Manual+

DeVilbiss HAV-501

DeVilbiss HAV-501 High Output Air Adjusting Valve with Gauge

Manual pamaké

1. Bubuka

This manual provides essential information for the safe and effective use of your DeVilbiss HAV-501 High Output Air Adjusting Valve with Gauge. Please read these instructions carefully before installation, operation, or maintenance. Keep this manual for future reference.

2. Émbaran Kasalametan

PERHATOSAN: Gagal nuturkeun parentah kaamanan ieu bisa ngakibatkeun tatu serius atawa karuksakan harta.

  • Always wear appropriate personal protective equipment (PPE), including eye protection, when working with compressed air systems.
  • Ensure the air supply is turned off and pressure is relieved before connecting, disconnecting, or servicing the valve.
  • Do not exceed the maximum rated inlet pressure of 160 PSI.
  • Paké ngan bersih, garing, hawa dikomprés diatur.
  • Inspect the valve and all connections regularly for damage or leaks. Replace damaged components immediately.
  • Jauhkeun barudak sareng tanaga anu henteu sah ti daérah padamelan.

3. Produk Langkungview

The DeVilbiss HAV-501 is a high-output air adjusting valve designed to provide precise air pressure control for professional spray guns. It features an integrated gauge for accurate pressure monitoring.

DeVilbiss HAV-501 High Output Air Adjusting Valve with Gauge

Figure 1: DeVilbiss HAV-501 High Output Air Adjusting Valve with Gauge. This image shows the compact design of the valve, featuring a clear pressure gauge, an air inlet connection, and an air outlet connection.

Komponén konci:

  • Gauge tekanan: Displays the regulated air pressure.
  • kenop adjustment: Used to increase or decrease the regulated air pressure.
  • Air Inlet (¼ NPS (M)): Connects to the air supply hose.
  • Air Outlet (¼ NPS (F)): Connects to the spray gun.

4. Setélan

  1. Ensure your air compressor is off and the air line is depressurized.
  2. Thread the male ¼ NPS inlet of the HAV-501 valve into your air supply hose. Use thread sealant tape (PTFE tape) for a secure, airtight connection.
  3. Thread your professional spray gun onto the female ¼ NPS outlet of the HAV-501 valve. Again, use thread sealant tape for a proper seal.
  4. Pastikeun sadaya sambungan kedap tapi ulah overighten.
  5. Slowly turn on the air supply to the hose.

5. Parentah Operasi

  1. With the air supply on, observe the pressure gauge on the HAV-501 valve.
  2. To adjust the air pressure, turn the adjustment knob.
    • Turn clockwise to increase the regulated pressure.
    • Turn counter-clockwise to decrease the regulated pressure.
  3. Adjust the pressure to the recommended setting for your specific spray gun and material.
  4. Always check the pressure reading on the gauge before beginning your spraying task.

6. Pangropéa

Regular maintenance ensures optimal performance and extends the life of your HAV-501 valve.

  • beberesih: Wipe the exterior of the valve and gauge with a clean, damp cloth. Do not use harsh solvents or abrasive cleaners.
  • Pamariksaan: Periodically inspect the valve body, gauge, and connections for any signs of damage, cracks, or leaks.
  • Panyimpenan: When not in use, store the valve in a clean, dry environment, away from extreme temperatures and direct sunlight.

7. Cara ngungkulan

Masalah umum:

  • Teu Aya Aliran Udara:
    • Check if the air supply is turned on.
    • Ensure all connections are secure and not blocked.
    • Verify the adjustment knob is not turned completely off (fully counter-clockwise).
  • Bacaan Tekanan Anu Teu Akurat:
    • Ensure the gauge is not damaged.
    • Compare with another known accurate pressure gauge if available.
  • bocor hawa:
    • Check all threaded connections for proper sealing with PTFE tape.
    • Pariksa awak klep pikeun ayana retakan atanapi karusakan.

If you encounter issues not listed here or cannot resolve a problem, contact DeVilbiss customer support.

8. Spésifikasi

  • model: HAV-501
  • Kasaluyuan: Fits any professional spray gun
  • Max. Tekanan Inlet: 160 PSI
  • Max. Regulated Pressure: 0-160 ​​PSI
  • Inlet Udara: ¼ NPS (M)
  • Outlet hawa: ¼ NPS (F)

9. Garansi jeung Rojongan

For warranty information or technical support, please refer to the official DeVilbiss websitus atanapi ngahubungan departemén layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun salaku bukti pameseran.