Bubuka
This manual provides essential information for the safe and effective operation of your Cen-Tech 9 Volt Metal Detector 6-inch Wand Scanner. This device is designed to locate metal objects, particularly those embedded in wood, and can also serve as a security scanning tool. Please read this manual thoroughly before use and retain it for future reference.
Image: The Cen-Tech 9 Volt Metal Detector, a black handheld wand with yellow "CEN-TECH" branding.
Émbaran Kasalametan
- Always operate the device in a safe manner.
- Ulah ngalaan alat ka suhu ekstrim atawa beueus.
- Jauhkeun tina jangkauan barudak.
- Buang batré anu leres nurutkeun peraturan lokal.
- Do not attempt to modify or repair the device yourself. Refer to qualified service personnel.
Eusi pakét
- Cen-Tech 9 Volt Metal Detector Wand Scanner
- Panyimpenan Case
- Manual pangguna (dokumén ieu)
Note: A 9V battery is required for operation and is sold separately.
Setup: Pamasangan Batré
The Cen-Tech Metal Detector requires one 9-volt battery for operation.
- Locate the battery compartment cover, typically on the handle or rear of the device.
- Geser atawa cabut panutup panutup pikeun muka kompartemen.
- Insert a fresh 9-volt battery, ensuring the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
- Ganti panutup kompartemen batré aman.
- Alat ayeuna tos siap dianggo.
Parentah Operasi
Ngahurungkeun/Pareuman
- To turn the detector ON, slide the power switch to the "ON" position. You may hear a brief beep and see an LED light up, indicating it is active.
- To turn the detector Pareum, slide the power switch to the "OFF" position.
Ngadeteksi Logam
- Hold the wand scanner by the handle and sweep the 6-inch wand head slowly and steadily over the area you wish to scan.
- When metal is detected, the device will emit an audio alarm (a distinct beeping sound) and/or activate the LED visual alert (a flashing light). The intensity of the alarm may increase as you get closer to the metal object.
- Pinpoint the exact location by narrowing your sweep area once an alarm is triggered.
Ngurangan sensitipitas
- The detector features a 50% sensitivity reduction button. Press and hold this button to temporarily decrease the sensitivity of the detector. This is useful for scanning in areas with high levels of ambient metal or when trying to ignore smaller, less significant metal objects.
- Release the button to return to full sensitivity.
Siaga Batré Lemah
- The device is equipped with a low battery alert. When the battery power is low, the detector's performance may diminish, and a specific indicator (e.g., a continuous low tone or a specific LED pattern) will activate.
- Replace the 9-volt battery immediately when the low battery alert is active to ensure optimal performance.
Fitur
- Detects metal embedded in wood.
- May also be used as a security scan device.
- 6-inch wand for one-pass coverage.
- Audio alarm and LED visual alert.
- 50% sensitivity reduction button.
- Waspada batré lemah.
- Comes with a handy carrying case.
Pangropéa
- beberesih: Wipe the detector with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Panyimpenan: When not in use, store the detector in its provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Batré: Cabut batréna upami alat moal dianggo salami waktos anu lami pikeun nyegah bocor sareng karusakan.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Detector does not turn on. | Batré pareum atawa salah dipasang. | Check battery polarity. Replace with a fresh 9V battery. |
| Weak or inconsistent detection. | Low battery. Interference from other electronic devices. | Replace battery. Move away from other electronics. Ensure sensitivity reduction button is not pressed. |
| Constant alarm without metal present. | High ambient metal. Device too close to metal objects during power-on. | Move to an area free of metal to power on. Use the sensitivity reduction button. |
| No audio or LED alert. | Battery issue. Internal malfunction. | Check/replace battery. If problem persists, contact customer support. |
spésifikasi
| merek | Cen-Tech |
| Nomer modél | 94138 |
| Sumber Daya | Batré 9V (teu kalebet) |
| Jenis Deteksi | logam |
| Wand Size | 6 inci |
| Siaga | Audio Alarm, LED Visual Alert, Low Battery Alert |
| Fitur husus | 50% Sensitivity Reduction Button |
| Diménsi | 16.5 x 5 x 2 inci |
| Item Beurat | 1.45 pon |
| Bahan | Wood, Metal (referring to detected materials) |
| Peunteun Protection Internasional | IP54 |
Garansi sareng Rojongan
Cen-Tech products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Cen-Tech websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.
For further assistance, you may contact Cen-Tech customer service through their official channels. Always provide your product model number (94138) when seeking support.
