Vollrath 38003

Manual Instruksi Méja Kadaharan Panas Vollrath ServeWell 3-Well Modél 38003

Modél: 38003

1. Bubuka

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Vollrath ServeWell 3-Well Hot Food Table, Model 38003. This unit is designed for commercial food holding applications, ensuring food is kept at optimal serving temperatures. Please read this manual thoroughly before operating the equipment.

Vollrath ServeWell 3-Well Hot Food Table, Model 38003, made of stainless steel with three black food wells and control knobs on the front panel.

Figure 1: Vollrath ServeWell 3-Well Hot Food Table, Model 38003. This image displays the stainless steel construction, three food wells, and the control panel with individual thermostat knobs.

2. Parentah Kasalametan

3. Setup jeung Instalasi

  1. Ngabongkar bungkusan: Carefully remove the unit from its packaging. Inspect for any shipping damage. Report any damage to the carrier immediately.
  2. panempatan: Position the hot food table on a stable, level, non-combustible surface. Ensure there is sufficient clearance around the unit for air circulation and safe operation.
  3. Sambungan listrik: Connect the unit to a dedicated electrical outlet that matches the voltage jeung amperage requirements (1440 Watts total, 480 Watts per well). Ensure the circuit is properly grounded.
  4. Bersihan awal: Before first use, clean all surfaces that will come into contact with food. Refer to the "Maintenance" section for cleaning instructions.
  5. eusian cai: Fill each well with approximately 1 inch of clean water. Do not overfill.

4. Parentah Operasi

The ServeWell Hot Food Table is designed to hold pre-heated food at safe serving temperatures. It is not intended for cooking raw food or reheating cold food.

  1. Daya Hurung: Ensure the unit is plugged in. Turn the main power switch (if present) to the ON position.
  2. Fill Wells: Ensure each well contains approximately 1 inch of water.
  3. Preheat: Turn the individual thermostat control knobs for each well to the desired temperature setting. Allow the unit to preheat for at least 20-30 minutes before placing food pans.
  4. Muatan Dahareun: Place pre-heated food in appropriate food pans (up to 4 inches deep, full size or fractional) into the wells.
  5. Kontrol Suhu: The automatic thermostat controls will maintain the set temperature. Monitor food temperatures regularly using a food thermometer to ensure compliance with food safety standards.
  6. Solokan: After use, allow the unit to cool. Use the brass drain valves located under each well to safely drain water.
  7. Pareum listrik: Turn all thermostat control knobs to the OFF position and disconnect the unit from the power supply when not in use.

5. Pangropéa jeung beberesih

Regular cleaning and maintenance will extend the life of your hot food table and ensure sanitary operation.

6. Cara ngungkulan

MasalahMungkin Cukang lantarananaSolusi
Unit teu panasTeu aya daya; termostat disetel teuing handap; élémen pemanas rusak.Check power connection and circuit breaker; increase thermostat setting; contact service technician.
Food not holding temperatureInsufficient water in wells; thermostat set too low; food not pre-heated; pans not covered.Ensure wells have adequate water; increase thermostat setting; always use pre-heated food; cover food pans.
Water leaks from wellDrain valve not fully closed; damaged well.Ensure drain valve is securely closed; contact service technician for well inspection.

7. Spésifikasi

8. Émbaran jaminan

The manufacturer's warranty for this product does not apply to units purchased for personal, family, or household use. This warranty is specifically for commercial applications. For detailed warranty terms and conditions, please refer to the documentation provided with your purchase or contact Vollrath customer support.

9. Rojongan Palanggan

For technical assistance, parts, or service inquiries regarding your Vollrath ServeWell Hot Food Table, please contact Vollrath customer support. Ensure you have your model number (38003) and serial number available when contacting support.

You can find contact information on the official Vollrath websitus atawa ngaliwatan dealer otorisasi Anjeun.