LD Systems LDWSECO2X2R2 Double Receiver User Manual

Bubuka

Thank you for choosing the LD Systems LDWSECO2X2R2 Double Receiver. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.

Parentah Kasalametan penting

• Baca parentah ieu: Sadaya parentah kaamanan sareng operasi kedah dibaca sateuacan produk dioperasikeun.
• Keep these instructions: Parentah kaamanan sareng operasi kedah dipikagaduh pikeun rujukan ka hareup.
• Perhatoskeun sadaya peringatan: Sadaya peringatan ngeunaan produk sareng petunjuk operasi kedah dipatuhi.
• Nuturkeun sagala parentah: Kabéh parentah operasi sarta pamakéan kudu dituturkeun.
• Entong nganggo alat ieu caket cai: Ulah make produk ieu deukeut cai atawa Uap.
• Clean only with dry cloth: Cabut colokan produk ieu tina stop kontak sateuacan beberesih.
• Ventilasi: Ulah meungpeuk sagala bukaan ventilasi. Pasang saluyu sareng parentah produsén.
• Sumber Daya: Operasikeun produk ieu ngan ukur tina jinis sumber daya anu dituduhkeun dina labél panyirian.
• Palayanan: Ulah nyobian ngalayanan produk ieu sorangan sabab muka atawa nyoplokkeun panutup bisa ngalaan anjeun vol bahayatage atawa bahya séjén. Rujuk sadayana jasa ka tanaga jasa anu mumpuni.

Eusi pakét

Mangga parios heula sadaya barang anu didaptarkeun di handap ieu kalebet kana pakét anjeun:

• LD Systems LDWSECO2X2R2 Double Receiver Unit
• Power Adapter (12-18V DC, 300mA)
• Manual pangguna (dokumén ieu)
• Antennas (quantity may vary based on model variant)

Produk Leuwihview

The LD Systems LDWSECO2X2R2 is a double receiver designed for wireless audio transmission. It operates on frequencies 863.900 MHz and 864.900 MHz, providing reliable signal reception for professional audio applications.

Gambar: Hareupeun view of the LD Systems LDWSECO2X2R2 Double Receiver, showing controls and display.

Kontrol Panel hareup:

• Tombol Daya: Ngahurungkeun atanapi mareuman unit.
• Pintonan saluran: Shows the currently selected channel for each receiver.
• Kontrol Volume: Independent volume adjustment for each receiver channel.
• RF/AF Indicators: LEDs indicating RF signal presence and AF audio level.

Sambungan Panel Belakang:

• Input anteneu: Sambungkeun anteneu anu disayogikeun.
• Balanced XLR Outputs: For connecting to professional audio mixers or amplifsters.
• Unbalanced 1/4" Jack Outputs: Alternative audio output connections.
• Input Daya DC: Sambungkeun adaptor daya anu disayogikeun.

Guide Setup

Follow these steps to set up your LD Systems LDWSECO2X2R2 Double Receiver:

1. Bongkarkeun Panampi: Sacara saksama miceun sadaya komponén tina bungkusan.
2. Sambungkeun Antenna: Screw the supplied antennas onto the antenna inputs located on the rear panel. Ensure they are securely fastened.
3. Posisikeun Panampi: Place the receiver in a stable location, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure good line-of-sight to the intended transmitter.
4. Sambungkeun Kaluaran Audio:
   • For balanced connections, use XLR cables to connect the receiver's XLR outputs to your mixer or amppangagung.
   • For unbalanced connections, use 1/4" jack cables to connect the receiver's 1/4" outputs to your audio equipment.
5. Sambungkeun Kakuatan: Connect the provided DC power adapter to the receiver's DC power input. Plug the adapter into a suitable power outlet.
6. Daya Hurung: Press the power button on the front panel to turn on the receiver. The display should illuminate.
7. Pair with Transmitters: Refer to your transmitter's manual for instructions on how to pair it with the receiver. Ensure the transmitter and receiver are set to the same frequency/channel.

Parentah Operasi

1. Daya Hurung: Ensure both the receiver and your wireless transmitters are powered on.
2. Pariksa Sinyal: Observe the RF (Radio Frequency) indicator on the receiver. It should illuminate steadily when a signal from the paired transmitter is detected.
3. Saluyukeun Volume: Use the independent volume controls on the front panel to set the desired audio output level for each channel. Start with a low volume and gradually increase it to avoid sudden loud sounds.
4. Monitor Audio: The AF (Audio Frequency) indicator will light up when audio is being received. Ensure your audio equipment (mixer, amplifier) is also properly configured to receive the signal.
5. Channel Selection (if applicable): If your model supports manual channel selection, refer to the specific instructions for changing frequencies to avoid interference. The LDWSECO2X2R2 operates on fixed frequencies 863.900 MHz and 864.900 MHz.
6. Pareum listrik: When finished, power off your transmitters first, then power off the receiver.

Pangropéa

• beberesih: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the receiver. Do not use liquid cleaners or aerosol sprays.
• Panyimpenan: Upami henteu dianggo salami lami, simpen panarima di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Anteneu: Ensure antennas are not bent or damaged. Replace if necessary to maintain optimal signal reception.
• adaptor kakuatan: Regularly inspect the power adapter and cable for any signs of damage. Do not use a damaged adapter.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

LD Systems products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official LD Systems website. For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your local dealer or the LD Systems customer service department.

Catetan: Inpormasi ngeunaan kasadiaan suku cadang henteu disayogikeun dina rincian produk.