Manual Pangguna Weiser SmartCode 5 Deadbolt Éléktronik (9GED14900-001)

Bubuka

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Weiser SmartCode 5 Electronic Deadbolt. The SmartCode 5 deadbolt offers keyless entry convenience with a keypad and enhanced security features, including SmartKey re-key technology. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your lock.

Image: The Weiser SmartCode 5 Electronic Deadbolt in Polished Brass finish, featuring a keypad and traditional keyhole.

Fitur produk

• Éntri tanpa konci: Operate the deadbolt using a personalized code on the electronic keypad.
• Téhnologi SmartKey Re-key: Re-key the lock yourself in seconds in three easy steps, allowing you to match your existing keys.
• Traditional Keyed Entry: Includes a standard keyhole for manual operation.
• Interior Turn Button: Lock or unlock the deadbolt from the inside with a simple turn.
• Kaamanan ditingkatkeun: Designed for exterior doors where robust security is essential.
• Konstruksi awét: Features a 1-inch deadbolt throw for added security.

Image: Diagram illustrating the SmartKey Security features, including resistance to kick-ins, bumps, picks, drills, and saws.

Setup sareng Instalasi

Proper installation is crucial for the optimal performance and security of your SmartCode 5 deadbolt. It is recommended to follow the detailed instructions provided in the separate installation guide included with your product. Ensure your door preparation meets the specified dimensions before beginning installation.

Léngkah-léngkah Pamasangan konci:

1. Prepare the door and frame according to the provided template.
2. Pasangkeun kait sareng pelat panyekel.
3. Pasang rakitan keypad luar.
4. Install the interior assembly, ensuring proper cable connection.
5. Insert 4 AA batteries (not included) into the battery pack.
6. Perform the door handing process to calibrate the lock.

SmartKey Re-keying Instructions:

The SmartKey feature allows you to re-key your lock to an existing key. This process takes seconds and requires your functioning key and the SmartKey tool.

1. Insert the currently programmed key fully into the keyhole and turn it 90 degrees clockwise to the horizontal position.
2. Insert the SmartKey tool firmly and fully into the SmartKey hole. Remove the SmartKey tool.
3. Remove the currently programmed key.
4. Insert the new key you wish to use fully into the keyhole and turn it 90 degrees counter-clockwise to the vertical position.
5. Remove the new key. The lock is now re-keyed. Test with the new key to ensure proper operation.

Image: The Weiser SmartCode 5 Electronic Deadbolt installed on a dark wooden door, showcasing its appearance in a home setting.

Parentah Operasi

Ngonci panto:

• From Outside (Keypad): Press the 'Lock' button (the padlock icon) on the keypad.
• From Outside (Key): Insert your key and turn it to lock the deadbolt.
• Ti jero: Turn the thumb turn on the interior assembly to the locked position.

Muka konci panto:

• From Outside (Keypad): Enter your 4-8 digit user code. The deadbolt will retract.
• From Outside (Key): Insert your key and turn it to unlock the deadbolt.
• Ti jero: Turn the thumb turn on the interior assembly to the unlocked position.

Kodeu Pamaké Pemrograman:

The lock comes with a default programming code and two default user codes. It is highly recommended to change these immediately after installation.

1. Buka panutup batré dina rakitan interior.
2. Press the 'Program' button once.
3. Enter the 4-digit Programming Code (default is 0-0-0-0).
4. Press the 'Lock' button.
5. Enter a new 4-8 digit User Code.
6. Press the 'Lock' button.
7. Tés kodeu pangguna anyar pikeun mastikeun éta muka konci panto.

Refer to the full programming guide for instructions on deleting codes, enabling/disabling auto-lock, and other advanced features.

Pangropéa

Ngagantian batré:

The SmartCode 5 deadbolt requires 4 AA batteries. When the batteries are low, the lock will emit a series of beeps and/or flash a red light during operation. Replace all four batteries simultaneously with new, high-quality alkaline AA batteries.

1. Cabut panutup batré tina assembly interior.
2. Leupaskeun batré heubeul.
3. Insert four new AA alkaline batteries, observing correct polarity (+/-).
4. Ganti panutup batré.

beberesih:

Pikeun meresihan konci, ngagunakeun lemes, damp cloth. Avoid abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.

Pamérésan masalah

If you encounter issues with your Weiser SmartCode 5 Electronic Deadbolt, refer to the following common solutions:

• Konci henteu ngabales: Pariksa tingkat batré sareng gentos upami diperyogikeun. Pastikeun sambungan kabel antara rakitan luar sareng jero pageuh.
• Keypad teu hurung: This usually indicates dead batteries. Replace all four AA batteries.
• Deadbolt teu manjang/mundur sapinuhna: Ensure the door frame strike plate is properly aligned and the door is not warped. Perform the door handing process again.
• Kodeu pangguna teu jalan: Verify the code is entered correctly. Try reprogramming the user code. Ensure the programming code has not been changed or forgotten.
• SmartKey re-keying issue: Ensure the original key is fully inserted and turned 90 degrees. The SmartKey tool must be inserted firmly and fully.

For more complex issues or if the problem persists, contact Weiser customer support or consult the full troubleshooting guide available on the Weiser websitus.

spésifikasi

Garansi sareng Rojongan

Weiser products are backed by a limited lifetime mechanical and finish warranty, and a 1-year limited electronics warranty. For specific warranty details, claims, or technical support, please visit the official Weiser websitus atanapi hubungi departemén layanan palangganna. Simpen bukti pameseran anjeun kanggo tujuan garansi.

Weiser Customer Support: Refer to your product packaging or the official Weiser websitus pikeun inpo kontak ayeuna.