Produk Leuwihview
The Bosch QuietCast Premium Semi-Metallic Disc Brake Pad Set (Model BP149) is engineered for optimal braking performance across a wide range of vehicles. These brake pads are designed to deliver OE quality performance, durability, and quiet operation with low dust. They feature advanced friction materials and innovative technologies to ensure reliable stopping power.
Fitur konci:
- OE Braking Excellence: Draws on over 77 years of Bosch's original equipment braking expertise.
- Quieter Stops: Equipped with pre-attached OE style multilayer rubber core shims for reduced noise, increased strength, and corrosion resistance.
- Exceptional Friction Material: Rigorously formulated Semi-Metallic friction material for robust performance, stopping power, and low dust.
- Bosch Durability: Powder-coated backing plate prevents rust and corrosion, extending product life. Features OE style slots and chamfers for premium quality, fit, and function.
- Siap Pasang: Each set includes pads for one axle (two wheels), a hardware kit (where applicable), and synthetic lubricant for reduced resistance on sliding contact points.
Image: Components of the Bosch QuietCast Premium Semi-Metallic Disc Brake Pad Set, showing four brake pads, two metal clips, and a packet of synthetic lubricant.
Image: Cross-section diagram of a Bosch QuietCast brake pad, detailing its layered construction with coating, steel, rubber, steel, and adhesive, which contributes to its quiet operation and durability through Molded Shim Technology.
Émbaran Kasalametan
Always prioritize safety when working on vehicle braking systems. Improper installation or maintenance can lead to serious injury or vehicle damage. If you are not confident in your ability to perform this installation, seek assistance from a qualified automotive technician.
- Anggo alat pelindung pribadi (PPE), kalebet kacamata sareng sarung tangan.
- Ensure the vehicle is securely supported on jack stands before beginning any work.
- Tingali kana manual servis kendaraan anjeun pikeun spésifikasi sareng prosedur torsi khusus.
- Jauhkeun cairan rem tina permukaan anu dicét, sabab tiasa ngarusak cét.
- Miceun komponén rem sareng cairan rem anu lami sacara tanggung jawab numutkeun peraturan lokal.
Guide instalasi
This section provides a general guide for installing the Bosch QuietCast Premium Semi-Metallic Disc Brake Pad Set. Specific steps may vary depending on your vehicle make and model. Always consult your vehicle's service manual for detailed instructions.
Alat sareng Bahan anu Dibutuhkeun:
- Jack jeung jack nangtung
- Lug wrench
- Socket set na ratchet
- C-clamp atawa alat kompresi piston kaliper rem
- Sikat kawat
- Beberesih rem
- rengkuh torsi
- New Bosch QuietCast Brake Pads (BP149)
- Synthetic lubricant (included with pads)
- Hardware kit (where applicable, included with pads)
Lengkah-demi-Lengkah Instalasi:
- Nyiapkeun Kendaraan: Park the vehicle on a level surface, engage the parking brake, and loosen the lug nuts on the wheels where brake pads will be replaced. Jack up the vehicle and secure it with jack stands. Remove the wheels.
- Cabut Bantalan Rem Lama: Locate the brake caliper. Depending on your vehicle, you may need to remove caliper guide pins or bolts to swing the caliper open or remove it entirely. Carefully remove the old brake pads. Note their orientation.
- Mariksa komponén: Inspect the brake rotors for excessive wear, scoring, or warping. If necessary, replace the rotors with new Bosch QuietCast Premium Disc Brake Rotors for optimal performance. Check caliper slides and boots for damage.
- Bersih sareng lubricate: Clean the caliper bracket and hardware mounting points with a wire brush and brake cleaner. Apply the provided synthetic lubricant to the caliper slide pins and any metal-to-metal contact points on the new hardware (if included).
- Compress Caliper Piston: Paké C-clamp or a brake caliper piston compression tool to slowly push the caliper piston(s) back into the caliper bore. This creates space for the thicker new brake pads.
- Pasang Bantalan Rem Anyar: Install the new Bosch QuietCast brake pads into the caliper bracket, ensuring they are correctly seated. If a new hardware kit is included, install the new clips and shims.
- Pasang deui Caliper: Reinstall the brake caliper over the new pads and rotor. Secure the caliper guide pins or bolts and tighten them to the manufacturer's specified torque.
- Léngkah ahir: Reinstall the wheels and tighten the lug nuts hand-tight. Lower the vehicle and torque the lug nuts to the manufacturer's specifications. Repeat the process for the other wheels.
Video: Hiji leuwihview of Bosch QuietCast Premium Disc Brake Pads and Rotors, highlighting key features and benefits. This video provides general product information and does not replace specific vehicle installation instructions.
Parentah Operasi
Brake Pad Break-In Procedure (Bedding-In):
After installing new brake pads, it is crucial to follow a proper break-in procedure to ensure optimal performance and longevity. This process, known as "bedding-in," transfers a thin layer of friction material from the pads to the rotor surface, creating a more consistent braking surface.
- Milarian tempat anu aman sareng kabuka kalayan lalu lintas minimal.
- Akselerasi kira-kira 35 mph (56 km/h) jeung tekenan ngerem sedeng pikeun ngalambatkeun ka 5 mph (8 km/h). Ulah datang ka eureun lengkep.
- Repeat this moderate braking procedure 4-5 times, allowing a short period between each stop for the brakes to cool slightly.
- Next, accelerate to approximately 50 mph (80 km/h) and apply firm braking pressure (but not hard enough to activate ABS) to slow down to about 5 mph (8 km/h). Do not come to a complete stop.
- Repeat this firm braking procedure 2-3 times, allowing a short period between each stop for the brakes to cool slightly.
- After the bedding-in process, drive normally for at least 200 miles (320 km), avoiding sudden or aggressive braking.
During the break-in period, you may notice a slight burning smell or reduced braking effectiveness. This is normal. Avoid heavy braking or prolonged stops immediately after installation.
Pangropéa
Regular inspection and maintenance of your braking system are essential for safety and performance.
- Inspeksi rutin: Inspect brake pads, rotors, and calipers at least once a year or every 12,000 miles (20,000 km), whichever comes first. Look for signs of wear, cracks, or damage.
- Pad rem maké: Replace brake pads when the friction material wears down to the minimum thickness specified by your vehicle manufacturer, typically around 2-3mm. Bosch QuietCast pads are designed for long life, but wear rates can vary based on driving conditions.
- Cairan rem: Check brake fluid level and condition regularly. Consult your vehicle manual for recommended brake fluid replacement intervals.
- Kaayaan rotor: Ensure rotors are free from deep grooves, excessive rust, or warping. Replace rotors if they are below minimum thickness or show significant damage.
Pamérésan masalah
| Gejala | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Squealing / grinding Noise | New pads not properly bedded-in, worn pads (wear indicator), foreign object, caliper issues. | Perform break-in procedure. Inspect pads for wear and replace if necessary. Check for debris. Inspect calipers for proper function. |
| Geter / Pulsation salila ngerem | Rotor bengkok, bantalan nu teu rata, bantalan roda kendor. | Inspect and replace rotors if warped. Check for proper pad installation. Inspect wheel bearings. |
| Pedal marake lemes | Air in the brake lines, low brake fluid, faulty master cylinder. | Bleed the brake system. Check and top up brake fluid. Inspect master cylinder. |
| Kandaraan Narik ka Hiji Sisi | Uneven brake pad wear, seized caliper, contaminated brake fluid. | Inspect pads and calipers. Flush and replace brake fluid. |
If you experience any persistent braking issues, it is recommended to have your vehicle inspected by a professional mechanic immediately.
spésifikasi
| Atribut | Rincian |
|---|---|
| merek | Bosch |
| Nomer modél | BP149 |
| Bahan | Semi-Metallic |
| Posisi Bagian Otomatis | Front, Rear (Note: Verify specific fitment for your vehicle) |
| Jinis Layanan Kandaraan | Otomotif |
| Spesifikasi Met | OEM |
| Item Beurat | 3.9 pon |
| Dimensi produk | 8.25 x 5.25 x 3.25 inci |
| UPC | 031808169217, 077212101467 |
Garansi sareng Rojongan
Bosch products are manufactured to high-quality standards. For specific warranty information regarding your Bosch QuietCast Premium Semi-Metallic Disc Brake Pad Set, please refer to the documentation included with your product or visit the official Bosch Automotive website. For technical support or inquiries, please contact Bosch customer service.
Otomotif Bosch Websitus: www.boschautoparts.com
