Bubuka
This manual provides essential information for the safe and efficient operation of your XtremepowerUS 4500GPH 19-inch Sand Filter with 1.5HP Above Ground Swimming Pool Pump System. Please read all instructions carefully before installation and use.
Fitur konci:
- Sistem Saringan Keusik: Pump and filter are engineered for optimal flow rates, promoting clean water quality.
- Desain Low Noise: Optimized for quiet operation, enhancing comfort and energy efficiency.
- Performance diandelkeun: Maintains sand height for maximum filtration surface, consistent performance, and efficient back-washing.
- 5-Way Multi-Port Filter: Provides ease of use and quick back-washing. (Note: These pumps are capacitor start and not for use/sale in California).
- Karanjang Saringan: Features a large pump strainer basket with an easy-open, quick-lock, transparent pump lid for reduced maintenance.
Émbaran Kasalametan
Salawasna turutan tindakan pencegahan kaamanan dasar pikeun ngirangan résiko kahuruan, sengatan listrik, sareng tatu ka jalma, kalebet ieu di handap:
- Baca sadaya parentah sateuacan nganggo produk ieu.
- Ulah ngidinan barudak pikeun beroperasi produk ieu.
- Pastikeun catu daya cocog sareng voltage dieusian dina labél produk.
- Salawasna pegatkeun listrik sateuacan ngalayanan atanapi ngalaksanakeun pangropéa.
- Do not operate the pump if the suction or discharge lines are closed.
- Tetep sambungan listrik garing sarta jauh ti cai.
- Consult a qualified electrician for any electrical installations.
Eusi pakét
Please ensure all components are present and undamaged before beginning assembly.
- Tangki Saringan Keusik (19 inci)
- 1.5HP Swimming Pool Pump
- 5-Jalan Multi-Port klep
- Dasar saringan
- Gauge tekanan
- Hose Adapters and Clamps
- Drain Nozzle and Cap
- Internal Filter Assembly (pipe with laterals)
- Instruksi Manual

Image: All components of the XtremepowerUS Sand Filter and Pump System laid out on a wooden deck.
Parentah Majelis
1. Majelis Filter
- Install Drain Nozzle: Place the O-ring onto the long side of the filter drain nozzle. Apply plumber's tape to the threads. Carefully route the nozzle from inside the filter tank through the bottom drain hole. Secure it in place by screwing on the nut from the outside. Insert an O-ring into the drain hole nozzle cap and screw it onto the nozzle.
- Insert Internal Filter Assembly: Place the internal filter assembly (pipe with laterals) inside the filter tank. Position the funnel on top of the assembly, ensuring it is centered and correctly inserted.
- Fill with Filter Media: Fill the filter tank with either filter balls or sand, following the recommended guidelines for your specific media type. Remove the funnel after filling.
- Pasang Multi-Port Valve: Place the O-ring onto the multi-port valve. Position the valve on the upper part of the filter tank, ensuring the top of the internal filter assembly is properly inserted into the bottom of the valve. Ensure the valve's pump opening aligns with the pump mounting base and the waste opening is oriented away from the pump mounting base. Secure the valve in place with the locking rings, placing the square nut on one side of each ring and tightening.
- Pasang alat ukur tekanan: Remove the pressure gauge covering screw from the valve. Apply plumber's tape to the threads of the pressure gauge and screw it onto the valve.

Image: Close-up of the internal filter assembly (pipe with laterals) for the sand filter tank.

Image: Close-up of the 5-way multi-port valve with an integrated pressure gauge.

Gambar: Detil view of the pressure gauge, showing PSI and bar readings.
2. Pamasangan pompa
- Prepare Filter Base: Remove the filter from the filter and pump base. Flip the base over and press the nuts into the four designated nut spaces for securing the pump.
- Mount Pump: Place the pump on top of the base, aligning it with all four screw holes. Hand-tighten the screws lightly to prevent the nuts from being pushed out. Use a Phillips screwdriver to securely tighten the screws.
- Attach Hose Adapters to Pump: Place O-rings onto the pump's hose adapters and seal the threads with plumber's tape. Screw all hose adapters onto the pump.

Image: Close-up of the pump with its clear strainer lid, showing the internal basket.

Image: The pump's strainer basket removed, showing the fine mesh for debris collection.
3. Hose Installation
- Connect Pump to Filter Valve: Place the filter back onto the filter base. Attach hose clamps to the valve hose adapter marked "PUMP". Connect a hose between this adapter and the pump outlet. Tighten the hose clamps with a flathead screwdriver or ratchet and socket.
- Connect Filter Valve to Pool Return: Pasang selang clamp on the valve hose adapter marked "POOL". Connect the pool return line to this adapter. Tighten the hose clamp.
- Connect Pump Inlet to Pool Suction: Pasang selang clamp on the pump inlet hose adapter. Connect the pool suction line to the pump inlet. Tighten the hose clamp.

Image: The XtremepowerUS Sand Filter and Pump System fully assembled and connected to an above ground pool, ready for operation.
Parentah Operasi
Once the system is fully assembled and connected, ensure all connections are secure and leak-free. Connect the pump to a power source to begin operation.
Fungsi Klep Multi-Port:
The multi-port valve allows for various operational modes. Always turn off the pump before changing valve positions.
- FILTER: This is the standard operating mode for daily pool water filtration. Water is pumped from the pool, through the filter media, and returned to the pool.
- BACKWASH: Used to clean the filter media. Water flows in reverse through the filter, flushing trapped debris out through the waste port.
- Bilas: Used after backwashing to settle the filter media and flush any remaining debris from the valve before returning to FILTER mode.
- Runtah: Bypasses the filter and sends water directly out the waste port. Useful for quickly lowering the pool water level or vacuuming heavy debris directly to waste.
- RECIRCULATE: Ngaliwatan filter sareng ngalirkeun cai langsung ka kolam renang. Mangpaat pikeun nyampur bahan kimia tanpa kedah difilter.
- TUTUP: Shuts off all flow to the filter and pump. Use only when the pump is off and for servicing the pump or filter.
- Usum tiis: Position for winter storage, allowing water to drain quickly from the filter's drain hole to prevent freezing.
Video: Official XtremepowerUS video demonstrating the assembly, hose installation, and multi-port valve functions for the 19-inch sand filter and 1.5HP pool pump system.
Pangropéa
Ngabersihan rutin:
- Backwash: When the pressure gauge reading is 8-10 PSI above the clean filter pressure, it's time to backwash. Turn off the pump, set the valve to BACKWASH, turn on the pump, and run until the water from the waste port runs clear (typically 1-2 minutes).
- Bilas: After backwashing, turn off the pump, set the valve to RINSE, turn on the pump, and run for 30-60 seconds to settle the sand. Turn off the pump, then set the valve back to FILTER.
- Karanjang Saringan: Regularly check and clean the pump's strainer basket to prevent debris buildup and maintain optimal flow.
Winterization:
To prepare the system for winter storage and prevent damage from freezing:
- Cap all above-ground pool lines.
- Open the filter drain hole and set the multi-port valve to the WINTER position to allow water to drain from the filter.
- Unscrew the drain screw at the bottom of the pump to drain water from the pump.
- Disconnect all hoses from the filter and pump.
- Clean out the filter media from the filter tank if necessary, or follow manufacturer guidelines for your specific media.
- Store the pump and filter in a dry, frost-free location.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Pompa teu priming / Taya aliran cai | Low water level in pool, air leak in suction line, clogged strainer basket, closed valves. | Ensure adequate pool water level. Check all connections for air leaks. Clean strainer basket. Open all necessary valves. |
| Aliran cai lemah / filtrasi goréng | Clogged filter media, dirty strainer basket, air in system, restricted plumbing. | Backwash and rinse filter. Clean strainer basket. Bleed air from system. Check hoses for kinks or blockages. |
| Bacaan alat ukur tekanan tinggi | Dirty filter media, restricted return line. | Perform backwash and rinse cycle. Check return lines for obstructions. |
| Cai bocor tina sambungan | Sambungan leupas, O-ring/gasket ruksak. | Kencangkeun sadaya selang clamps and threaded connections. Inspect and replace any damaged O-rings or gaskets. |
spésifikasi
- merek: XtremepowerUS
- Jumlah modél: 75032
- Diaméter saringan: 19 inci
- Tenaga Pompa: 1.5 hp
- Laju Aliran Maksimum: 75 Galon Per Menit (4500 GPH)
- Voltage: 115 volt
- Sumber Daya: Kabel Listrik
- Beurat barang: 53 pon
- Ukuran produk: 21 "L x 25" W x 29" H
- Bahan: Metal, PE
- Gaya: Luhureun Taneuh
- UPC: 609456121798
Garansi sareng Rojongan
For warranty information, technical support, or replacement parts, please refer to the contact details provided with your purchase documentation or visit the official XtremepowerUS websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.





