Intermatic PE153 24-Hour Electronic Time Control User Manual

1. Bubuka jeung Leuwihview

The Intermatic PE153 is a 24-hour electronic time control designed for managing multi-circuit pool and spa equipment. This device features three independent circuits, enabling precise control over single-speed and two-speed pumps, as well as cleaner/booster pumps. It offers versatile programming options, including countdown and override functions, and incorporates essential freeze and heater protection to safeguard your pool or spa system.

The unit is housed in a durable metal enclosure and includes an LCD readout for easy monitoring and adjustment of settings. Its multivoltage input and output capabilities ensure compatibility with various electrical configurations.

2. Émbaran Kasalametan

PERHATOSAN: RÉSIKNA GUNUNG Éléktrik.

• Always turn off power at the main electrical panel before servicing this switch or any connected equipment.
• Use only 75°C copper conductors for wiring connections.
• Ensure the safety guard is properly reinstalled after completing any wiring or maintenance.
• This device must be installed by authorized personnel in accordance with all local and national electrical codes.
• Keep the enclosure door closed at all times to maintain its NEMA 3R rainproof rating.

3. Fitur Produk

• Multi-Circuit Control: Manages up to three independent circuits for various pool/spa equipment.
• Countdown and Override: Allows temporary program overrides with automatic resumption without reprogramming.
• Versatile Programming: Supports three ON/OFF events per circuit per day and seven preprogrammed modes.
• Perlindungan beku: Automatically activates equipment to prevent freezing in cold conditions.
• Heater Protection: Helps protect heating elements by managing operational cycles.
• Bacaan LCD: Provides clear digital display for monitoring and setting adjustments.
• Multivoltage Rojongan: Compatible with 120V AC and 240V AC electrical systems.
• Kandang Awét: Housed in a NEMA 3R rated metal enclosure for indoor/outdoor use.

4. Setup jeung Instalasi

Installation of the Intermatic PE153 should be performed by a qualified electrician. Ensure all local and national electrical codes are followed. The unit is designed for wall mounting.

Sambungan Wiring:

The PE153 features clearly labeled terminals for power input (120V or 240V) and three independent load circuits. Each circuit has terminals for LINE and LOAD connections. Refer to the internal wiring diagram and the safety instructions before making any connections.

• Connect the main power supply to the "TIMER POWER" terminals, ensuring correct voltage (120V atawa 240V).
• Connect the equipment to be controlled (e.g., pumps) to the respective "CIRCUIT 1," "CIRCUIT 2," and "CIRCUIT 3" LINE and LOAD terminals.
• Ensure all connections are secure and use appropriate wire gauges for the load.

5. Parentah Operasi

The PE153 features an intuitive control panel for programming and manual operation.

Kontrol Panel Langkungview:

• Tombol PROG: Cycles through various menu options for programming.
• Tombol ENTER: Saves changes and exits the current programming mode.
• Tombol panah luhur/handap: Used to navigate menus and adjust program settings (e.g., time, event type).
• ON/OFF Buttons (Circuit 1, 2, 3): Manually turn individual circuits ON or OFF.
• Bacaan LCD: Displays current time, program events, and settings.

Léngkah-léngkah Pemrograman:

1. Pencét éta PROG key to enter the programming menu. Continue pressing PROG to cycle through available options (e.g., Set Time, Set Date, Program Events).
2. Ngagunakeun éta Tombol panah luhur/handap to adjust values or select specific settings within a menu option.
3. Once a setting is adjusted, press the Asupkeun key to save the change and proceed.
4. To set ON/OFF events for each circuit, navigate to the "Program Events" section using the PROG konci.
5. Select the desired circuit (Load 1, Load 2, Load 3) and then define the ON and OFF times for up to three events per day.
6. After setting all desired programs, press Asupkeun pikeun nyimpen jeung kaluar mode programming.

Manual Override:

To manually turn a circuit ON or OFF, simply press the corresponding ON/OFF button for Circuit 1, Circuit 2, or Circuit 3. The timer will automatically resume its programmed schedule after the override period, or when the next programmed event occurs.

6. Pangropéa

The Intermatic PE153 is designed for minimal maintenance. Regular checks can help ensure optimal performance and longevity:

• Inspeksi Visual: Periodically inspect the enclosure for any signs of damage, corrosion, or moisture ingress. Ensure the door seal is intact.
• Pariksa Wiring: With power disconnected at the main panel, visually inspect all wiring connections for tightness and signs of wear or overheating.
• beberesih: Keep the LCD screen and control buttons clean and free of dust or debris using a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Kaamanan: Always ensure the internal safety guard is in place, especially after any wiring adjustments.

7. Cara ngungkulan

If the PE153 is not functioning as expected, consider the following basic troubleshooting steps:

• Henteu aya tampilan/kakuatan:
  • Check the main circuit breaker for the timer and connected equipment.
  • Verify that the power supply wiring to the "TIMER POWER" terminals is secure and correct.
  • The unit has a 36-hour backup time for settings during power outages; however, prolonged outages may require resetting the time.
• Equipment Not Turning ON/OFF:
  • Confirm that the program settings for the specific circuit are correct (ON/OFF times, days).
  • Check the manual ON/OFF button for the circuit to ensure it's not in an overridden state.
  • Inspect the wiring connections for the affected circuit (LINE and LOAD) to ensure they are secure.
  • Verify that the connected equipment is functioning correctly independently of the timer.
• Lepat Waktos/Tanggal:
  • Access the programming menu using the PROG button and adjust the time and date settings as needed.

For persistent issues or complex problems, it is recommended to contact Intermatic customer support or a qualified electrician.

8. Spésifikasi

9. Garansi jeung Rojongan

Inpormasi Garansi:

The Intermatic PE153 comes with a garansi 1 taun. This warranty covers replacement of the unit but does not include labor costs associated with removal or reinstallation.

Rojongan Palanggan:

For technical assistance, warranty claims, or further inquiries, please contact Intermatic customer support. Refer to the official Intermatic websitus atawa bungkusan produk pikeun inpo kontak panganyarna.