TASCAM DR-100MKII Linear PCM Recorder

Bubuka

The TASCAM DR-100MKII is a high-performance linear PCM recorder designed for professional audio recording. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DR-100MKII to ensure optimal performance and longevity.

Fitur konci

• High-resolution 24-bit/96kHz linear PCM (WAV) and MP3 recording.
• Robust aluminum chassis for durability in demanding environments.
• Dual XLR/TRS combo inputs with +4dBu line level and +48V phantom power.
• Independent left/right rotary input gain controls for precise level adjustment.
• Four built-in microphones: two unidirectional and two omnidirectional.
• Dedicated line output separate from headphone output for high-quality audio routing.
• Digital input for lossless connection from external playback devices.
• Mechanical switches for reliable and quick operation.
• Supports SD/SDHC memory cards (2GB SD card included).
• Includes RC-10 wired/wireless remote control.
• Dual battery power system (dedicated Li-ion and AA batteries).

Disetél

1. Pamasangan batré

The DR-100MKII supports both a dedicated Li-ion rechargeable battery (BP-L2, included) and two AA dry cell batteries. For extended operation, both can be used simultaneously.

1. Tangtukeun lokasi kompartemen batré dina tonggong unit.
2. Buka panutup batré.
3. Insert the BP-L2 Li-ion battery into its designated slot, ensuring correct polarity.
4. Insert two AA batteries into their respective slots, observing the polarity markings.
5. Tutup panutup batre aman.

Gambar 1: Tukangeun view of the DR-100MKII, showing the battery compartment and various switches for mic gain, auto/limiter, and speaker.

2. Instalasi Kartu SD

The DR-100MKII uses SD or SDHC memory cards for recording. A 2GB SD card is included.

1. Locate the SD card slot on the bottom of the unit.
2. Gently push the SD card into the slot until it clicks into place. Ensure the card is inserted with the correct orientation.
3. To remove, push the card in again until it springs out slightly, then pull it out.

Gambar 2: Handap view of the DR-100MKII, highlighting the SD card slot and the built-in omnidirectional microphones.

3. Nyambungkeun Mikropon jeung Input Line

The DR-100MKII offers versatile input options, including XLR/TRS combo jacks and a dedicated line input.

• XLR/TRS Inputs: Located on the bottom of the unit, these inputs support balanced XLR microphones (with +48V phantom power if needed) or 1/4-inch TRS line-level devices. The locking mechanism ensures secure connections.
• Line 2 Input: A 3.5mm stereo mini-jack input is available on the side for connecting external line-level devices.
• Input Digital: A dedicated digital input terminal allows for lossless connection from compatible digital audio sources.

angka 3: Tutup-up view of the DR-100MKII's bottom, showing the locking XLR (MIC/LINE 1) inputs for professional audio connections.

Gambar 4: Sisi view of the DR-100MKII, displaying the USB port, DC IN 5V, headphone output, and Line 2 input/output jacks.

4. Connecting Headphones and Line Output

• Kaluaran headphone: Connect your headphones to the 3.5mm headphone jack on the side for monitoring audio.
• Kaluaran Jalur: A dedicated 3.5mm stereo mini-jack line output is available for connecting the DR-100MKII to external mixers, amplifiers, or other audio devices. This output is independent of the headphone output.

5. Powering on / Pareum

To power on the unit, slide the power switch located on the side. To power off, slide the switch to the OFF position.

Ngoperasikeun

1. Rekaman Dasar

The DR-100MKII can record in WAV (linear PCM) or MP3 formats.

1. Pilih Sumber Input: Use the INPUT switch to select between the built-in microphones (UNI MIC L/R, OMNI MIC L/R) or external inputs (XLR/LINE 1, LINE 2).
2. Saluyukeun Tingkat Input: Use the large rotary input volume controls (L and R) on the top of the unit to set the recording level. Monitor the level meters on the LCD to avoid clipping.
3. Press RECORD: Pencét éta RECORD button to start recording. The button will illuminate.
4. Eureun Rekaman: Pencét éta EUREUN tombol pikeun ngeureunkeun rékaman.

Gambar 5: Hareupeun view of the DR-100MKII, showing the main display, control buttons, and built-in unidirectional microphones.

Gambar 6: Top view of the DR-100MKII, illustrating the large rotary input volume dials for precise left and right channel gain adjustment.

2. Advanced Recording Functions

• Auto Gain Control & Limiter: These functions automatically adjust the recording level to prevent distortion. Enable them via the switches on the back of the unit.
• Pra-catetan: Captures audio from 2 seconds before the RECORD button is pressed.
• Rékam reureuh: Delays recording start slightly to avoid capturing button press noise.
• Saringan Low-Cut: Reduces unwanted low-frequency noise (e.g., wind, rumble). Settings: OFF/40/80/120Hz.
• Overdubbing: Allows recording new audio over an existing file, nyieun anyar file.

3. Puterkeun deui

1. Pilih File: Use the navigation buttons to select the desired audio file ti daptar.
2. Press PLAY/PAUSE: Pencét éta MUTER / Reureuh tombol pikeun ngamimitian playback.
3. Ngatur Volume Putar: Use the volume controls on the side of the unit.
4. Repeat/Loop: Access these functions through the menu for continuous playback of a file or a specific section.
5. VSA (Variable Speed Audition): Adjust playback speed without changing the pitch, useful for transcription or learning.

4. File Manajemén

• Mark Function: Add marks at specific points in a recording for easy navigation.
• Track Increment: Automatically or manually split recordings into new files. Auto track increment can be based on file size or input level.
• Divide Function: Split a WAV file into two at a desired point.
• Gancang Tag: Gancang tag files for identification.

5. Using the Remote Control (RC-10)

The included RC-10 remote control can be used wirelessly (infrared) or wired for precise operation, minimizing handling noise during recording.

• Operasi nirkabel: Point the remote at the DR-100MKII's IR receiver.
• Operasi kabel: Connect the remote to the REMOTE/DIGITAL IN port on the side of the unit using the provided cable.

Gambar 7: Angled view of the DR-100MKII, showing the REMOTE/DIGITAL IN port on the side, used for the RC-10 remote control and digital audio input.

Pangropéa

1. beberesih

Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.

2. Kaperawatan batré

• Cabut batré upami unit moal dianggo kanggo waktos anu panjang pikeun nyegah bocor.
• Recharge the Li-ion battery regularly to maintain its capacity.

3. SD Card Care

• Always format new SD cards with the DR-100MKII before first use.
• Avoid removing the SD card during recording or playback to prevent data corruption.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

For warranty information, technical support, and service, please refer to the official TASCAM website or contact your local TASCAM distributor. Keep your purchase receipt as proof of purchase for warranty claims.

Online resources, including updated manuals and software, may be available on the TASCAM support page.