Bubuka
Welcome to the instruction manual for your Beta 1439/K7 Angular Screwdriver Set. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your tool. Please read this manual thoroughly before first use and retain it for future reference.
Émbaran Kasalametan
- Always wear appropriate personal protective equipment (PPE), such as safety glasses, when operating hand tools.
- Ensure the correct blade is securely inserted before applying torque.
- Do not use the tool for purposes other than its intended use (tightening and loosening fasteners in hard-to-reach areas).
- Jaga alat beresih sareng bébas tina minyak atanapi gajih pikeun ngajaga cengkraman anu aman.
- Store the tool and blades in the provided case to prevent damage and loss.
- Jauhkeun tina jangkauan barudak.
Eusi pakét
Your Beta 1439/K7 Angular Screwdriver Set includes the following components:
- 1 x Angular Screwdriver Handle (Long Series)
- 1 x Angular Head Attachment
- 1 x Standard Screwdriver Handle
- Multiple Screwdriver Blades (various types and sizes)
- 1 x Plastic Storage Case
Image: The complete Beta 1439/K7 Angular Screwdriver Set, including the long series handle, angular attachment, standard handle, various blades, and the protective plastic storage case.
Disetél
- Ngabongkar bungkusan: Carefully remove all components from the plastic storage case. Inspect for any signs of damage.
- Attaching the Angular Head:
- Identify the long series screwdriver handle.
- Align the angular head attachment with the end of the long series handle.
- Push and twist until the angular head is securely seated.
Gambar: A close-up view of the angular head attachment, showing the bit receiver. This head allows for access to fasteners at a 90-degree angle.
- Inserting a Blade:
- Select the appropriate screwdriver blade for your fastener.
- Insert the blade firmly into the receiver on the angular head or the standard screwdriver handle. Ensure it clicks into place or is held securely.
Parentah Operasi
- Selecting the Correct Blade: Always match the blade type (e.g., Phillips, slotted) and size to the fastener head to prevent damage to both the fastener and the blade.
- Applying Torque with Angular Head:
- Position the angular head with the inserted blade onto the fastener.
- Hold the long series handle firmly.
- Rotate the handle to tighten or loosen the fastener. The 90-degree angle allows access in confined spaces.
- Using the Standard Handle: For fasteners in easily accessible areas, insert the chosen blade directly into the standard screwdriver handle and operate as a conventional screwdriver.
- Awas: Do not over-tighten fasteners, as this can strip threads or damage the material.
Pangropéa
- beberesih: After each use, wipe down the screwdriver handle, angular head, and blades with a clean, dry cloth. Remove any dirt, dust, or debris.
- Lubrication: The angular head mechanism is designed for smooth operation. Avoid applying excessive lubricants unless specifically recommended by Beta, as this can attract dirt.
- Panyimpenan: Always store the screwdriver set in its original plastic case. This protects the components from environmental damage and keeps them organized.
- Pamariksaan: Periodically inspect blades for wear, bending, or damage. Replace worn or damaged blades to ensure optimal performance and safety.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Blade slips from fastener | Incorrect blade size/type; Worn blade; Fastener head stripped | Use correct blade; Replace worn blade; Replace fastener |
| Angular head feels stiff | Dirt/debris in mechanism; Lack of lubrication | Clean angular head thoroughly; Consult Beta support if stiffness persists |
| Blade does not stay in handle | Blade not fully inserted; Damaged retention mechanism | Ensure blade is fully inserted; Contact Beta support for repair/replacement |
If you encounter issues not listed here, please contact Beta customer support.
spésifikasi
- merek: Béta
- model: 1439/K7
- Internal Model Number: 14390101
- Ukuran produk: 3.94 x 3.94 x 3.94 inches (packaged); 2.24 Pounds (weight)
- Bahan: Plastic (case, handles); Metal (blades, angular head)
- Gaya sirah: Various (e.g., Phillips, Slotted)
- Dianjurkeun pamakéan: Tightening and loosening hard-to-reach fasteners
- eusi: Angular screwdriver, blades, and case
Garansi sareng Rojongan
Beta products are manufactured to high standards and are designed for durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official Beta websitus.
For technical support, replacement parts, or warranty claims, please contact Beta customer service.
Pabrikan: BETA UTENSILI S.P.A.
Titimangsa munggaran sadia: 29 Maret 2010
