Televes 5363 Multiband AmpManual Pamaké lifier

1. Bubuka

The Televes 5363 Minikom FI 2150 MHz Multiband Amplifier is designed for SMATV systems. This broadband amplifier, housed in a Zamak casing, features switched-mode power supplies and allows for independent mixing of MATV signals.

Fitur konci:

• Broadband amplifikasi.
• Incorporates switched-mode power supplies.
• Allows mixing of MATV signals via an independent input.
• Ukuran kompak: 180 x 110 x 55 mm.
• High-shielding chassis, manufactured from Zamak.
• Papisah amplification with very low noise figure, preserving signal quality.
• Ultra-reduced ergonomic design.

Gambar 1: Tukangeun view of the Televes 5363 Multiband Amplifier, highlighting the F-connectors for signal inputs and outputs.

2. Émbaran Kasalametan

Please read all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• Sasayogian tanaga: Ensure the device is connected to a power outlet with the correct voltage sareng frékuénsi sakumaha anu ditetepkeun dina spésifikasi téknis.
• Ventilasi: Do not block any ventilation openings. Install the device in a location with adequate airflow to prevent overheating.
• Uap: Do not expose the device to rain, moisture, or excessive humidity. Avoid installing in damp lingkungan.
• beberesih: Disconnect the device from the power supply before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol sprays.
• Palayanan: Entong nyobian ngalayanan produk ieu nyalira. Rujuk sadayana ngalayanan ka tanaga jasa anu mumpuni.
• Pamasangan: Ensure the device is securely mounted on a stable surface to prevent it from falling.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

• Televes 5363 Multiband Amppangagung
• Power cable (integrated or separate, depending on model variant)
• Manual Pitunjuk (dokumén ieu)
• Asesoris pamasangan (screws, colokan témbok)

4. Setup jeung Instalasi

The Televes 5363 amplifier is designed for surface mounting. Follow these steps for proper installation:

4.1. Pamasangan Amppangagung

1. Choose a suitable location for mounting, ensuring it is dry, well-ventilated, and easily accessible for connections.
2. Mark the positions for the mounting screws on the wall or surface.
3. Drill pilot holes if necessary and insert wall plugs.
4. Ngamankeun nu amplifier ngagunakeun screws luyu.

4.2. Connecting Signals

The amplifier features two inputs for different signal bands and an output for the mixed signal. It utilizes an EasyF connection system for reliable connections.

Figure 2: Detail of the input connections and configuration switches on the Televes 5363 amppangagung.

1. VHF/UHF Input: Connect your terrestrial antenna (VHF/UHF) signal cable to the designated input.
2. Input SAT: Connect your satellite dish signal cable to the designated SAT input.
3. Kaluaran: Sambungkeun kaluaran tina amplifier to your SMATV distribution network or directly to your television/receiver.

4.3. Sambungan Daya

Sambungkeun kabel kakuatan ka amplifier and then to a suitable electrical outlet. The amplifier incorporates switched-mode power supplies for efficient operation.

Gambar 3: Hareupeun view of the Televes 5363 Multiband Amplifier, showing the power input.

5. Operasi

The Televes 5363 amplifier is designed for straightforward operation. Once installed and powered, it will amplify and mix the incoming signals.

5.1. Signal Mixing

The amplifier automatically mixes the VHF/UHF terrestrial signals with the satellite (SAT) signals into a single output. This allows for a combined distribution of both signal types through a single cable.

5.2. Gain adjustment

The amplifier provides a gain of 45 dB for the satellite band and an output level of 124 dBuV. Specific gain adjustments for VHF/UHF may be available via internal potentiometers or switches, depending on the exact model variant. Refer to the markings on the device for any adjustable settings.

6. Pangropéa

To ensure optimal performance and longevity of your Televes 5363 Multiband AmpLifier, turutan tungtunan pangropéa basajan ieu:

• beberesih: Bersihkeun bagian luar sacara berkala amplifier with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ventilasi: Ensure that the ventilation slots are free from dust and obstructions to prevent overheating.
• Sambungan: Pariksa sadaya sambungan kabel sacara berkala pikeun mastikeun éta aman sareng bébas tina korosi.
• Lingkungan: Tetep dina ampsimpen dina lingkungan anu garing sareng tiis, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.

7. Cara ngungkulan

If you encounter issues with your Televes 5363 Multiband AmpLifier, tingal masalah sareng solusi umum ieu:

• Henteu aya sinyal:
  • Check all cable connections to ensure they are properly seated.
  • Pariksa yén amplifier is receiving power (check power indicator light if available).
  • Ensure the input signals from the terrestrial antenna and satellite dish are present and strong enough.
• Weak or Poor Quality Signal:
  • Check the quality of the input signals before they reach the amppangagung.
  • Ensure all connections are tight and free from damage or corrosion.
  • Pariksa yén amplifier's gain settings (if adjustable) are appropriate for your installation.
• Henteu aya kakuatan:
  • Check the power cable connection to both the amplifier and the electrical outlet.
  • Uji stop kontak listrik nganggo alat anu sanés pikeun mastikeun fungsina.

Upami masalahna teras-terasan saatos nyobian solusi ieu, hubungi dukungan téknis anu mumpuni.

8. Spésifikasi Téknis

9. Garansi jeung Rojongan

This Televes product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Televes websitus.

For technical support, service, or inquiries regarding your Televes 5363 Multiband Amplifier, please contact your local dealer or the Televes customer service department. Contact information can typically be found on the product packaging or the official Televes websitus.