STANLEY FATMAX 1-95-152 Aluminium Torch User Manual

Bubuka

This manual provides essential instructions for the safe and effective use, setup, and maintenance of your STANLEY FATMAX 1-95-152 Aluminium Torch. Please read this manual thoroughly before operating the device and retain it for future reference.

Émbaran Kasalametan

• Entong ningali langsung kana lampu LED.
• Jauhkeun tina jangkauan barudak.
• Ulah campur batré heubeul jeung anyar, atawa tipena béda accu.
• Remove batteries if the torch will not be used for an extended period.
• Buang batré nurutkeun peraturan lokal.
• Do not attempt to disassemble or modify the torch.

Eusi pakét

• STANLEY FATMAX Aluminium Torch
• Requires 3 x AAA Alkaline Batteries (not included)

Disetél

Pamasangan batré

1. Unscrew the tail cap of the torch by turning it counter-clockwise.
2. Insert three (3) AAA alkaline batteries into the battery holder, ensuring correct polarity (+/-).
3. Place the battery holder with the installed batteries into the torch body.
4. Pasang deui tutup buntutna searah jarum jam nepi ka kenceng pageuh.

Parentah Operasi

Hurungkeun/Pareuman

Press the button located on the tail cap to turn the torch on. Press the button again to turn the torch off.

Nyaluyukeun Beam

The head of the torch can be rotated to adjust the focus of the light beam. Rotate the head clockwise or counter-clockwise to achieve a wider floodlight or a more focused spotlight.

Pangropéa

beberesih

Wipe the torch body with a soft, damp lawon. Entong nganggo pembersih atanapi pangleyur anu abrasif. Pastikeun lénsa bersih pikeun kaluaran cahaya anu optimal.

Ngagantian batré

When the light output diminishes, replace the AAA batteries following the installation steps in the "Setup" section. Always replace all three batteries at the same time with new, fresh alkaline batteries.

Panyimpenan

Store the torch in a cool, dry place. If storing for an extended period, remove the batteries to prevent leakage and potential damage to the torch.

Pamérésan masalah

• Torch does not turn on:
  • Pariksa naha batréna dipasang kalayan leres sareng polaritas anu leres.
  • Ensure batteries are fresh and not depleted.
  • Verify the tail cap is securely tightened.
• Cahya taram atawa kedip-kedip:
  • Ganti batré ku nu anyar.
  • Clean battery contacts and terminals.
  • Pastikeun lénsa beresih.
• Beam adjustment is stiff:
  • Gently clean any debris from the head mechanism.
  • Avoid forcing the adjustment.

spésifikasi

Garansi sareng Rojongan

For warranty information or technical support, please refer to the official STANLEY FATMAX websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Simpen resi pameseran anjeun salaku bukti pameseran.