Eiko DT50/35/RS

Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb User Manual

Model: DT50/35/RS

1. Bubuka

This manual provides essential information for the safe and effective use of your Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb. Please read these instructions carefully before installation and retain for future reference.

The Eiko DT50/35/RS is a 50-watt compact fluorescent (CFL) bulb, also referred to as a compact fluorescent halogen bulb, featuring a Duo-Tube design and a 2G11 base. It produces a 3500K cool white light with 4300 lumens brightness, suitable for various lighting applications.

Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb

Figure 1: Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb. This image shows the elongated, dual-tube design of the bulb with its 2G11 base at the bottom.

2. Parentah Kasalametan

WARNING: To prevent electric shock or burns, always turn off the power supply before installing or replacing the bulb.

  • Pastikeun lampu bohlamna cocog jeung watt-natage (50W).
  • Ulah make jeung dimmers iwal eksplisit dinyatakeun salaku cocog.
  • Handle the bulb by its base to avoid touching the glass, as oils from skin can reduce bulb life.
  • If the bulb breaks, ventilate the room and carefully clean up the broken glass and mercury according to local regulations.
  • Jauhkeun tina jangkauan barudak.

3. Setup jeung Instalasi

  1. Pareuman Daya: Locate the light fixture's power switch and turn it off. For added safety, turn off the circuit breaker controlling the fixture.
  2. Cabut Bulb Old (upami aya): If replacing an existing bulb, allow it to cool completely before carefully removing it from the fixture.
  3. Identify Base Type: Confirm your fixture uses a 2G11 base. The Eiko DT50/35/RS bulb has a 2G11 4-pin base.
  4. 2G11 Base Diagram

    Figure 2: Diagram of a 2G11 base. This illustration shows the four-pin configuration of the 2G11 lamp base, indicating its shape and pin arrangement for proper insertion.

  5. Pasang Bulb Anyar: Align the four pins of the Eiko DT50/35/RS bulb with the corresponding slots in the fixture's 2G11 socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
  6. Mulangkeun Daya: Once the bulb is securely installed, turn the circuit breaker back on, then turn on the light switch.

4. Parentah Operasi

The Eiko DT50/35/RS bulb operates like a standard fluorescent lamp. Once installed in a compatible fixture and power is supplied, it will illuminate when the fixture's switch is turned on.

  • Pemanasan Awal: Bohlam fluoresensi butuh sababaraha waktos kanggo ngahontal kacaangan pinuh, khususna dina lingkungan anu langkung tiis.
  • Ngalihkeun / Pareuman: Frequent switching on and off can reduce the lifespan of fluorescent bulbs. It is recommended to leave the light on for longer periods when possible.

5. Pangropéa

  • beberesih: Ensure the power is off and the bulb is cool before cleaning. Gently wipe the bulb with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
  • ngagantian: Replace the bulb when it reaches the end of its life (flickering, dimming, or failure to light). Always turn off the power before replacing.
  • pembuangan: This compact fluorescent bulb contains a small amount of mercury. Dispose of it according to local, state, and federal regulations. Many retailers and municipalities offer recycling programs for CFLs. Do not dispose of in regular household trash.

6. Cara ngungkulan

MasalahMungkin Cukang lantarananaSolusi
Bohlam teu hurung.Taya kakuatan pikeun fixture nu.
Bohlam teu leres seated.
Bulb is faulty or at end of life.
Fixture ballast is faulty.
Pariksa switch kakuatan sarta circuit breaker.
Turn off power, re-seat bulb firmly.
Ngaganti bohlam.
Taroskeun ka tukang listrik anu mumpuni.
Bohlam kedip-kedip.Bohlam deukeut tungtung hirup.
Dimmer teu cocog.
Sambungan leupas.
Cold environment.
Ngaganti bohlam.
Remove dimmer or replace with compatible bulb/fixture.
Turn off power, check bulb seating.
Allow time for warm-up.
Bohlam taram.Bohlam deukeut tungtung hirup.
Salah wattage pikeun perlengkapan.
Ngaganti bohlam.
Ensure fixture and bulb wattage cocog.

7. Spésifikasi

FiturRincian
merekEiko
Nomer modélDT50/35/RS
Tipe LampuCompact Fluorescent Halogen (CFL)
Wattage50 Watt
Tipe Dasar2G11 (4-pin)
Suhu Warna3500 Kelvin (Bodas Tiis)
Caang4300 Lumén
WangunT4 (Duo-Tube)
DiménsiKira-kira 1 x 1 x 2.7 inci
Item Beurat3.2 ons
BahanTungsten

8. Garansi jeung Rojongan

Specific warranty information for Eiko products may vary. Please refer to the original product packaging or the official Eiko websitus pikeun detil jaminan panganyarna.

For technical support or further inquiries, please contact Eiko customer service through their official channels. Contact information can typically be found on the manufacturer's websitus atanapi bungkusan produk.

Pabrikan: Eiko

Nomer Bagian: DT50/35/RS

UPC: 031293493040

Dokumén Patali - DT50/35/RS

Praview Pitunjuk Pamasangan Tabung Linier EIKO LED T8
Pitunjuk pamasangan anu lengkep pikeun lampu EIKO LED T8 Tipe B Linear Tube, anu ngawengku tindakan pencegahan kaamanan, pangropéa, sareng diagram kabel anu lengkep pikeun masang deui luminer fluoresensi.
Praview EIKO LHS1 Series LED Linear High Bay Installation Instructions
Comprehensive installation guide for the EIKO LHS1 Series LED Linear High Bay fixtures, covering overview, safety precautions, mounting options, wiring diagrams, and controls.
Praview EIKO VL1 Series LED Volumetric Troffer Installation Instructions
Comprehensive installation guide for the EIKO VL1 Series LED Volumetric Troffer, covering overview, safety precautions, installation steps, wiring schematics, and sensor installation. Includes power and CCT selection.
Praview Sensor Peredupan Bi-Level Microwave EIKO Z10 sareng Panduan Pemasangan Fotosel
Pituduh pamasangan lengkep pikeun Sensor Dimming Bi-Level Microwave EIKO Z10 sareng Photocell, anu ngajelaskeun spésifikasi, cakupan sensor, sareng inpormasi patuh FCC pikeun setelan sareng operasi anu leres.
Praview EIKO CSX1 Series LED Commercial Strip Premium Installation Instructions
Comprehensive installation guide for the EIKO CSX1 Series LED Commercial Strip Premium fixtures, covering surface mount, chain mount, and optional accessory installations.
Praview Pitunjuk Pamasangan Kanopi Permukaan EIKO LED Pasagi
Dokumén ieu nyayogikeun pitunjuk pamasangan anu lengkep pikeun fixture EIKO LED Surface Canopy Square, anu ngawengku tindakan pencegahan kaamanan, pemasangan permukaan, kabel sisi, pemasangan mandiri, pangaturan daya, sareng pamasangan sensor Z10.