1. Bubuka
The AmScope D120A-MS is a dual-view compound monocular microscope designed for high magnification observation in biological and educational applications. It features a versatile viewing head, multiple objective lenses, Brightfield illumination, and a mechanical stage for precise specimen manipulation. This manual provides essential information for the proper setup, operation, and maintenance of your microscope.
2. Pedoman Kasalametan
- Salawasna ati-ati dina ngagunakeun mikroskop. Hindarkeun gerakan atanapi tabrakan anu ujug-ujug.
- Ensure the microscope is placed on a stable, level surface to prevent tipping.
- Connect the power cord to a grounded electrical outlet of the correct voltage (110V).
- Do not touch optical surfaces with bare hands. Use lens paper or a soft, lint-free cloth for cleaning.
- Unplug the microscope from the power source before cleaning or performing any maintenance.
- Jauhkeun mikroskop tina sinar panonpoé langsung, suhu anu luhur, lebu, sareng bahan kimia korosif.
- Supervise children or inexperienced users to ensure safe operation.
3. Eusi Paket
Sacara saksama ngabongkar sadaya komponén sareng pariksa yén barang-barang ieu kalebet:
- AmScope D120A-MS microscope with mechanical stage
- WF10x eyepiece
- WF16x eyepiece
- 4x DIN achromatic objective
- 10x DIN achromatic objective
- 40xS DIN achromatic objective (spring-loaded)
- 100xS (oil) DIN achromatic objective (spring-loaded)
- (2) Color filters
- Bohlam cadang
- Panutup lebu
- Manual instruksi (dokumen ieu)
4. Idéntifikasi komponén
Familiarize yourself with the main parts of your AmScope D120A-MS microscope:
Gambar 4.1: Leuwihview of the AmScope D120A-MS microscope. This image displays the complete microscope assembly, including the base, stage, objective lenses, and dual-view monocular head.
- Eyepiece (Ocular): Ka mana anjeun ningali view the specimen. The D120A-MS includes WF10x and WF16x eyepieces.
- Monokular ViewKepala: The upper part of the microscope containing the eyepiece tube. This model features a dual-view head with a fixed 45-degree inclined tube and a vertical port.
- Revolving Nosepiece: Holds the objective lenses and allows for easy switching between magnifications.
- Lensa Objektif: The primary magnification components (4x, 10x, 40xS, 100xS oil).
- Mékanik Stage: A platform where the specimen slide is placed, with controls for precise X-Y movement.
- Stage Klip: Secure the specimen slide on the mechanical stage.
- Coarse Focus Knob: Large knob for rapid focusing adjustments.
- Fine Focus Knob: Small knob for precise focusing adjustments.
- Illuminator (Light Source): Located beneath the stage, provides light for viewing. This model uses variable-intensity tungsten illumination.
- Kondensor Abbe: Located below the stage, focuses light onto the specimen. Features a 1.25 NA and an iris diaphragm.
- Iris diafragma: Controls the amount of light passing through the specimen.
- Dasar: The stable bottom support of the microscope.
5. Majelis jeung Setup
Follow these steps to set up your microscope for initial use:
- Ngabongkar bungkusan: Carefully remove the microscope and all accessories from the packaging. Retain the original packaging for future transport or storage.
- panempatan: Place the microscope on a sturdy, level surface, away from vibrations and direct sunlight.
- Pemasangan Lensa Mata: Insert the desired eyepiece (WF10x or WF16x) into the inclined eyepiece tube of the monocular head. Gently twist to secure it.
- Instalasi Tujuan: The objective lenses are typically pre-installed. If not, carefully screw each objective into the revolving nosepiece in increasing order of magnification (4x, 10x, 40xS, 100xS). Ensure they are finger-tight.
- Sambungan Daya: Connect the power cord to the microscope's power input and then to a standard 110V electrical outlet.
- Panutup lebu: Upami teu dianggo, tutup mikroskop ku panutup lebu anu disayogikeun pikeun ngajagi tina lebu sareng kokotor.
Gambar 5.1: Pahareup-hareup view of the objective lenses mounted on the revolving nosepiece. This image shows the 4x, 10x, 40xS, and 100xS (oil) objectives in position.
6. Operasi dasar
This section outlines the fundamental steps for observing specimens with your microscope.
- Daya Hurung: Flip the power switch located on the base of the microscope. The illuminator should light up.
- Saluyukeun iluminasi: Use the variable intensity control knob to set the desired brightness. Adjust the iris diaphragm on the Abbe condenser to optimize contrast and resolution for your specimen.
- Place Specimen: Rotate the revolving nosepiece to select the lowest power objective (4x). Lower the mechanical stage using the coarse focus knob. Place a prepared specimen slide onto the mechanical stage sarta ngamankeun eta kalawan stage klip.
- Position Specimen: Paké XY stage control knobs to move the slide until the area of interest is centered under the objective lens.
- Fokus:
- While looking through the eyepiece, slowly raise the stage ngagunakeun coarse focus knob until the specimen comes into rough focus.
- Ngagunakeun éta fine focus knob to achieve a sharp, clear image.
- Ngarobah Magnification: Once focused at low power, rotate the revolving nosepiece to switch to a higher power objective (e.g., 10x, 40xS). Due to the parfocal design, only minor adjustments with the fine focus knob should be needed to bring the image back into sharp focus.
- Using the 100xS Oil Immersion Objective:
- After focusing with the 40xS objective, rotate the nosepiece halfway between the 40xS and 100xS objectives.
- Place a small drop of immersion oil directly onto the center of the specimen slide where the light passes through.
- Carefully rotate the 100xS objective into the oil drop until it clicks into place. The objective should be immersed in the oil.
- Anggo waé éta fine focus knob to bring the image into sharp focus. Do not use the coarse focus knob with the 100xS objective.
- After use, clean the 100xS objective and the slide immediately with lens paper moistened with lens cleaning solution to remove all immersion oil.
- ganda-View Fungsionalitas: The vertical port on the monocular head can accept a second eyepiece for simultaneous viewing by another person or a camera mount for digital image capture (eyepiece and camera sold separately). Dioptric adjustment on the upright tube accommodates individual eye-strength differences.
Gambar 6.1: The AmScope D120A-MS microscope demonstrating its digital image capture capability by connecting to a laptop. This setup utilizes the vertical port for a camera attachment.
7. Pangropéa sarta perawatan
Proper maintenance ensures the longevity and optimal performance of your microscope.
- Lensa beberesih: Use only specialized lens paper and lens cleaning solution for optical surfaces. Gently wipe in a circular motion. Never use abrasive cloths or harsh chemicals.
- beberesih umum: Lap awak mikroskop ku kaén nu lemes,amp lawon. Hindarkeun kalembaban asup kana komponén listrik.
- Panyimpenan: Always cover the microscope with the dust cover when not in use. Store it in a dry, dust-free environment.
- Ngagantian bohlam: If the illuminator bulb burns out, unplug the microscope. Refer to the base of the microscope for access to the bulb compartment. Carefully replace the old bulb with the provided spare bulb, ensuring not to touch the glass part of the new bulb with bare hands.
- Bagian mékanis: Do not attempt to lubricate or disassemble any mechanical parts. If issues arise, contact customer support.
8. Cara ngungkulan
Bagian ieu ngabahas masalah umum anu anjeun tingali.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya katerangan | Power cord disconnected, power switch off, bulb burnt out | Check power connection, turn on switch, replace bulb |
| Gambar buram atawa teu fokus | Incorrect focus adjustment, objective not fully engaged, dirty lens | Adjust coarse/fine focus, rotate nosepiece until objective clicks, clean lenses |
| Medan poék view | Iris diaphragm closed, illuminator too dim, condenser too low | Open iris diaphragm, increase illuminator brightness, adjust condenser height |
| Lebu atawa bintik-bintik dina view | Dust on eyepiece, objective, or slide | Clean eyepiece, objective, or slide with lens paper |
| Cannot focus at 100x | No immersion oil, air bubbles in oil, coarse focus used | Apply immersion oil, remove air bubbles, use only fine focus |
9. Spésifikasi Téknis
Detailed specifications for the AmScope D120A-MS microscope:
- Kepala: Compound dual-view monocular, 45-degree inclined, 360-degree rotatable
- Eyepieces: WF10x, WF16x (with pointer)
- Tujuan: 4X, 10x, 40xS (spring), 100xS (oil, spring) DIN achromatic
- Rentang Magnification: 40X - 1600X
- Stage: Mékanik stage with X-Y axis movement, stage eureun
- Konfigurasi cahaya: Transmitted (lower)
- Condenser: Abbe, 1.25 NA
- diafragma: Iris diafragma
- Sumber cahaya: Tungsten (incandescent), variable intensity
- Jenis katerangan: Brightfield
- kakuatan: 110V
- Bahan: Metal, tungsten
- Ukuran (L x W x H): 15 x 7.5 x 5.125 inci (kira-kira)
- beurat: 10 pon
10. Garansi sarta Rojongan Palanggan
For warranty information, technical assistance, or to purchase replacement parts, please contact AmScope customer support. Refer to the AmScope website or your purchase documentation for current contact details.
