1. Bubuka
This manual provides essential information for the safe and efficient use of the Eltako EVA12-32A AC Current Meter. Please read this manual thoroughly before installation and operation.
2. Émbaran Kasalametan
PERHATOSAN: Installation and maintenance of this device should only be performed by a qualified electrician. Incorrect installation can lead to electric shock, fire, or damage to the device and other equipment.
- Salawasna pegatkeun listrik sateuacan masang atanapi ngalayanan méteran.
- Pastikeun sadaya sambungan aman sareng saluyu sareng kode listrik lokal.
- Ulah ngaleuwihan arus dieusian jeung voltage ratings of the device.
- The device is designed for indoor use in dry environments.
3. Produk Langkungview
The Eltako EVA12-32A is an AC current meter designed for DIN rail mounting. It measures active energy consumption and displays it on an integrated screen. The device stores consumption data in non-volatile memory.
Fitur konci:
- Energy consumption display with integrated screen.
- Measures active energy as an AC current meter.
- Data stored in non-volatile memory.
- Low standby loss: only 0.5 W.
- Designed for DIN rail mounting.
Gambar 1: Eltako EVA12-32A AC Current Meter, showing the display and terminal connections from an angled perspective.
4. Pamasangan
The Eltako EVA12-32A is designed for easy mounting on a DIN rail within an electrical panel. It is strongly recommended that installation be carried out by a qualified electrician.
Léngkah-léngkah pamasangan:
- Pegatkeun daya: Before starting, ensure the main power supply to the electrical panel is completely disconnected. Verify with a voltage panguji.
- Pamasangan: Snap the meter onto the DIN rail in the desired position.
- Wiring: Connect the phase (L) and neutral (N) wires according to the markings on the device.
- The terminals labeled L are for the input and output of the phase wire. The device measures current flowing through this connection. Ensure the cross-section of these wires is equal to or greater than the existing phase cable in the electrical panel.
- The terminal labeled N is for the neutral connection, which powers the meter. A smaller cross-section cable (e.g., 1.5mm²) can be used for this connection.
- Maximum cable size without terminals is 6mm². Note that the cable insertion depth is relatively small.
- Sambungan Aman: Kencengkeun sadaya sekrup terminal pageuh pikeun nyegah sambungan anu leupas, anu tiasa nyababkeun panas teuing atanapi gangguan fungsi.
- Pamulihan kakuatan: Once all connections are secure and verified, restore power to the electrical panel.
Gambar 2: Hareupeun view of the Eltako EVA12-32A AC Current Meter, showing the digital display and control buttons.
5. Operasi
After successful installation and power-up, the Eltako EVA12-32A will begin measuring and displaying energy consumption.
Pintonan sareng Napigasi:
- The integrated screen displays various parameters, including active energy (kWh), current (A), voltage (V), and power (W).
- Use the "MODE" and "SELECT" buttons (refer to Figure 2) to cycle through the displayed values and access historical data (e.g., hourly, daily, monthly, yearly consumption).
- The meter stores consumption data in non-volatile memory, ensuring data retention even during power outages.
Catetan penting:
- The display is not backlit. For optimal readability, ensure the meter is installed in a well-lit area.
- This meter is not MID-certified and therefore not approved for monetary electricity billing in Europe. It is intended for informational purposes and internal consumption monitoring.
6. Pangropéa
The Eltako EVA12-32A is designed for maintenance-free operation. However, periodic checks are recommended.
- beberesih: If necessary, gently wipe the exterior of the meter with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Pariksa sambungan: Periodically, and only after disconnecting power, verify that all electrical connections remain tight and free from corrosion.
- Kaayaan Lingkungan: Pastikeun lingkungan operasi tetep dina kisaran suhu sareng kalembaban anu ditangtukeun.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Paparanana kosong | No power supply; incorrect wiring; device malfunction. | Check power supply to the meter. Verify wiring connections (L and N). If power is present and wiring is correct, the device may be faulty. |
| Bacaan anu salah | Incorrect wiring; faulty current path; device malfunction. | Ensure phase (L) and neutral (N) are correctly connected. Verify that the current is flowing through the L terminals as intended. |
| Tampilan anu hésé dibaca | Cahaya lingkungan anu teu cekap. | Relocate the meter to a brighter area or provide additional lighting. The display is not backlit. |
8. Spésifikasi
- model: EVA12-32A
- Pabrikan: Eltako
- Tipe: AC Ayeuna Méter
- Max ayeuna: 32 A
- Kaleungitan sayaga: 0.5 W
- Ukuran (L x W x H): 9.1 x 7 x 2.5 cm
- beurat: 5 gram
- MID Conformity: Not applicable (not approved for monetary billing)
- Jumlah modél: 4912093
9. Garansi jeung Rojongan
The Eltako EVA12-32A comes with a 1-taun kasadiaan suku cadang. For warranty claims or technical support, please contact your retailer or the manufacturer directly.
For further assistance, please refer to the official Eltako websitus atanapi ngahubungan departemén layanan palanggan maranéhna.
