HELLA 2-Pole Cable Connector (8KW 744 806-801) Instruction Manual

1. Produk Langkungview

This manual provides essential information for the proper installation, operation, and maintenance of your HELLA 2-Pole Cable Connector, model 8KW 744 806-801. This connector is designed for reliable electrical connections in demanding environments, offering maximum protection against water and dust ingress with an IP 67 rating.

HELLA 2-Pole Cable Connector, showing male and female parts

Figure 1: HELLA 2-Pole Cable Connector (Male and Female components)

Fitur konci:

Kualitas Equipment Asli
Reliable electrical connection
Maximum protection against external influences (IP 67 rated)
High resistance to vibrations and corrosion
Based on traditional crimp contact concept (SUPERSEAL system)

2. Setup jeung Instalasi

Proper installation is crucial for the performance and longevity of the HELLA SUPERSEAL connector. Ensure all components are clean and free from damage before assembly.

Alat anu diperyogikeun:

Crimping tool suitable for SUPERSEAL terminals
Striper kawat
Unlocking tool (if disassembly is required)

Léngkah-léngkah pamasangan:

Siapkeun Kawat: Strip approximately 3-4 mm of insulation from the wire ends. Ensure the wire cross-section is suitable for the connector (up to 2.5 mm²).
Crimp Terminals: Insert the stripped wire into the appropriate SUPERSEAL terminal (male or female). Use a specialized crimping tool to securely crimp the terminal onto the wire. Ensure both the conductor and insulation are properly crimped.
Insert Seals: Slide the rubber seals onto the crimped wires. These seals are critical for achieving the IP 67 rating.
Insert Terminals into Housing: Carefully push the crimped terminals (with seals) into the correct cavities of the connector housing until they click into place. Ensure the terminals are fully seated and locked.
Connect Halves: Align the male and female connector halves and push them together firmly until they lock. A distinct click indicates a secure connection.

Note: Refer to the specific crimping tool instructions for detailed crimping procedures. Incorrect crimping can lead to poor electrical contact and compromise the waterproof seal.

3. Parentah Operasi

Once installed, the HELLA 2-Pole Cable Connector operates as a reliable electrical junction. No specific operational steps are required beyond ensuring a secure connection.

Ensure the connector is fully engaged and locked to maintain its IP 67 protection against water and dust.
Avoid applying excessive force or strain to the connected cables.
Do not attempt to disconnect the connector by pulling on the wires; always grasp the connector housing.

4. Pangropéa

The HELLA SUPERSEAL connector is designed for minimal maintenance due to its robust construction and sealing properties.

Inspeksi périodik: Periodically inspect the connector for any signs of physical damage, cracks, or degradation of the rubber seals.
beberesih: Upami diperyogikeun, bersihan bagian luar konektor nganggo adamp cloth. Avoid using harsh chemicals or solvents that could damage the plastic or rubber components.
Integritas segel: Ensure the seals are properly seated and not displaced, especially after any handling or exposure to extreme conditions.

5. Cara ngungkulan

This section addresses common issues that may arise with the HELLA 2-Pole Cable Connector.

Masalah	Mungkin Cukang lantaranana	Solusi
Teu aya sambungan listrik	Improperly crimped terminals Terminals not fully seated in housing Damaged wire or terminal Connector not fully engaged	Re-crimp terminals ensuring proper technique. Verify terminals are clicked into place. Inspect wires and terminals for damage; replace if necessary. Ensure male and female halves are securely locked.
Water or dust ingress	Seals improperly installed or damaged Connector not fully engaged Parumahan ruksak	Inspect and re-seat or replace seals. Ensure connector halves are securely locked. Inspect housing for cracks; replace connector if damaged.
Kasesahan nyambungkeun / megatkeun	Kasalahan Uing dina panyambungna Mekanisme ngonci ruksak	Ensure proper alignment before pushing. Clean connector cavities. Inspect locking tabs; replace connector if damaged.

6. Spésifikasi

merek	Hella
Nomer modél	8KW 744 806-801 (Manufacturer Model: 744806801)
Tipe	2-Pole Cable Connector (Male/Female)
Max. Wire Cross-section	2.5 mm²
Protéksi Ingress (IP) Peunteun	IP 67 (Dust tight and protected against immersion in water up to 1 meter for 30 minutes)
minuhan	IEC 529, DIN ISO 40050
Item Beurat	15 g
Ukuran produk (L x W x H)	5.5 x 3.3 x 9 cm
Negara asal	Jérman

7. Émbaran jaminan

Specific warranty details for this product are not provided in the available information. Please refer to the official HELLA website or contact HELLA customer support for warranty terms and conditions.

8. Rojongan jeung Kontak

For technical assistance, product inquiries, or further support, please visit the official HELLA websitus atanapi ngahubungan departemén layanan palanggan maranéhna.

Resmi Websitus: www.hella.com
Palayanan palanggan: Refer to the contact section on the HELLA websitus pikeun pilihan dukungan régional.

	Katalog Aftermarket HELLA Australia 2019-2020 Jelajahi Katalog Aftermarket HELLA Australia komprehensif pikeun 2019-2020, nampilkeun rupa-rupa spidol LED sareng sinyal lamps, solusi cahaya, jeung komponén listrik otomotif pikeun kandaraan komérsial. Panggihan téknologi inovatif sapertos DuraLED sareng EuroLED, dirancang pikeun daya tahan, kinerja, sareng kaamanan.
	HELLA ELECTRICS 2013-14 Katalog: Relay, Saklar, sareng seueur deui Explore the HELLA ELECTRICS 2013-14 catalogue, featuring a comprehensive range of automotive relays, switches, flasher units, control units, and headlight levelling actuators. Find detailed product information and vehicle applications for professional use.
	Katalog Wiper Wiper HELLA: Rentang Komprehensif & Aplikasi Kandaraan Jelajahi katalog wiper wiper HELLA, nampilkeun pilihan Wiper Metal, Cleantech, Easy Set, Rear, Hybrid, Winter, sareng Heavy Duty. Milarian spésifikasi lengkep, pituduh adaptor, sareng daptar aplikasi kendaraan pikeun pisibilitas sareng kaamanan anu optimal.
	Lampu Kendaraan HELLA: Katalog Bohlam sareng Panduan Téknis Panggihan rupa-rupa bohlam kendaraan kualitas luhur HELLA, kalebet pilihan halogen, Xenon, sareng LED. Katalog lengkep ieu ngajelaskeun spésifikasi produk, aplikasi, sareng standar uji coba pikeun solusi lampu otomotif.
	Alat Idéntifikasi Radio HELLA FS1271M: Fitur sareng Aplikasi Diajar ngeunaan HELLA FS1271M, alat idéntifikasi radio pikeun éntri pasip otomotif sareng sistem ngamimitian pasip. Dokumén ieu ngécéskeun fungsina, aplikasi, sareng patuh pangaturan.
	HELLA Mounting Instructions for BMW E39 (09/00 onwards) Step-by-step installation guide for HELLA parts on BMW E39 models from September 2000 onwards, detailing component placement, electrical connections, and fastener securing.

HELLA 8KW 744 806-801