1. Bubuka
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your VisionTek ATI Radeon X1300 256MB DDR2 PCI Express Low Profile Video Card. Please read this manual thoroughly before installing or using the product to ensure proper functionality and to prevent damage.
2. Produk Langkungview
The VisionTek ATI Radeon X1300 is a low-profile PCI Express video card designed to enhance your computer's graphics capabilities. It features 256MB of DDR2 memory and a DMS-59 connector for dual display output. This card is suitable for systems requiring a compact graphics solution.
Figure 1: VisionTek ATI Radeon X1300 Low Profile Video Card. This image shows the compact design of the video card, highlighting its fan, heatsink, and DMS-59 connector. A ruler is visible at the bottom for scale.
3. Setup jeung Instalasi
3.1 Sateuacan Anjeun Ngawitan
- Kasaluyuan: Ensure your computer has an available PCI Express x16 slot and a power supply capable of supporting the video card.
- Kasalametan munggaran: Always unplug your computer from the power outlet before opening the case.
- Listrik statik: Ground yourself by touching a metal part of your computer chassis before handling components to prevent electrostatic discharge (ESD) damage.
- Pakakas: Anjeun bisa jadi kudu obeng sirah Phillips.
3.2 Pamasangan parangkat keras
- Buka Kasus Komputer: Cabut panel sisi casing komputer anjeun.
- Manggihan slot PCI Express: Identipikasi hiji slot PCI Express x16 sadia on motherboard Anjeun.
- Cabut panutup slot: Remove the metal slot cover corresponding to the chosen PCI Express slot from the back of your computer case.
- Insert Video Card: Carefully align the video card with the PCI Express slot and press down firmly until it is securely seated. Ensure the retention clip (if present) locks into place.
- Kartu Aman: Use a screw to secure the video card's bracket to the computer case.
- Tutup Kasus: Replace the computer's side panel and reconnect all cables.
3.3 Pamasangan Supir
- Daya Hurung: Connect your monitor to the DMS-59 port on the video card using the appropriate adapter (if required) and power on your computer.
- Operating System Boot: Your operating system may automatically detect the new hardware and install generic drivers.
- Install Latest Drivers: For optimal performance, download the latest drivers for the ATI Radeon X1300 from the official VisionTek website or AMD's legacy driver support page. Follow the on-screen instructions to complete the driver installation.
- Uihan deui: Balikan deui komputer saatos pamasangan supir réngsé.
4. Operating Your Video Card
4.1 Konfigurasi tampilan
After driver installation, you can configure your display settings through your operating system's display control panel or the ATI Catalyst Control Center (if installed with the drivers).
- Resolusi: Adjust the screen resolution to match your monitor's native resolution for the best visual quality.
- Sababaraha Pintonan: The DMS-59 connector supports dual displays. Use the provided DMS-59 splitter cable (if included) to connect two monitors. Configure display modes (extended desktop, duplicate, etc.) in your display settings.
- Laju Refresh: Set the refresh rate to the highest stable value supported by your monitor.
5. Pangropéa
Proper maintenance can extend the lifespan of your video card and ensure optimal performance.
- Ngaleungitkeun lebu: Periodically clean dust from the video card's heatsink and fan using compressed air. Ensure the computer is powered off and unplugged before cleaning.
- Pembaruan supir: Keep your graphics drivers updated. Check the VisionTek or AMD websitus sacara rutin pikeun rilis driver anyar.
- Ventilasi: Pastikeun wadah komputer anjeun gaduh aliran hawa anu cekap pikeun nyegah panas teuing.
6. Cara ngungkulan
If you encounter issues with your VisionTek ATI Radeon X1300 video card, refer to the following common problems and solutions.
- Henteu aya kaluaran tampilan:
- Ensure the video card is fully seated in the PCI Express slot.
- Verify the monitor cable is securely connected to both the video card and the monitor.
- Pariksa lamun monitor dihurungkeun tur disetel ka sumber input bener.
- Try connecting the monitor to the motherboard's integrated graphics (if available) to rule out other system issues.
- Masalah Instalasi Supir:
- Uninstall any previous graphics drivers before installing new ones.
- Download drivers directly from the official VisionTek or AMD websitus.
- Pastikeun sistem operasi anjeun up to date.
- Poor Performance or Artifacts:
- Pastikeun supir parantos dipasang kalayan leres sareng mutahir.
- Check for overheating. Clean dust from the fan and heatsink.
- Verify your power supply is sufficient for all system components.
- Instabilitas Sistem / Kacilakaan:
- Apdet BIOS motherboard anjeun ka vérsi panganyarna.
- Jalankeun alat diagnostik mémori pikeun mariksa masalah RAM.
- Ensure the video card is receiving adequate power.
7. Spésifikasi
| Fitur | Rincian |
|---|---|
| Grafik Coprocessor | ATI Radeon X1300 |
| Ukuran Mémori Grafika | 256 MB |
| Graphics Memory Type | DDR2 SDRAM |
| Panganteur | PCI Express |
| Faktor Bentuk | Pro lowfile |
| Konektor Kaluaran | DMS-59 |
| Dimensi produk | 10.7 x 8.3 x 2.8 inci |
| Item Beurat | 1 pon |
| Nomer modél | VTX1300DMSPCIE |
| Produsén | VISIONTEK MASS STORAGE |
| Tanggal Kahiji Sadia | 1 Maret 2011 |
8. Pangrojong sareng Jaminan
For technical support, driver downloads, or warranty information, please visit the official VisionTek websitus atanapi ngahubungan layanan palanggan maranéhna.
Anjeun tiasa mendakan langkung seueur inpormasi sareng sumber dukungan ku nganjang ka VisionTek Store on Amazon.
Note: Warranty terms and conditions may vary. Please refer to the documentation included with your product or the manufacturer's websitus pikeun detil jaminan husus.
