Buku Panduan Scanner OBD2 LAUNCH Creader VII+ V2.0

1. Produk Langkungview

The LAUNCH Creader VII+ V2.0 is an advanced OBD2 diagnostic scan tool designed to provide comprehensive vehicle system analysis. It features a 3.5-inch TFT color display for clear readability and supports various diagnostic functions across multiple vehicle systems.

Figure 1: LAUNCH Creader VII+ V2.0 Main Unit

Komponén Alat

• Indikator kakuatan: Nyaangan nalika alat dihurungkeun.
• Indikator Komunikasi: Illuminates when the device is communicating with the vehicle.
• Layar LCD: 3.5-inch TFT color screen for displaying information.
• Tombol OK: Konfirmasi pilihan.
• Tombol ESC: Exits current menu or cancels operation.
• Tombol DTC: Accesses the Diagnostic Trouble Code (DTC) library.
• Port USB: Pikeun nyambungkeun ka komputer pikeun apdet atanapi transfer data.
• Slot Kartu TF: For inserting the TF card, primarily used for software updates.

2. Naon dina Box

Pastikeun yén sadaya item aya dina bungkusan:

• 1pc x Launch Creader VII+ V2.0 Main Unit
• 1pc x OBDII Cable
• 1pc x Kabel USB
• 1pc x Card Reader
• 1 pc x Buku Panduan

Gambar 2: Eusi pakét

3. Setélan

3.1 Mimiti Power-Up

1. Connect the OBDII cable to the Creader VII+ V2.0 unit.
2. Locate the OBDII port in your vehicle (usually under the dashboard).
3. Plug the OBDII connector into the vehicle's port. The device will power on automatically.
4. Follow the on-screen prompts to select your preferred language. The device supports English, Spanish, French, German, Italian, Chinese, Polish, and more.

3.2 Software Update (Recommended)

To ensure optimal performance and access to the latest vehicle data, it is recommended to update the device software. There are two methods: via TF card (recommended) or via USB cable.

1. Before starting, connect the device to a computer via its USB cable.
2. On the device, navigate to "Help" -> "Tool Information" -> "Register Code" (password) and record the displayed information.
3. Nganjang ka LAUNCH resmi website (as indicated in the device's boot screen or manual) and download the "Updating Tool".
4. Install the updating tool on your computer.
5. Open the installed client software.
6. Insert the TF card into its reader, then connect the TF card reader to your PC.
7. In the software, type in the "Serial Number" (found on the back of the device) and the "Register Code" (password) obtained in step 2.
8. Select the desired software updates and click "Download".
9. Once complete, reinsert the TF card into the tool. The tool will prompt you to upgrade; select OK to proceed.

4. Parentah Operasi

4.1 Nyambungkeun ka Kandaraan

Ensure the vehicle's ignition is in the ON position (engine off or running, depending on the test). Connect the Creader VII+ V2.0 to the vehicle's 16-pin OBDII port.

4.2 System Diagnostics (ENG/AT/ABS/SRS)

The Creader VII+ V2.0 can access and diagnose four main vehicle systems: Engine, Transmission (AT), Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS).

Figure 3: Four System Diagnostics Capability

• Baca Konci: Retrieve Diagnostic Trouble Codes (DTCs) from the selected system.
• Hapus Kodeu: Erase DTCs from the system after repairs are made, turning off warning lights.
• View Aliran Data Langsung: Display real-time sensor data in text or graphic format.
• Read Version Info: Access ECU information.

4.3 Full OBDII Test Modes

The device supports all 10 OBDII test modes, allowing for comprehensive emissions-related diagnostics.

Gambar 4: Fungsi OBDII Lengkep

• Baca & Hapus DTCs: Retrieve and erase generic (P0, P2, P3, U0) and manufacturer-specific (P1, U1) codes.
• Aliran Data Langsung: View real-time data parameters.
• Freeze Data Frame: View snapshot tina nilai sensor nalika DTC disetel.
• Status Kesiapan I/M: Pariksa status monitor anu aya patalina sareng émisi.
• Tés Sénsor O2: Candak hasil tés monitor sénsor O2.
• Tes Monitor On-Board: Retrieve results for emission-related powertrain components.
• Uji Sistem EVAP: Initiate a test of the evaporative emission system.
• Tés komponén: Initiate a leak test for the EVAP system.
• Émbaran Kandaraan: Retrieve VIN, Cal ID, CVN.

4.4 Reset Fungsi

The V2.0 model includes three updated reset functions for common maintenance tasks:

Figure 5: New Reset Functions

• Reset minyak: Resets the oil life indicator after vehicle maintenance.
• Throttle Adaption (ETS Reset): Helps update firmware or reconfigure to match new vehicle settings for the electronic throttle system.
• SAS Relearn (Steering Angle Sensor Reset): Addresses issues related to the vehicle's service and safety systems, particularly the steering angle sensor.

4.5 Live Data Stream Display

The device can display live vehicle sensor data in text and multiple graph formats, allowing for intuitive viewing of dynamic data and identification of problems. It can show up to 4 live data streams simultaneously.

Figure 6: Multiple Live Data Streams

4.6 DTC Library & Data Management

• Perpustakaan DTC: A built-in library allows you to look up fault codes and view probable causes, aiding in quicker and more accurate fault location.
• Rékaman Data sareng Putereun: The device automatically records diagnostic information, which can be reviewed iraha wae.
• PC Print: Diagnostic reports can be printed after connecting the device to a PC.

Figure 7: Additional Features

5. Kasaluyuan Kandaraan

The LAUNCH Creader VII+ V2.0 is compatible with over 10,000 vehicles, including 12V diesel cars, from various brands across America, Europe, and Asia. It supports vehicles from 1996 onwards that comply with the OBDII standard.

Figure 8: Wide Vehicle Coverage

Supported brands include, but are not limited to: Ford, GM, Chrysler, Nissan, Toyota, BMW, Benz, etc.

6. Spésifikasi

7. Cara ngungkulan

If you encounter issues, refer to the following general troubleshooting steps:

• Henteu aya kakuatan: Ensure the OBDII cable is securely connected to both the device and the vehicle's OBDII port. Check the vehicle's battery status.
• Kasalahan Komunikasi: Verify the vehicle's ignition is ON. Ensure the OBDII cable is not damaged. Try connecting to a different compatible vehicle to rule out device issues.
• Bacaan anu salah: Ensure the device software is up-to-date. Verify the vehicle information (VIN) is correctly recognized.
• Masalah Pembaruan: Double-check all steps in the software update section. Ensure a stable internet connection and that the TF card is properly inserted into the card reader.

8. Garansi jeung Rojongan

The LAUNCH Creader VII+ V2.0 scan tool includes lifetime online updates at no additional fee and 5 years of quality care.

For any questions or support, please contact LAUNCH customer service. You can find contact information on the official LAUNCH website or refer to the legal disclaimer provided with your product.

Rojongan Palanggan: 1-888-756-2936 (Sen-Jum 9:00–6:00 EST)