenerna bisa rupa-rupa)