SATCO S8667 40W T5 Twin Tube CFL Lamp Manual pamaké

1. Bubuka

This manual provides essential information for the safe installation, operation, and maintenance of your SATCO S8667 40W T5 Twin Tube Compact Fluorescent LampMangga baca parentah ieu kalawan saksama sateuacan dianggo sareng simpen kanggo rujukan ka hareup.

Émbaran Kasalametan

• Always disconnect power before installing or replacing the lamp.
• Ulah make l ieuamp in enclosed fixtures unless specified by the fixture manufacturer.
• Handle with care to avoid breakage. This lamp contains mercury; dispose of properly according to local regulations.
• Ensure the lighting fixture is compatible with a 2G11 base and a 40W fluorescent lamp.

2. Produk Langkungview

The SATCO S8667 is a 40-watt Twin Tube Compact Fluorescent Lamp (CFL) designed for general lighting applications. It features a 2G11 lamp base and a T5 shape, providing 3500 lumens of neutral white light at a 3500K color temperature.

Fitur konci:

• Wattage: 40W
• Voltage: 120V
• Tipe Dasar: 2G11
• Wangun: T5 Twin Tube
• Lumen Kaluaran: 3500 Lumén
• Suhu warna: 3500K (Bodas Netral)
• Kahirupan Rata-rata: 20,000 jam

Figure 1: SATCO S8667 Twin Tube Compact Fluorescent LampGambar ieu ngagambarkeun lamp's twin tube design and 2G11 base connector.

3. Setup jeung Instalasi

1. Pegatkeun daya: Before beginning installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
2. Kasaluyuan fixture: Verify that your lighting fixture is designed for 2G11 base fluorescent lamps and can accommodate a 40W lamp.
3. Lamp Lebetkeun: Carefully align the four pins of the 2G11 base on the SATCO S8667 lamp with the corresponding slots in the fixture's lamp panyekel. Gently nyorong lamp kana wadahna dugi ka pageuh dipasang. Tong maksakeun lamp, sabab ieu bisa ngabalukarkeun karuksakan.
4. Sambungan deui kakuatan: Sakali dina lamp is securely installed, restore power to the fixture from the circuit breaker or fuse box.
5. Uji coba: Turn on the light switch to confirm proper operation of the lamp.

Catetan: Lamun ngaganti hiji l ayaamp, ngidinan l heubeulamp to cool completely before removal. Grasp the old lamp firmly and pull it straight out from the base to avoid bending the pins.

4. Parentah Operasi

The SATCO S8667 lamp operates by simply applying power to the compatible fixture. Once installed, turn on the light switch to illuminate the lamp. Ieu lamp is designed for use with instant-start or rapid-start electronic ballasts. Refer to your fixture's specifications for ballast type compatibility.

The SATCO S8667 is a dimmable lamp. If your fixture and ballast are compatible with dimming functionality, the lamp's brightness can be adjusted using a suitable dimmer switch. Ensure the dimmer is specifically rated for fluorescent lamps to prevent damage or improper operation.

5. Pangropéa

beberesih:

To maintain optimal light output, periodically clean the lamp surface. Ensure the power is off and the lamp is cool before cleaning. Use a soft, dry, lint-free cloth to gently wipe the lamp. Do not use liquid cleaners, abrasive materials, or harsh chemicals, as these can damage the lamp's permukaan atawa komponén internal.

Lamp ngagantian:

The average rated life of the SATCO S8667 lamp is 20,000 hours. When the lamp reaches the end of its operational life or fails, replace it by following the installation steps outlined in Section 3. Always ensure the power is disconnected before replacing the lamp.

pembuangan: Ieu lamp contains a small amount of mercury. Dispose of the lamp according to local, state, and federal regulations. Many communities have recycling programs specifically for fluorescent lamps to ensure environmentally responsible disposal.

6. Cara ngungkulan

• Lamp Teu hurung:
  • Check if the power supply to the fixture is on at the switch and circuit breaker.
  • Pastikeun lamp is correctly and securely seated in the fixture's base.
  • Verify that the fixture's ballast is functioning correctly and is compatible with a 40W CFL.
  • Ngaganti lamp with a known working one to rule out a defective lamp.
• Lamp Kedip-kedip:
  • Pastikeun lamp is fully inserted into the base.
  • Pariksa kabel anu kendor dina fixture-na.
  • The ballast may be failing or incompatible with the lamp.
  • If using a dimmer, ensure it is rated for fluorescent lamps and is functioning correctly.
• Kaluaran Cahaya Anu Dikirangan:
  • Ngabersihan lamp surface as described in the Maintenance section.
  • Anu lamp may be nearing the end of its operational life.
• Lamp Buzzes:
  • A persistent buzzing sound often indicates an issue with the ballast. Consult a qualified electrician for inspection and replacement if necessary.

7. Spésifikasi

8. Garansi jeung Rojongan

For specific warranty information and technical support regarding your SATCO S8667 lamp, please contact Satco customer service directly or visit their official websitus. Disarankeun pikeun nyimpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi naon waé.

Pabrikan: SATCO Lighting

Websitus: www.satco.com