1. Bubuka
The Elation Professional SDC-6 v2 is a compact and versatile 6-channel DMX controller designed for easy operation of DMX-compatible lighting fixtures. It features six individual channel faders and one master fader, providing intuitive control over various lighting effects. This manual provides essential information for the safe and efficient use of your SDC-6 v2 controller, including setup, operation, maintenance, and troubleshooting.
2. Parentah Kasalametan
Please read these safety instructions carefully before operating the device. Failure to comply may result in damage to the unit, property, or personal injury.
- Salawasna sambungkeun alat ka colokan listrik grounded.
- Ensure the power adapter's voltage cocog catu daya lokal.
- Ulah ngantepkeun unit ieu ka hujan, kalembaban, atanapi kalembaban anu kaleuleuwihi.
- Hindarkeun nempatkeun unit caket sumber panas atanapi dina sinar panonpoé langsung.
- Ulah ngoperasikeun unit upami kabel listrikna ruksak.
- Rujukkeun sadaya layanan ka petugas layanan anu mumpuni. Teu aya bagian anu tiasa diservis ku pangguna di jerona.
- Pegatkeun sambungan kakuatan saméméh meresihan atawa ngalakukeun sagala pangropéa.
3. Eusi Paket
Pastikeun yén sadaya barang anu didaptarkeun di handap aya sareng dina kaayaan anu saé nalika muka bungkusan:
- Elation Professional SDC-6 v2 DMX Controller
- 9V Daya adaptor
- Manual pangguna (dokumén ieu)
4. Setélan
Follow these steps to set up your SDC-6 v2 DMX controller:
- panempatan: Place the controller on a stable, flat surface away from excessive heat, moisture, or dust.
- Sambungan DMX: Connect the 3-pin DMX output connector of the SDC-6 v2 to the DMX input of your first DMX-compatible lighting fixture. If you have multiple fixtures, daisy-chain them by connecting the DMX output of the first fixture to the DMX input of the second, and so on.
- Sambungan Daya: Insert the 9V power adapter into the power input jack on the controller. Plug the power adapter into a suitable electrical outlet. The power indicator LED on the controller should illuminate.
Gambar 4.1: Top view of the Elation SDC-6 v2 DMX Controller, showing the six channel faders, master fader, and power indicator.
Gambar 4.2: Sisi view of the Elation SDC-6 v2 DMX Controller, illustrating the battery compartment for optional portable power (battery not included for primary operation).
5. Parentah Operasi
The SDC-6 v2 provides straightforward control over your DMX lighting fixtures.
5.1. Channel Faders (1-6)
Each of the six numbered faders (1 through 6) corresponds to a DMX channel. Moving a fader up increases the DMX value for that channel (from 0 to 255), while moving it down decreases the value. The specific function of each channel (e.g., dimmer, color, strobe) depends on the DMX address and mode settings of your connected lighting fixture.
5.2. Master Fader
The Master fader controls the overall output level of all active DMX channels. Moving the Master fader down will dim or turn off all lights controlled by the individual channel faders, regardless of their individual settings. Moving it up will restore the output to the levels set by the individual channel faders.
5.3. Indikator kakuatan
The Power indicator LED illuminates when the unit is receiving power, indicating it is ready for operation.
6. Pangropéa
Proper maintenance ensures the longevity and reliable operation of your SDC-6 v2 controller.
- beberesih: Use a soft, dry cloth to wipe the exterior of the unit. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Panyimpenan: When not in use for extended periods, store the controller in a cool, dry place, protected from dust and extreme temperatures.
- kakuatan: Always disconnect the power adapter when the unit is not in use or before cleaning.
7. Cara ngungkulan
If you encounter issues with your SDC-6 v2 controller, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya lampu indikator kakuatan | Adaptor daya teu nyambung atanapi rusak; stop kontak teu aktip. | Ensure power adapter is securely connected to the unit and a working outlet. Test the outlet with another device. |
| Lights not responding to faders | Incorrect DMX connection; Master fader is down; DMX address mismatch on fixtures; fixture not in DMX mode. | Check DMX cable connections. Ensure Master fader is up. Verify DMX addresses on fixtures match the channels being controlled. Confirm fixtures are set to DMX mode. |
| Intermittent control | Loose DMX cable connection; DMX signal interference. | Secure all DMX cable connections. Use high-quality DMX cables. Avoid running DMX cables parallel to power cables. |
8. Spésifikasi
| Modél | SDC6 |
| merek | Elation Professional (ADJ) |
| Saluran | 6 DMX Channels + 1 Master Fader |
| Panyambung DMX | 3-pin XLR DMX Output |
| Sasayogian tanaga | 9V DC (ngalangkungan adaptor daya anu kalebet) |
| Ukuran (L x W x H) | 173 mm x 153 mm x 55 mm (6.81 inci x 6.02 inci x 2.17 inci) |
| Beurat | 1 kg (2.2 lbs) |
| Warna | Hideung |
| Negara asal | Cina |
9. Garansi jeung Rojongan
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Elation Professional websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.
For further assistance, you may contact the seller or manufacturer directly. Contact details are typically available on their respective websites or on your purchase invoice.
