Intermatic MIL72ESTUZH-120 24-Hour 120V Flush Mount Electromechanical Time Control Instruction Manual

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of the Intermatic MIL72ESTUZH-120 24-Hour 120V Flush Mount Electromechanical Time Control. Please read this manual thoroughly before attempting to install or operate the device to ensure safe and correct usage.

2. Émbaran Kasalametan

PERHATOSAN: Résiko Setrum Listrik. Pegatkeun sambungan kakuatan dina circuit breaker atawa kotak sekering saméméh instalasi atawa ngalayanan.

• Sadaya kabel kedah saluyu sareng kode listrik lokal sareng nasional.
• Pamasangan kedah dilakukeun ku tukang listrik anu mumpuni.
• Do not exceed the maximum electrical ratings of the device.
• Pastikeun grounding anu leres pikeun nyegah bahaya listrik.
• Keep children away from electrical devices.

3. Produk Langkungview

The Intermatic MIL72ESTUZH-120 is a robust 24-hour electromechanical timer module designed for flush or panel mounting within a control panel. It is suitable for light-duty commercial applications requiring precise time control for 120 VAC single-phase circuits. Common uses include lighting, HVACR systems, pumps, motors, and general electrical circuit management.

Gambar: Hareupeun view of the Intermatic MIL72ESTUZH-120 timer. The device features a clear protective cover over a black dial. The dial displays a 24-hour format with AM/PM indicators and minute markings. A central clock mechanism with hour and minute hands indicates the current time. The outer edge of the dial contains captive trippers for setting ON/OFF periods. A manual override switch is visible on the right side of the dial.

Fitur konci:

• 21 A SPDT Switch: Provides reliable switching for various loads.
• Synchronous Drive with Self-Recharging Battery Backup: Ensures accurate timekeeping and operation during power outages.
• Captive Trippers: Allows for easy setting of 15-minute ON/OFF intervals.
• Manual Override: Provides flexibility to temporarily bypass programmed settings.
• Desain siram Gunung: Integrates seamlessly into control panels.

4. Spésifikasi

5. Pamasangan

Sateuacan Anjeun Ngawitan:

• Pastikeun daya dina pemutus sirkuit utama PAREUM.
• Pariksa yén suplai voltage matches the timer's rating (120V AC).
• Have appropriate tools ready (screwdriver, wire strippers, etc.).

Pamasangan:

1. Select a suitable location within a control panel for flush mounting.
2. Cut an appropriate opening in the panel according to the timer's dimensions.
3. Insert the timer into the opening and secure it using the provided mounting hardware.

Wiring:

Tingali diagram kabel anu disayogikeun sareng bungkus produk pikeun sambungan khusus. Léngkah-léngkah kabel umum kalebet:

1. Connect the incoming 120V AC line wire to the designated terminal.
2. Sambungkeun kawat nétral ka terminal nétral.
3. Connect the load wire(s) (e.g., to lights, motor) to the appropriate switched terminals (normally open or normally closed, depending on desired operation).
4. Pastikeun sadaya sambungan aman sareng insulated.

After wiring, restore power and proceed to initial setup.

6. Operasi

Nyetél Waktos Ayeuna:

1. Rotate the entire dial clockwise until the current time aligns with the time indicator arrow (usually a small triangle or line on the stationary part of the timer housing).
2. Ensure you distinguish between AM and PM hours on the 24-hour dial.

Setting ON/OFF Programs:

The timer uses captive trippers around the dial to set program times. Each tripper represents a 15-minute interval.

1. To set an ON period, push the trippers outwards for the desired duration.
2. To set an OFF period, leave the trippers in their inward position for the desired duration.
3. The timer will activate the connected load when the dial rotates past an outward-pushed tripper and deactivate it when it rotates past an inward-pushed tripper.

Manual Override:

The MIL72ESTUZH-120 features a manual override switch, typically a small lever or button, located on the timer face. This allows you to temporarily switch the load ON or OFF, overriding the programmed schedule without affecting future cycles.

• Move the override switch to the desired position (ON or OFF).
• The timer will resume its programmed schedule at the next scheduled ON or OFF event.

7. Pangropéa

The Intermatic MIL72ESTUZH-120 is designed for minimal maintenance.

• beberesih: Periodically wipe the exterior of the timer with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Batré: The unit contains a non-replaceable, self-recharging Nickel Metal Hydride battery for power outage carry-over. No user maintenance is required for the battery.
• Pamariksaan: Annually inspect the timer for any signs of damage, loose connections, or unusual operation. If any issues are found, disconnect power and consult a qualified electrician.

8. Cara ngungkulan

9. Garansi jeung Rojongan

For warranty information and technical support, please refer to the documentation included with your product or visit the official Intermatic websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.

Intermatic Customer Support:

• Websitus: www.intermatic.com
• Contact information can typically be found in the 'Support' or 'Contact Us' section of their websitus.