Bubuka
This manual provides essential information for the safe and efficient operation of your DECA Mach 214 battery charger. Please read these instructions carefully before use and retain them for future reference. The DECA Mach 214 is designed for charging 6V and 12V lead-acid batteries.
Parentah Kasalametan
PERHATOSAN: Gagalna nuturkeun parentah kaamanan ieu bisa ngakibatkeun shock listrik, seuneu, atawa tatu serius.
- Always connect the charger to a grounded power outlet (230 Volts).
- Ensure the charging area is well-ventilated to prevent the accumulation of explosive gases.
- Anggo panyalindungan panon sareng pakean pelindung nalika damel sareng batré.
- Ulah ngecas batré anu beku. Keun heula nepi ka cair sateuacan dicas.
- Pernah noél batré clamps together when the charger is powered on.
- Cabut kabel daya AC sateuacan nyieun atawa megatkeun sambungan kana batréna.
- Keep the charger away from water, rain, and excessive moisture.
- Alat ieu henteu dimaksudkeun pikeun dianggo ku jalma (kalebet murangkalih) anu ngirangan kamampuan fisik, indrawi atanapi mental, atanapi kirang pangalaman sareng pangaweruh, kecuali aranjeunna dipasihan pangawasan atanapi petunjuk ngeunaan panggunaan alat ku jalma anu tanggung jawab kana kasalametanana.
Produk Leuwihview
The DECA Mach 214 is a robust battery charger designed for reliability and ease of use. It features a durable painted steel structure and provides essential protection against reverse polarity and short circuits.
Gambar 1: Hareupeun view of the DECA Mach 214 Battery Charger, showing its compact design, control panel, and output cables with clamps.
Komponén konci:
- Unit Utama: Houses the charging circuitry and controls.
- Kabel listrik: For connecting to a 230V AC power supply.
- Charging Cables with Clamps: Beureum (+) jeung Hideung (-) clamps pikeun nyambungkeun kana terminal batré.
- Panél kontrol: (If visible on image, describe indicators/switches)
Parentah Setup
- Nyiapkeun batré: Ensure the battery is clean and free of corrosion. If it's a serviceable battery, check electrolyte levels and top up with distilled water if necessary.
- Pilih Voltage: The DECA Mach 214 supports both 6V and 12V batteries. Ensure the charger is set to the correct voltage pikeun batré Anjeun.
- Nyambung ka Batré:
- Nyambungkeun BEUREUM (+) positip clamp ka terminal positif batréna.
- Nyambungkeun HIDEUNG (-) négatip clamp kana terminal négatip batréna.
- Ensure connections are secure and there is no contact between the clamps or other metal parts.
- Nyambung ka Daya: Plug the charger's power cord into a standard 230 Volt AC grounded electrical outlet.
Parentah Operasi
Once properly connected, the DECA Mach 214 will begin charging. The charger provides a charging current of 4 Amperes.
- Mimitian Ngecas: After connecting the battery and plugging in the charger, the charging process will start automatically.
- Monitor ngecas: Observe the charging process. Some chargers have indicators for charging status.
- Waktu Ngecas: Charging time varies depending on the battery's state of charge and capacity. The charger will deliver a constant 4 Amp current until the battery is fully charged.
- End of Charging: Once the battery is fully charged, disconnect the charger from the AC power outlet first, then disconnect the negative (black) clamp, followed by the positive (red) clamp ti batréna.
Pangropéa
- beberesih: Pegatkeun sambungan pangecas tina kakuatan sateuacan beberesih. Ngusap bagian luar ku garing atawa rada damp lawon. Ulah make pangleyur atawa cleaners abrasive.
- Panyimpenan: Store the charger in a dry, cool place when not in use. Keep cables neatly coiled.
- Pamariksaan: Periodically inspect the power cord, charging cables, and clamps for any signs of damage. Do not use the charger if any part is damaged.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Charger not turning on/no output. | No AC power; loose connections; internal fault. | Check power outlet and connections. Ensure charger is plugged in. If problem persists, contact support. |
| Batré teu ngecas. | salah voltage selection; poor battery connection; deeply discharged battery; faulty battery. | Verifikasi voltage setting (6V/12V). Ensure clamps are securely attached. Check battery condition. |
| Charger jadi panas. | Normal during charging; poor ventilation; excessive load. | Ensure adequate ventilation around the charger. If overheating is extreme, disconnect and allow to cool. |
| Protection against reverse polarity or short-circuit activated. | Clamps connected incorrectly; clamps touched together. | Disconnect from power, correct the connections, then reconnect. |
spésifikasi
- merek: DEKA
- model: Mach 214
- Masukan Voltage: 230 volt
- Daya Input: 50 Watt
- Ngecas Voltage: 6 / 12 volt
- Ngecas Ayeuna: 4 Amperes
- Jumlah Port Ngecas: 1
- beurat: 1 Kilogram
- warna: Hideung
- Standar Kasalametan: CE
- Fitur panyalindungan: Reverse Polarity, Short-Circuit
- Struktur: Dicét baja
Garansi sareng Rojongan
For warranty information and technical support, please refer to the documentation provided with your purchase or contact your local DECA distributor. Keep your proof of purchase for warranty claims.
