Buku Panduan Pangguna Catu Daya Laboratorium VOLTCRAFT PPS-16005

1. Bubuka

The VOLTCRAFT PPS-16005 is a versatile laboratory power supply designed to provide a potential-free DC voltage source for various low-voltage applications. It features adjustable voltage and current outputs, precise digital controls, and programmable memory functions. This manual provides essential information for the safe and efficient operation of your device.

Fitur konci:

• Adjustable Kaluaran Voltage: 1 V/DC to 36 V/DC
• Adjustable Output Current: 0 A to 10 A
• Total Power Output: 360 W
• Dual Output Capability (Front: max 5A, Rear: full rated power)
• Digital Rotary Knobs for Coarse and Fine Adjustment
• Clear Digital Display for Voltage jeung Ayeuna
• Three Freely Programmable Memory Presets
• USB Port for Remote Control and Programmable Duty Cycle Operation
• Software Control for up to 20 programmable voltage/current sets

2. Parentah Kasalametan

Salawasna merhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu atanapi karusakan kana alat:

• Pastikeun catu daya disambungkeun ka stop kontak anu di-ground.
• Ulah ngajalankeun alat dina baseuh atawa damp kaayaan.
• Ulah muka casing; teu aya bagian anu tiasa diservis ku pangguna di jerona. Serahkan perawatan ka tanaga anu mumpuni.
• Pastikeun ventilasi anu pas di sabudeureun unit pikeun nyegah overheating.
• Ulah ngaleuwihan vol maksimumtage jeung ratings ayeuna.
• Pegatkeun sambungan listrik sateuacan nyieun atawa ngaganti sambungan.
• Use appropriate safety leads and connectors.

3. Eusi Paket

Mangga parios pakét kanggo barang-barang ieu:

• VOLTCRAFT PPS-16005 Laboratory Power Supply
• Kabel listrik
• Kabel USB
• Software CD (or download link)
• Manual pangguna (dokumén ieu)

4. Tata Letak Produk sareng Komponenna

4.1 Panel payun

Gambar 4.1: Hareupeun view of the PPS-16005 power supply, showing the digital display, voltagkenop pangaturan e sareng arus, saklar daya, sareng terminal kaluaran bantu.

• Digital tampilan: Nembongkeun vol ayeunatage (V) and current (A) output values. Includes C.V. (Constant Voltage) sareng indikator CC (Arus Konstan).
• Voltage kenop adjustment: Dianggo pikeun nangtukeun voltase kaluarantage. Push for coarse adjustment, rotate for fine adjustment.
• kenop adjustment ayeuna: Used to set the output current limit. Push for coarse adjustment, rotate for fine adjustment.
• Saklar kakuatan: Ngaganti daya utama ka unit.
• Kaluaran Bantu (Maks. 5A): Front 4mm safety sockets for output up to 5A.
• Indikator Kontrol Tukang: Indicates when remote control is active.

4.2 Panel tukang

Gambar 4.2: Tukangeun view of the PPS-16005 power supply, showing the main output terminals, USB port, remote control port, and cooling fan.

• Main Output Terminals: High-current screw terminals for full rated power output (up to 10A).
• Port USB: Pikeun nyambungkeun ka komputer pikeun kadali jarak jauh sareng pamrograman.
• Port kadali jauh: For external remote control.
• Pindah mode: Milih antara modeu Normal, Preset, sareng Remote Control.
• Tombol Pangéling (P1, P2, P3): Used to recall stored memory presets.
• Kipas pendingin: Ensures proper thermal management.
• Inlet Daya AC: Pikeun nyambungkeun kabel listrik.

5. Setélan

1. panempatan: Place the power supply on a stable, level surface with adequate ventilation. Ensure no objects block the cooling fan on the rear panel.
2. Sambungan Daya: Connect the supplied power cord to the AC Power Inlet on the rear panel and then to a grounded wall outlet.
3. Daya mimiti Hurung: Flip the Power Switch on the front panel to the 'I' (On) position. The digital display should illuminate.
4. Sambungan Kaluaran:
   • For loads up to 5A, use the 4mm safety sockets on the front panel.
   • For loads requiring full rated power (up to 10A), use the high-current screw terminals on the rear panel.

   penting: Always ensure the power supply is off before connecting or disconnecting any load.

6. Parentah Operasi

6.1 Manual Operation (Normal Mode)

1. Ensure the Mode Switch on the rear panel is set to "Normal".
2. Setélan Voltage: Rotate the Voltage Adjustment Knob to set the desired output voltage. Push the knob for coarse adjustment (larger steps), and rotate without pushing for fine adjustment (smaller steps).
3. Nyetél Wates Ayeuna: Rotate the Current Adjustment Knob to set the desired maximum output current. This acts as a current limit. Push the knob for coarse adjustment, rotate without pushing for fine adjustment. The C.C. indicator will illuminate when the current limit is reached.
4. Beban Nyambungkeun: Sakali voltage and current limits are set, connect your device to the appropriate output terminals.
5. Kaluaran Pemantauan: The digital display will show the actual output voltage and current. The C.V. indicator illuminates when operating in Constant Voltage mode, and C.C. illuminates when operating in Constant Current mode (i.e., current limit is active).

6.2 Ngagunakeun Preset Mémori

The PPS-16005 allows you to store and recall three different voltage sareng setélan ayeuna.

1. Storing a Preset:
   • Nyetél vol nu dipikahoyongtage sareng arus nganggo kenop masing-masing.
   • Press and hold one of the Recall Buttons (P1, P2, or P3) on the rear panel for approximately 3 seconds until a confirmation beep or display change indicates the setting has been saved.
2. Ngingetkeun Preset:
   • Ensure the Mode Switch is set to "Preset".
   • Briefly press the desired Recall Button (P1, P2, or P3). The stored voltage and current values will be loaded and applied to the output.

6.3 Remote Control via USB

The power supply can be controlled remotely via a USB connection to a computer using the provided software.

1. Pamasangan parangkat lunak: Install the control software from the provided CD or download it from the VOLTCRAFT website. Follow the on-screen instructions.
2. Nyambungkeun USB: Connect the USB cable from the power supply's USB port to your computer.
3. Set Mode: Set the Mode Switch on the rear panel to "Remote Ctrl". The "Rear Control" indicator on the front panel will illuminate.
4. Operasi software: Launch the software on your computer. You can now set voltage, current, and program duty cycles (up to 20 sets, repeatable up to 999 times) directly from your computer interface. Refer to the software's help documentation for detailed instructions on its features.

7. Pangropéa

• beberesih: Cabut catu daya tina stop kontak sateuacan dibersihkeun. Anggo lawon anu lemes sareng garing pikeun ngusap bagian luarna. Entong nganggo pembersih atanapi pangleyur anu abrasif.
• Ventilasi: Regularly check that the cooling fan and ventilation openings are free from dust and debris. Use compressed air to clear blockages if necessary.
• Panyimpenan: Upami henteu dianggo salami lami, simpen catu daya di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.

8. Cara ngungkulan

9. Spésifikasi

10. Garansi jeung Rojongan

Garansi: This product comes with a 1-year warranty for spare parts availability.

Kabijakan pamulangan: Standard 30-day return policy applies for refunds/replacements when purchased from Amazon.

For technical support, troubleshooting assistance, or warranty claims, please contact VOLTCRAFT customer service or visit their official website. Contact information can typically be found on the product packaging or the VOLTCRAFT websitus.