Stack-On GCB-8RTA-DS

Stack-On GCB-8RTA Steel 8-Gun Ready to Assemble Security Cabinet

Instruksi Manual

Produk Leuwihview

The Stack-On GCB-8RTA Steel 8-Gun Ready to Assemble Security Cabinet is designed to securely store up to 8 rifles or shotguns, accommodating firearms up to 52 inches tall. This cabinet features an easy-to-assemble design with integrated, form-fitting parts that are securely fastened together. The fasteners are tamper-proof from the exterior, enhancing security.

fitur konci ngawengku:

  • A 3-point locking system with a double-bitted, key-coded lock for enhanced security.
  • A removable steel shelf for additional storage flexibility.
  • Stack-On patented barrel rests to properly secure firearms.
  • California approved firearms safety device, meeting the requirements of California Penal Code section 12088.

Émbaran Kasalametan

penting: Always prioritize safety when handling firearms and operating this security cabinet. Do not attempt to tamper with the fasteners from the outside, as this can compromise the cabinet's security features. Ensure all firearms stored within the cabinet are unloaded and secured according to local regulations and best practices. Keep keys in a secure location, inaccessible to unauthorized individuals, especially children.

Setup sareng Majelis

The Stack-On GCB-8RTA cabinet is designed for easy assembly. All necessary parts are integrated and form-fitting, requiring minimal tools for construction. It is recommended to assemble the cabinet in its final desired location due to its weight and size once assembled.

All components of the Stack-On GCB-8RTA security cabinet laid out before assembly.
Figure 1: All components of the Stack-On GCB-8RTA security cabinet laid out, including side panels, top and bottom panels, door, removable shelf, barrel rests, and locking mechanism rod. This image shows the cabinet in its unassembled state, ready for construction.
A person assembling the Stack-On GCB-8RTA security cabinet, attaching a side panel.
Figure 2: A person is shown in the process of assembling the Stack-On GCB-8RTA security cabinet. They are kneeling and securing one of the side panels to the main frame, demonstrating the "ready to assemble" nature of the product.

Léngkah-léngkah Majelis (Umum):

  1. Buka bungkus sadaya komponén sareng pariksa kana daptar bagian (tingali Gambar 1).
  2. Attach the back panel to the base and top panels using the provided tampfasteners er-buktina.
  3. Secure the side panels to the assembled back, base, and top sections (refer to Figure 2).
  4. Install the door, ensuring the hinges align correctly and the locking mechanism operates smoothly.
  5. Insert the removable steel shelf at the desired height.
  6. Place the patented barrel rests at the bottom of the cabinet.
  7. Pastikeun yén sakabéh fasteners anu tightened aman.

For detailed, step-by-step instructions, please refer to the printed manual included with your product packaging.

Operasi

Operating your Stack-On security cabinet is straightforward, focusing on secure storage and easy access for authorized users.

Ngonci sareng muka konci:

  • The cabinet features a 3-point locking system operated by a double-bitted, key-coded lock.
  • To unlock, insert the key into the lock cylinder and turn it to disengage the locking bolts.
  • To lock, close the door firmly and turn the key to engage the locking bolts. Remove the key immediately after locking.
Close-up of the key and lock mechanism of the Stack-On security cabinet.
Gambar 3: A close-up view of the key inserted into the lock cylinder of the Stack-On security cabinet. This illustrates the key-coded locking mechanism that secures the cabinet's contents.

Storing Firearms:

  • Ensure all firearms are unloaded before placing them in the cabinet.
  • Utilize the patented barrel rests to keep firearms upright and organized.
  • The removable steel shelf can be used for storing ammunition, accessories, or smaller firearms.
Interior view of the Stack-On GCB-8RTA cabinet with firearms stored inside.
Figure 4: The interior of the Stack-On GCB-8RTA security cabinet, showing multiple rifles stored upright using the integrated barrel rests. A removable shelf is visible at the top, holding additional items, demonstrating the cabinet's storage capacity and organization.

Pangropéa

To ensure the longevity and continued security of your Stack-On cabinet, periodic maintenance is recommended:

  • beberesih: Ngusap permukaan luar sareng jero kalayan lemes, damp lawon. Hindarkeun pembersih abrasive anu tiasa ngaruksak bérés.
  • Mékanisme konci: Periodically check the lock for smooth operation. If it becomes stiff, a small amount of graphite lubricant can be applied to the keyhole. Do not use oil-based lubricants.
  • Pengikat: Although tamper-proof from the outside, occasionally check the internal fasteners to ensure they remain tight.
  • Lingkungan: Store the cabinet in a dry environment to prevent rust and corrosion.

Pamérésan masalah

If you encounter issues with your Stack-On GCB-8RTA security cabinet, consider the following common solutions:

  • Door Not Closing/Locking Properly:
    • Ensure the cabinet is on a level surface. Uneven flooring can cause the cabinet to twist slightly, affecting door alignment.
    • Check for any obstructions inside the cabinet that might be preventing the door from closing fully.
    • Verify that the locking bolts are not obstructed.
  • Key Sticking/Hard to Turn:
    • Apply a small amount of graphite powder (not oil) into the keyhole. Insert and remove the key several times to distribute the lubricant.
    • Ensure you are using the correct key.
  • Cabinet Wobbles After Assembly:
    • Double-check that all assembly fasteners are securely tightened.
    • Pastikeun kabinét disimpen dina permukaan anu datar sareng stabil.

If these steps do not resolve the issue, please contact Stack-On customer support for further assistance.

spésifikasi

Detailed specifications for the Stack-On GCB-8RTA Steel 8-Gun Ready to Assemble Security Cabinet:

Diagram showing the dimensions of the Stack-On GCB-8RTA security cabinet.
Figure 5: A diagram illustrating the key dimensions of the Stack-On GCB-8RTA security cabinet: height (134.62 cm), depth (43.18 cm), and width (27.94 cm). This provides a clear visual reference for the cabinet's physical size.
FiturRincian
merekTumpukan-Dina
Nomer modélGCB-8RTA-DS
Kapasitas8 rifles or shotguns (up to 52 inches tall)
Tipe Konci3-point locking system with double-bitted key-coded lock
BahanBaja
WarnaHideung
Ukuran produk (L x W x H)43.18 x 27.94 x 134.62 cm (17 x 11 x 53 inci)
Item Beurat23.31 kg (51.4 lbs)
Fitur hususEasy Assembly, Lockable, Removable Shelf, Patented Barrel Rests
Tipe PamasanganFreestanding, Floor Mount
California ApprovedMeets California Penal Code section 12088

Garansi sareng Rojongan

The product specifications indicate "Warranty Description: N/a." Please refer to your purchase documentation or contact the retailer for specific warranty information, if any, provided at the time of purchase.

For technical support, assembly questions, or parts inquiries, please contact Stack-On customer service. Contact information can typically be found on the manufacturer's official websitus atanapi dina bungkusan produk.

Dokumén Patali - GCB-8RTA-DS

Praview Stack-On GCB-18C Steel Security Cabinet Instructions
Comprehensive instructions for assembling and installing the Stack-On GCB-18C Steel Security Cabinet, including parts lists, configuration options, and warranty information.
Praview Stack-On Welded-Steel Garage Storage Assembly Instructions and Warranty
Comprehensive assembly instructions and limited one-year warranty details for Stack-On Welded-Steel Garage Storage cabinets, covering base, tall, wall, and floor locking models. Includes parts lists, tools needed, and step-by-step guidance.
Praview Stack-On GCM-1918-DX Steel Security Cabinet Assembly Instructions
Detailed assembly and installation instructions for the Stack-On GCM-1918-DX Steel Security Cabinet, including parts list, safety warnings, and warranty information.
Praview Stack-On GCM-1918-DX Security Cabinet Instructions and Warranty
Comprehensive instructions for assembling, configuring, and securing the Stack-On GCM-1918-DX steel security cabinet. Includes parts list, installation guides, and limited one-year warranty information.
Praview Stack-On GCM-1918-DX Gun Cabinet Assembly and Safety Instructions
Comprehensive assembly instructions, safety warnings, parts list, and warranty details for the Stack-On GCM-1918-DX steel gun cabinet. Includes guidance on installation, configuration, and care.
Praview Stack-On Welded-Steel Garage Storage Assembly Instructions and Warranty
Comprehensive assembly instructions and warranty details for Stack-On's welded-steel garage storage cabinets, covering base, tall, wall, and floor locking models. Includes safety guidelines and product specifications.