1. Bubuka
This manual provides comprehensive instructions for the safe and efficient use of your Deca 300300 Matic 116 traditional electronic battery charger. Please read all instructions carefully before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
2. Émbaran Kasalametan
Always observe the following safety precautions when using the battery charger:
- Kasalametan listrik: Pastikeun carjer disambungkeun ka stop kontak grounded. Ulah ngajalankeun carjer ku cords ruksak atawa colokan. Hindarkeun kontak sareng cai atanapi permukaan baseuh.
- Gas ngabeledug: Batteries can produce explosive gases during charging. Ensure adequate ventilation in the charging area. Avoid open flames, sparks, and smoking near the battery.
- Perlindungan Panon sareng Kulit: Wear appropriate eye protection (safety glasses) and protective clothing when working with batteries. Battery acid is corrosive.
- Barudak sareng Karyawan Anu Teu Diidinan: Keep the charger and battery out of reach of children. Do not allow untrained individuals to operate the charger.
- Kasaluyuan batré: Only charge 12V lead-acid batteries (wet, AGM, gel) within the specified capacity range (5 Ah to 90 Ah). Do not attempt to charge non-rechargeable batteries or batteries with different voltages.
- Ventilasi: Ensure the charger itself has adequate ventilation during operation to prevent overheating.
- Pegatkeun sambungan: Always disconnect the AC power from the charger before disconnecting the battery clamps.
3. Produk Langkungview
The Deca 300300 Matic 116 is a traditional electronic battery charger designed for 12V lead-acid automotive batteries. It features electronic control for charging current, automatic charge termination, and an automatic reset function. The charger is supplied with clamp connectors for easy attachment to battery terminals.
3.1. Charger Components
Gambar 1: Hareupeun view of the Deca 300300 Matic 116 Battery Charger. This image shows the black, rectangular electronic battery charger with an integrated handle on top. The front panel features a prominent yellow and red label displaying 'MATIC 116', 'ELECTRONIC BATTERY CHARGER', '12V', 'min 5Ah', 'MAX 90Ah', and the 'deca' logo. To the left of the label are three LED indicators: a red LED (top) for error/reverse polarity, a yellow LED (middle) indicating charging ('CHARGE'), and a green LED (bottom) indicating charge complete ('OK'). Icons representing car and van batteries are also visible on the label.
The front panel includes indicator lights to show the charging status:
- LED Beureum: Indicates an error, such as reverse polarity connection or a faulty battery.
- Yellow LED (CHARGE): Illuminates when the battery is actively charging.
- Green LED (OK): Illuminates when the battery is fully charged and the charging process has terminated.
4. Setélan
Follow these steps to set up your Deca 300300 Matic 116 charger:
- Persiapan: Ensure the battery is clean and free of corrosion on its terminals. If charging a wet lead-acid battery, check the electrolyte level and top up with distilled water if necessary, following the battery manufacturer's instructions.
- Ventilasi: Place the battery and charger in a well-ventilated area.
- Sambungkeun Clamps:
- Nyambungkeun beureum (+) clamp ka nu positip (+) terminal tina batréna.
- Nyambungkeun hideung (-) clamp ka nu terminal négatip (-). tina batréna.
penting: Ensure correct polarity. Reverse polarity will trigger the red error LED.
- Nyambung ka Daya: Plug the charger's power cord (CEE 7/16 Europlug) into a standard 230V AC, 50/60 Hz grounded electrical outlet.
5. Parentah Operasi
Once the charger is set up and connected, it will automatically begin the charging process:
- Mimitian Ngecas: After connecting to the battery and power, the charger will automatically detect the battery and start charging. The yellow 'CHARGE' LED will illuminate.
- Monitor ngecas: Allow the charger to operate until the green 'OK' LED illuminates. This indicates that the battery is fully charged and the charger has automatically terminated the charging process.
- Charge Termination: The electronic control system ensures that the battery is not overcharged. Once the 'OK' LED is lit, the charger maintains the battery at an optimal level.
- Pegatkeun sambungan:
- First, unplug the charger from the AC power outlet.
- Next, disconnect the black (-) clamp from the battery's negative terminal.
- Finally, disconnect the red (+) clamp from the battery's positive terminal.
6. Pangropéa
Pangropéa rutin mastikeun umur panjang sareng kinerja optimal carjer anjeun:
- beberesih: Disconnect the charger from both AC power and the battery before cleaning. Wipe the exterior of the charger with a dry or slightly damp lawon. Ulah make bahan kimia atawa pangleyur kasar.
- Kabel sareng Clamp Pamariksaan: Periodically inspect the power cord, charging cables, and clamppikeun tanda-tanda karusakan, geugeut, atanapi korosi. Ganti komponén anu ruksak langsung.
- Panyimpenan: Simpen carjer di tempat anu tiis sareng garing nalika henteu dianggo. Jauhkeun tina sinar panonpoé langsung, kalembaban, sareng suhu anu ekstrim.
7. Cara ngungkulan
If you encounter issues with your Deca 300300 Matic 116 charger, refer to the following table:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Charger not turning on / No LEDs lit | No AC power; Faulty power outlet; Damaged power cord. | Check power connection; Test outlet with another device; Inspect power cord for damage. |
| LED beureum hurung | Reverse polarity connection; Short circuit; Faulty battery. | Pegatkeun sambungan sareng sambungkeun deui clamps ensuring correct polarity (+ to +, - to -); Check for short circuits; Have battery tested by a professional. |
| Yellow 'CHARGE' LED does not light up | Battery already fully charged; Poor connection to battery terminals; Battery voltage too low or too high for charger. | Check if green 'OK' LED is lit; Clean battery terminals and re-connect clamps securely; Ensure battery is 12V and within 5-90 Ah capacity. |
| Batré teu ngecas atanapi ngecas laun | Poor connection; Battery sulfation; Battery capacity too large for charger. | Ensure secure connections; Battery may be beyond recovery; Verify battery capacity is within 90 Ah maximum. |
8. Spésifikasi
Key technical specifications for the Deca 300300 Matic 116 charger:
- merek: Deka
- Jumlah modél: 300300
- Sasayogian tanaga: 1ph - 230 V - 50/60 Hz
- Masukan Voltage: 230 Volt (AC)
- Batré Voltage: 12 V
- Average Charging Current: 4 A
- Jenis batré anu cocog: Lead-acid (wet, AGM, gel)
- Rentang Kamampuh Batré: 5 Ah (minimum) to 90 Ah (maximum)
- Jenis colokan: CEE 7/16 Europlug
- Pabrikan: Deca S.P.A.
9. Garansi jeung Rojongan
Information regarding specific warranty terms for the Deca 300300 Matic 116 is not available in this manual. For warranty claims, technical support, or spare parts inquiries, please contact your retailer or the manufacturer directly. Information on spare parts availability and software updates is not provided.
