1. Bubuka
This user manual provides essential information for the safe and effective use of your Eiko FCB 120V 600W T-4 R7s Base Halogen Bulb. This high-performance lamp is designed for various applications requiring bright, white light. Please read this manual thoroughly before installation and operation, and retain it for future reference.
2. Émbaran Kasalametan
WARNING: Halogen bulbs operate at high temperatures and can cause burns or fire if not handled properly. Always allow the bulb to cool completely before handling.
- Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves when handling.
- Ensure the power supply is disconnected before installing, removing, or cleaning the bulb.
- Use only in fixtures rated for the bulb's wattage jeung voltage (600W, 120V).
- Do not use if the glass envelope is scratched or cracked.
- Jauhkeun tina bahan anu gampang kaduruk.
- Buang bohlam anu dipaké nurutkeun peraturan lokal.
3. Produk Langkungview
The Eiko FCB 120V 600W T-4 R7s Base Halogen Bulb is a high-quality lamp featuring a robust tungsten filament designed to produce a brighter, whiter light. Its T-4 shape and R7s base make it suitable for specific lighting fixtures.
4. Spésifikasi
| Spésifikasi | Nilai |
|---|---|
| merek | Eiko |
| Nomer modél | FCB |
| Tipe Lampu | halogén |
| Wattage | 600 watt |
| Voltage | 120 volt |
| Ukuran Bentuk Bohlam | T4 |
| Tipe Dasar | R7 |
| Suhu Warna | 3200 Kelvin |
| Warna Cahaya | Bodas caang |
| Bahan | Tungsten |
| Dimensi produk | 1 x 1 x 2.7 inci |
| Item Beurat | 0.353 ons |
| UPC | 031293031006 |
5. Setup / Installation
Follow these steps to safely install your Eiko FCB halogen bulb:
- Pastikeun Daya Pareum: Before beginning, turn off the power to the fixture at the circuit breaker or fuse box. Verify that the fixture is completely de-energized.
- Ngidinan Cooling: If replacing an existing bulb, allow the old bulb to cool down completely before touching it.
- Maké sarung tangan: Handle the new bulb with a clean, lint-free cloth or gloves. Avoid touching the glass envelope directly with bare hands.
- Cabut Bulb Old (upami aya): Carefully remove the old R7s base bulb from its spring-loaded socket. Gently push one end into the socket and pull the other end out.
- Selapkeun Bohlam Anyar: Align the R7s pins of the new bulb with the corresponding slots in the fixture's socket. Gently push one end of the bulb into its socket, then compress the spring-loaded mechanism to allow the other end to slide into place. Ensure both ends are securely seated.
- Mulangkeun Daya: Sakali bohlam parantos dipasang kalayan aman, balikkeun deui kakuatan ka lampuna.
- Tes: Hurungkeun saklar lampu pikeun mastikeun operasi anu leres.
6. Parentah Operasi
The Eiko FCB halogen bulb operates immediately upon receiving power. Simply turn on the light switch connected to the fixture to illuminate the bulb. There are no special operating procedures beyond standard electrical safety practices.
- Ensure the fixture's switch is in the 'OFF' position before connecting power.
- Turn the switch to 'ON' to activate the bulb.
- For optimal bulb life, avoid frequent on/off cycling.
7. Pangropéa
Proper maintenance can extend the life and performance of your halogen bulb:
- beberesih: If the bulb's glass becomes dirty or smudged, turn off the power and allow the bulb to cool completely. Gently wipe the glass with a clean, dry, lint-free cloth. Do not use liquid cleaners.
- ngagantian: Halogen bulbs dim over time. For best performance, consider replacing bulbs when their light output noticeably decreases. Always replace with a bulb of the same wattage jeung voltage (FCB 120V 600W T-4 R7s Base).
- Pamariksaan: Periodically inspect the bulb and fixture for any signs of damage or wear.
8. Cara ngungkulan
If you encounter issues with your Eiko FCB halogen bulb, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Bohlam teu hurung | Taya kakuatan pikeun fixture Bohlam teu leres seated Bohlam diduruk Faulty fixture or switch | Pariksa pemutus sirkuit/sekring Ensure bulb is fully inserted Ganti bohlam Taroskeun ka tukang listrik |
| Bohlam kedip-kedip | Sambungan leupas Saklar dimmer anu salah (upami aya) Voltage turun naek | Turn off power and re-seat bulb Ensure dimmer is compatible with halogen Taroskeun ka tukang listrik |
| Bulb kaduruk kaluar gancang | Frequent handling of glass Leuwih-voltage Geter kaleuleuwihi Ventilasi goréng dina fixture | Handle with gloves/cloth Pariksa fixture voltage Ensure stable mounting Check fixture for proper airflow |
If the problem persists after attempting these solutions, please contact a qualified electrician or the manufacturer's support.
9. Garansi jeung Rojongan
Eiko products are manufactured to high standards and are designed for reliable performance. For information regarding warranty coverage, technical support, or replacement parts, please refer to the official Eiko websitus atanapi ngahubungan departemén layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun salaku bukti pameseran.
Eiko Customer Support: Mangga didatangan www.eiko.com for contact information and further assistance.
