1. Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your Arc Audio FD2200 2-Channel Car Amppanguat. Mangga baca manual ieu sacara saksama sateuacan nyobian masang atanapi ngoperasikeun amplifier to ensure proper function and safety.
2. Émbaran Kasalametan
Salawasna perhatikeun pancegahan kaamanan di handap ieu:
- Disconnect the vehicle's battery before making any electrical connections.
- Pastikeun sadaya kabel dihubungkeun sareng diamankeun kalayan leres pikeun nyegah karusakan atanapi korsleting.
- Hindarkeun masang ampsimpen di tempat anu kakeunaan sinar panonpoé langsung, panas anu kaleuleuwihi, kalembaban, atanapi lebu.
- Anggo kabel gauge anu pas pikeun sambungan daya sareng ground pikeun nyegah panas teuing.
- Consult a professional installer if you are unsure about any aspect of the installation.
3. Produk Langkungview
The Arc Audio FD2200 is a high-performance 2-channel car amplifier designed to deliver clear and powerful audio. It features robust construction and advanced protection circuits.
Image 1: Arc Audio FD2200 2-Channel Car Amplifier. This image displays the top view tina amplirén, nuduhkeuncasing its black and silver casing with the Arc Audio logo and model number.
Fitur konci:
- 12dB stereo crossover with x10 range switch (55Hz to 5.5KHz)
- High/low/full range selector switch
- Mono/stereo/bridged select feature
- 18dB bass control at 45Hz
- Protection against reverse voltage, leuwih voltage, speaker short, and thermal overload
- konstruksi beurat-tugas
4. Setup jeung Instalasi
Pamasangan anu leres penting pisan pikeun kinerja sareng kaamanan anu optimal. Disarankeun pikeun ngagaduhan ieu amplifier dipasang ku profésional mumpuni.
4.1 Lokasi Pamasangan
Pilih lokasi pamasangan nyaéta:
- Garing jeung well-ventilated.
- Protected from direct sunlight and excessive heat.
- Secure and free from vibrations.
- Diaksés pikeun wiring sarta pangaluyuan.
4.2 Sambungan Wiring
Turutan tungtunan ieu pikeun sambungan listrik:
- Kakuatan (B+): Connect a fused power cable directly from the positive terminal of the vehicle's battery to the amplifier's B+ terminal. Ensure the fuse is located within 18 inches of the battery.
- Taneuh (GND): Sambungkeun kabel ground anu pondok sareng kandel tina ampterminal GND lifier kana permukaan logam anu bersih sareng teu acan dicét dina chassis kendaraan.
- Jauh (REM): Sambungkeun kawat péngkolan jauh tina kaluaran jauh unit sirah anjeun ka ampterminal REM liifier.
- Input RCA: Sambungkeun kabel RCA tina unit sirah anjeunamp outputs kana ampjacks input RCA lifier urang.
- Kaluaran Speaker: Sambungkeun kabel speaker tina amplifier's speaker terminals to your speakers. Observe correct polarity (+ to + and - to -).
5. Parentah Operasi
Sakali dipasang, éta amplifier requires proper configuration for optimal audio performance.
5.1 Gain adjustment
Kontrol gain cocog jeung ampsensitipitas input lifier kana output head unit anjeun. Mimitian ku gain anu disetel ka minimum teras laun-laun tambahkeun dugi ka anjeun ngadangu distorsi, teras eureunkeun sakedik.
5.2 Setélan kawin silang
Use the 12dB stereo crossover with the x10 range switch to set the desired frequency range for your speakers. The high/low/full range selector switch allows you to choose the appropriate mode:
- Lulus Tinggi: Filters out low frequencies, suitable for full-range speakers or tweeters.
- Pass Lemah: Filters out high frequencies, suitable for subwoofers.
- rentang pinuh: Allows all frequencies to pass through, typically used for full-range speakers without a separate subwoofer.
5.3 Bass naekeun
The 18dB bass control at 45Hz can be used to enhance low-frequency output. Use this feature sparingly to avoid distortion and potential speaker damage.
5.4 Mono/Stereo/Bridged Select
This switch allows you to configure the amplifier for different output modes:
- Stereo: Standard 2-channel operation for two speakers.
- Mono: Combines both channels into a single output, typically for a single subwoofer.
- Sasak: Combines the power of both channels into a single, higher-power output, usually for a single, high-power subwoofer. Refer to the specifications for bridged power output.
6. Pangropéa
The Arc Audio FD2200 amplifier merlukeun pangropéa minimal pikeun mastikeun kinerja jangka panjang.
- Tetep dina ampbersih sareng bébas tina lebu sareng kokotor. Anggo lawon anu lemes sareng garing pikeun ngabersihkeun.
- Pastikeun ventilasi nyukupan di sabudeureun éta amplifier to prevent overheating. Do not block cooling fins.
- Périodik pariksa sagala sambungan kabel pikeun tightness sarta korosi.
7. Cara ngungkulan
Upami anjeun ngalaman masalah sareng anjeun ampLifier, tingal masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya Daya / Taya Sora | Sekring putus, kabel listrik/ground/remote kendor, ampLifier dina modeu panyalindungan. | Check fuses (battery and amplifier). Verify all power, ground, and remote connections are secure. Check for short circuits in speaker wiring. |
| Sora Distort | Gain set luhur teuing, setélan crossover teu bener, sinyal input kualitas goréng. | Reduce gain. Adjust crossover settings. Check RCA cables for damage. |
| Amplifier Overheating | Inadequate ventilation, impedance too low, prolonged high-power operation. | Pastikeun aliran hawa anu leres di sakitarna amplifier. Pariksa cocogna impedansi spiker amplifier capabilities. Reduce volume or operating time. |
| Noise/Hissing | Ground loop, poor quality RCA cables, improper gain setting. | Ensure a solid ground connection. Use shielded RCA cables. Adjust gain. |
If the problem persists after attempting these solutions, contact Arc Audio customer support or a qualified service technician.
8. Spésifikasi
The following are the technical specifications for the Arc Audio FD2200 amppanguat:
- Daya Kaluaran (RMS):
- 100 Watts x 2 @ 4 ohms
- 185 Watts x 2 @ 2 ohms
- 360 Watts x 1 @ 4 ohms (bridged)
- Transient Distortion: <0.1% @ 4 ohms
- Tanggapan Frékuénsi: 20Hz - 20KHz
- Signal-to-Noise Ratio (A-weighted): > 98dB
- Nguatkeun Bass: +18dB @ 45Hz
- Sensitipitas Input: 250mV - 2.5V
- Kawin silang: 55Hz - 5.5KHz variable 12dB
- Sekering: 45A x 1
- Dimensions (with endcaps): 10 3/8" x 16 3/4" x 2 3/8"
- Dimensions (without endcaps): 10 3/8" x 13 1/2" x 2 3/8"
- Beurat barang: 12 pon
- Voltage: 12 Volt (DC)
9. Garansi jeung Rojongan
Arc Audio products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Arc Audio website. For technical support or service inquiries, please contact Arc Audio customer service directly.
Inpormasi kontak:
- Websitus: www.arcaudio.com (Kelample link, link sabenerna bisa rupa-rupa)
- Palayanan palanggan: Rujuk kana website for current contact methods.
