Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your Rugged Ridge Heavy Duty Steering Box Brace, Model 18021.02. Designed for 1976-1986 Jeep CJ7 and CJ8 models equipped with power steering, this brace is engineered to enhance steering stability by holding the steering box firmly in place under extreme stress. Please read all instructions carefully before beginning installation.
Image: The Rugged Ridge Heavy Duty Steering Box Brace, featuring a black powder-coated bar with a clamp on one end and a mounting bracket on the other.
Émbaran Kasalametan
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Always wear appropriate personal protective equipment, such as safety glasses and gloves, during installation. Ensure the vehicle is securely supported on jack stands before working underneath. Disconnect the battery before performing any electrical work. Follow all local safety regulations and guidelines.
Spésifikasi produk
| Atribut | Rincian |
|---|---|
| Nomer modél | 18021.02 |
| Ngaran produk | Heavy Duty Steering Box Brace |
| merek | Rugged Ridge |
| Bahan | Baja |
| Tipe rengse | Kacap Lambang Hideung |
| Ukuran produk (L x W x H) | 23 x 5 x 1 inci |
| Item Beurat | 3 pon |
| Kasaluyuan | 1976-1986 Jeep CJ7 and CJ8 with power steering |
| UPC | 804314076856 |
| Negara asal | Taiwan |
Instalasi (Setélan)
This section outlines the general steps for installing the Rugged Ridge Steering Box Brace. Specific vehicle configurations may vary, and professional installation is recommended if you are unsure about any steps.
Alat anu diperyogikeun:
- Set rengkuh standar
- Set stop kontak
- rengkuh torsi
- Jack jeung jack nangtung
- Kacamata kaamanan sareng sarung tangan
- WD-40 or similar lubricant (optional, for stubborn bolts)
Léngkah-léngkah pamasangan:
- Parkirkeun kendaraan dina tempat anu datar sareng stabil teras pencet rem parkir.
- Safely lift the front of the vehicle using a jack and support it securely with jack stands.
- Locate the steering box on the driver's side frame rail.
- Identify the mounting points for the steering box brace. One end of the brace will attach to the frame, often utilizing an existing shackle hanger bolt, and the other end will clamp around the steering gearbox.
- Loosely install the frame-side bolt(s) for the brace. Some users report needing a coarse-thread 7/16" x 14 bolt for the rear hole on the passenger side, as the supplied bolt may be fine-thread.
- Posisi clamp end of the brace around the steering gearbox.
- Install the bolts, washers, and nuts for the clamp end, ensuring a snug fit around the gearbox.
- Once all bolts are in place, progressively tighten all fasteners to the manufacturer's recommended torque specifications. Ensure the brace is securely holding the steering box without causing undue stress or misalignment.
- Turunkeun kendaraan kalayan aman.
- Test the steering for proper operation and ensure no new noises or vibrations are present.
Note: Some installations may require minor adjustments or modifications due to vehicle age or previous modifications.
Operasi
The Rugged Ridge Steering Box Brace is a passive component designed to reinforce the steering box mounting. Once properly installed, it operates continuously to reduce flex and movement of the steering box, contributing to improved steering feel and reduced "steering wander" or "death wobble" common in older Jeep CJ models.
No active user operation is required after installation. The brace works in conjunction with your existing power steering system to provide a more stable and responsive steering experience.
Pangropéa
Regular inspection of the steering box brace is recommended to ensure continued performance and safety.
Jadwal pangropéa:
- Every 3 months or 3,000 miles (whichever comes first):
- Visually inspect the brace for any signs of damage, cracks, or corrosion.
- Check all mounting bolts for tightness. Re-torque if necessary according to the vehicle's service manual or general automotive torque specifications for the bolt size.
- Ensure the brace is not interfering with any other vehicle components.
- After any off-road excursion:
- Perform a quick visual inspection for impacts or damage from debris.
Clean the brace periodically with mild soap and water to remove dirt and grime, especially if exposed to harsh conditions like road salt or mud. The black powder-coated finish is designed for durability but can be compromised by severe impacts or prolonged exposure to corrosive elements without cleaning.
Pamérésan masalah
This section addresses common issues that may arise after installing the steering box brace.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Steering still feels loose or has excessive play. |
|
|
| New noises or vibrations after installation. |
|
|
| Difficulty installing bolts or achieving proper fit. |
|
|
If issues persist, contact Rugged Ridge customer support or consult a qualified automotive technician.
Video Produk Resmi
Video: An official video from Rugged Ridge showcasing the spirit of adventure associated with Jeep vehicles and the range of accessories they offer. This video highlights the lifestyle aspect of Jeep ownership and the role of Rugged Ridge products in enhancing that experience.
Garansi sareng Rojongan
Rugged Ridge products are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty information included with your product packaging or visit the official Rugged Ridge websitus.
For technical assistance, installation questions, or warranty claims, please contact Rugged Ridge customer support:
- Websitus: www.RuggedRidge.com
- Telepon: Rujuk kana websitus pikeun nomer kontak ayeuna.
- Surélék: Rujuk kana websitus pikeun email kontak.
Nalika ngahubungi dukungan, punten sayagikeun nomer modél produk anjeun (18021.02) sareng inpormasi pameseran.
