1. Bubuka
Thank you for choosing the GBC Fusion 1100L Thermal Laminator. This machine is designed to protect and preserve your important documents, photos, and creative projects with ease and efficiency. Ideal for small offices, schools, or home use, it offers both hot and cold lamination capabilities. Please read this manual thoroughly before operating the laminator to ensure safe and optimal performance.
Gambar 1: Hareupeun view of the GBC Fusion 1100L Thermal Laminator.
2. Émbaran Kasalametan
Salawasna turutan pancegahan kaamanan dasar nalika nganggo alat listrik ieu pikeun ngirangan résiko kahuruan, kejutan listrik, atanapi tatu.
- Do not operate the laminator if the power cord or plug is damaged.
- Keep the laminator away from water or other liquids.
- Pastikeun ventilasi anu cekap di sakitar mesin nalika dioperasikeun.
- Do not touch the laminator's exit area immediately after use, as it may be hot.
- Cabut laminator nalika henteu dianggo atanapi sateuacan beberesih.
- Jauhkeun tina jangkauan barudak.
3. Setélan
- Ngabongkar bungkusan: Carefully remove the laminator from its packaging. Retain packaging for future storage or transport.
- panempatan: Place the laminator on a stable, flat surface with adequate space for documents to feed through and exit. Ensure there is sufficient ventilation around the machine.
- Sambungan Daya: Colokkeun kabel listrik kana stop kontak listrik standar.
- Pemanasan Awal: Turn on the laminator. The machine will begin its warm-up cycle, which typically takes about 4 minutes. The green "Ready" light will illuminate when the laminator has reached the optimal operating temperature.
4. Parentah Operasi
4.1. Hot Lamination
- Hurungkeun sareng Panaskeun: Turn on the laminator and wait for the green "Ready" light to illuminate (approximately 4 minutes).
- Pilih Kandel Kantong: Use the slider switch on the control panel to select the appropriate pouch thickness: 3 mil or 5 mil.
- Nyiapkeun Dokumén: Place your document inside a laminating pouch, ensuring it is centered and aligned with the sealed edge of the pouch.
- Kantong Lebetkeun: Feed the sealed edge of the pouch into the laminator's entry slot. The machine will automatically pull the pouch through.
- Candak Dokumén Laminasi: Once the pouch exits the machine, allow it to cool on a flat surface before handling.
Figure 2: Inserting a document into the laminator for hot lamination.
4.2. Cold Lamination
The GBC Fusion 1100L also supports cold lamination for heat-sensitive materials.
- Select Cold Setting: Move the slider switch on the control panel to the "Cold" setting.
- Nyiapkeun Dokumén: Use pressure-sensitive adhesive pouches (e.g., GBC SelfSeal pouches, sold separately) and place your document inside.
- Kantong Lebetkeun: Feed the sealed edge of the cold laminating pouch into the laminator's entry slot. The machine will apply pressure to seal the pouch.
- Candak Dokumén Laminasi: Remove the laminated document once it has passed through the machine.
4.3. Jam Release Feature
In the event of a misfed or jammed pouch, press and hold the "Release" button located on the control panel. This will disengage the rollers, allowing you to carefully pull the pouch out. Release the button once the pouch is clear.
Figure 3: Key features including the Jam Release button and 9-inch laminating width.
5. Pangropéa
- Rollers beberesih: To maintain optimal performance and prevent adhesive buildup, regularly run a laminator cleaning sheet through the machine. This should be done after every few uses or if you notice any residue on your laminated documents.
- Bersihan Luar: Wipe the exterior of the laminator with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Panyimpenan: When not in use, store the laminator in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Laminator teu hurung. | Teu aya listrik, saklarna pareum. | Check power cord connection. Ensure power switch is in the "On" position. |
| Pouch is jammed. | Misfed pouch, incorrect pouch size. | Press and hold the "Release" button to clear the jam. Ensure pouches are fed straight and are within the 9-inch width limit. |
| Laminated document has wrinkles or bubbles. | Pouch not fed straight, incorrect temperature setting, old pouches. | Ensure pouch is fed straight. Verify correct mil setting. Use fresh, high-quality laminating pouches. |
| Laminator not warming up. | Gangguan internal. | Allow sufficient warm-up time (4 minutes). If problem persists, contact customer support. |
7. Spésifikasi
- merek: GBC
- model: Fusion 1100L (1703074)
- Laminating Width: 9 inci
- Pouch Thickness Compatibility: 3 mil, 5 mil
- Waktos pemanasan: Kurang leuwih 4 menit
- Laminating Speed: 13 inches per minute (approx. 10 documents in 10 minutes)
- Laminasi tiis: Sumuhun
- Pareuman-otomatis: Sumuhun
- Beurat barang: 3 pon
- Ukuran produk: 16.38 x 5.28 x 4.17 inci
Figure 4: The GBC Fusion 1100L comes with a 3-year warranty and includes 10 EZUse pouches.
8. Garansi jeung Rojongan
The GBC Fusion 1100L Thermal Laminator comes with a 3-taun jaminan kawates. Garansi ieu nyertakeun cacad dina bahan sareng pagawean dina panggunaan normal. Punten tahan bukti pameseran anjeun pikeun klaim garansi.
Asesoris kaasup: Your laminator package includes 10 letter size EZUse Laminating Pouches, designed for easy loading and document alignment.
Figure 5: Included GBC EZUse 10 Pack laminating pouches.
For technical support, troubleshooting assistance, or warranty inquiries, please refer to the official GBC websitus atanapi ngahubungan departemén layanan palanggan maranéhna.
