Skil F015 9780 AA Angle Grinder 2000 W 230 mm User Manual

1. Bubuka sarta Émbaran Kasalametan

This manual provides essential instructions for the safe and effective operation, maintenance, and setup of your Skil F015 9780 AA Angle Grinder. Please read this manual thoroughly before using the tool to ensure your safety and prevent damage.

Pedoman Kasalametan Umum

• Salawasna nganggo alat pelindung pribadi (PPE) anu cocog, kalebet kacamata kaamanan, panyalindungan dédéngéan, sarung tangan, sareng masker lebu.
• Pastikeun wewengkon gawé beresih, cahayana alus, sarta bebas tina halangan.
• Jauhkeun jalma-jalma, khususna murangkalih, tina tempat damel.
• Never operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Salawasna pegatkeun sambungan colokan listrik ti sumber listrik samemeh nyieun sagala pangaluyuan, ngaganti asesoris, atawa nyimpen alat.
• Secure the workpiece firmly before starting any operation.
• Ulah maksakeun alat; hayu alat nu ngalakukeun pagawean di speed na dimaksudkeun.
• Regularly inspect the power cord for damage. If damaged, have it repaired by a qualified professional.

Produk Leuwihview

The Skil F015 9780 AA is a powerful angle grinder designed for heavy-duty applications such as grinding metal and cast iron, deburring, flattening weld seams, making deep cuts in metal, brushing metal, and cutting concrete or slabs. It features a 2000 W motor and accommodates discs up to 230 mm in diameter.

Gambar 1.1: Hareupeun view of the Skil F015 9780 AA Angle Grinder equipped with a diamond cutting disc. The tool features a robust housing, a red power button, and a protective guard.

2. Setélan

2.1 Ngagantelkeun cecekelan samping

The side handle can be adjusted into three positions for optimal comfort and control. Screw the side handle firmly into one of the threaded holes on the gear housing. Ensure it is tightened securely before operation.

2.2 Installing/Changing the Grinding/Cutting Disc

1. Pastikeun alat dicabut tina sumber listrik.
2. Pencét jeung tahan tombol konci spindle pikeun nyegah spindle ti puteran.
3. Use the accessory key (spanner) to loosen the clampmur ku cara muterkeunana ngalawan arah jarum jam.
4. Leupaskeun clamping nut and the old disc.
5. Clean the flanges and the new disc. Place the new disc onto the lower flange, ensuring it is correctly seated.
6. Ganti clamping nut and tighten it clockwise using the accessory key while holding the spindle lock button. Do not overtighten.

Gambar 2.1: Deukeut view of hands demonstrating the process of changing a grinding disc on the Skil angle grinder. An accessory key is used to loosen the clamping nut while the spindle lock is engaged.

2.3 Adjusting the Protective Guard

The protective guard must always be used and adjusted to ensure maximum safety during operation. Loosen the guard's clamping screw, rotate the guard to cover the maximum possible area of the disc towards the operator, and then securely tighten the clampobeng.

3. Parentah Operasi

3.1 Ngahurungkeun/Pareuman

• To switch on: Press the ON/OFF switch.
• To switch off: Release the ON/OFF switch. For continuous operation, press the switch and then press the lock-on button. To switch off from continuous operation, press the ON/OFF switch again.

3.2 Téhnik grind jeung motong

Always hold the angle grinder firmly with both hands. Apply moderate pressure and allow the disc to do the work. Avoid excessive pressure, which can lead to kickback or disc damage.

Image 3.1: A person wearing safety glasses, ear protection, and a dust mask, using the Skil angle grinder to cut a concrete slab. The grinder is held firmly, and sparks are visible, indicating active cutting.

When cutting metal, ensure sparks are directed away from your body and flammable materials. For concrete or masonry, use appropriate diamond cutting discs and consider wet cutting methods to reduce dust, if applicable to your model and disc type.

Image 3.2: A person operating the Skil angle grinder to cut a metal pipe, producing a shower of sparks. The operator is wearing protective gloves, and the tool is held securely with both hands.

4. Pangropéa

4.1 beberesih

Regularly clean the ventilation slots of the angle grinder to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use water or chemical cleaning agents.

4.2 Panyimpenan

Store the tool in a dry, secure place out of reach of children. Ensure the power cord is not kinked or damaged during storage.

4.3 Ngagantian Sikat Karbon

This model may feature user-replaceable carbon brushes. If the motor performance decreases significantly or sparks become excessive, the carbon brushes may need replacement. Refer to a qualified service technician or the detailed service manual for specific instructions, as improper replacement can damage the tool.

5. Cara ngungkulan

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Skil customer support or an authorized service center.

6. Spésifikasi

7. Garansi jeung Rojongan

Specific warranty information for your Skil F015 9780 AA Angle Grinder may vary by region and purchase date. Please refer to the warranty card included with your product or visit the official Skil websitus pikeun istilah jeung kaayaan jaminan lengkep.

For technical support, spare parts, or service inquiries, please contact your local Skil service center. Contact information can typically be found on the Skil websitus atawa dina dokuméntasi disadiakeun kalawan alat Anjeun.

Pabrikan: Skil

ASIN: B0014GS23Q