TROTEC TA300 Anemometer User Manual

1. Bubuka

The TROTEC TA300 is a professional hot-wire anemometer designed for precise measurement of air velocity, air temperature, and volumetric flow. Its practical telescopic probe allows for versatile applications, including measurements in ducts and hard-to-reach areas. This instrument combines a robust thermal wire sensor with advanced microprocessor technology to ensure fast and accurate results.

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your TA300 anemometer. Please read it thoroughly before using the device.

Image 1: TROTEC TA300 Anemometer main unit and telescopic probe. The display shows 'VEL 3.11 m/s' and 'TEMP 22.2 °C'.

2. Émbaran Kasalametan

Salawasna perhatikeun tindakan pencegahan kaamanan ieu pikeun nyegah tatu sareng karusakan kana alat:

• Baca sakabéh manual saméméh operasi.
• Ulah ngoperasikeun alat ieu dina atmosfir anu gampang ngabeledug atanapi caket bahan anu gampang kaduruk.
• Hindarkeun ngalaan alat ka suhu anu ekstrim, sinar panonpoé langsung, atanapi kalembaban anu luhur.
• Do not attempt to modify or disassemble the device. Repairs should only be performed by authorized personnel.
• Jauhkeun alat tina jangkauan barudak.
• Ensure the telescopic probe is handled with care to prevent bending or damage to the sensor.

3. Eusi Paket

Pastikeun yén sadaya barang aya sareng henteu ruksak nalika ngabongkar:

• TROTEC TA300 Anemometer
• Telescopic hot-wire probe
• Sertipikat kalibrasi
• Manual pangguna (dokumén ieu)
• Carrying case (if included with your model)

4. Fitur Produk

The TROTEC TA300 Anemometer offers the following key features:

• Pangukuran anu akurat: Accurately determines air velocity, air temperature, and volumetric flow.
• Telescopic Probe: Extendable up to 1 meter for measurements in ducts and hard-to-reach locations.
• Robust Sensor: Equipped with a durable thermal wire sensor.
• Mikroprosesor Canggih: Ensures fast and precise signal processing.
• Tampilan LCD Backlit: Easy readability even in poorly lit environments.
• Fungsi Data Tahan: Freezes the current measurement value on the display.
• Min/Max Value Indication: Displays minimum and maximum recorded values.
• Average Value Calculation: Calculates spot and time-averaged values.
• Volumetric Flow Area Input: Easily specify the cross-sectional area for volumetric flow calculations.
• Otomatis Pareum: Conserves hirup batré.
• Sertipikat Kalibrasi: Included as standard for professional assurance.

Gambar 2: Detil view of the TA300 control buttons and LCD display.

5. Setélan

5.1. Pamasangan batré

The TA300 anemometer typically uses a 9V block battery. To install or replace the battery:

1. Panggihan panutup kompartemen batré di bagian tukang alat.
2. Open the cover by sliding or unscrewing it (refer to the diagram if available).
3. Pasangkeun batré 9V anyar, pastikeun polaritasna bener.
4. Tutup panutup kompartemen batré aman.

Gambar 3: Luhur-handap view of the TA300, illustrating the main unit and probe connection area.

5.2. Attaching the Probe

The telescopic hot-wire probe connects to the main unit via a cable.

1. Carefully insert the probe's connector into the designated port on the main unit.
2. Ensure the connection is firm to prevent signal loss during measurement.

5.3. Daya Awal Hurung

Pencét tombol kakuatan (⑂) to turn on the device. The display will illuminate, and the device will perform a self-test before showing measurement readings.

6. Parentah Operasi

6.1. Extending the Telescopic Probe

The probe can be extended up to 1 meter for reaching measurement points.

1. Gently pull the probe tip to extend it to the desired length.
2. Hindarkeun kakuatan kaleuleuwihan pikeun nyegah karuksakan.
3. Ensure the probe is fully retracted when not in use to protect the sensor.

Image 4: Extended telescopic probe tip with hot-wire sensor.

6.2. Modeu pangukuran

The TA300 can measure air velocity, temperature, and volumetric flow.

• Air Velocity (VEL): The primary measurement displayed in m/s, ft/min, km/h, or mph.
• Suhu (TEMP): Measured simultaneously with air velocity, displayed in °C or °F.
• Volumetric Flow (FLOW): Calculated based on air velocity and a user-defined cross-sectional area.

6.3. Ngarobah Unit

Pencét "Unit" button to cycle through available measurement units for velocity and temperature.

6.4. Setting Volumetric Flow Area

To measure volumetric flow, you must input the cross-sectional area of the duct or opening:

1. Pencét "FLOW/TEMP" button to switch to volumetric flow mode.
2. Ngagunakeun "DISETÉL" button to enter the area setting menu.
3. Adjust the area value using the arrow buttons and confirm with "Lebetkeun".

6.5. Using Hold, Min/Max, and Mean Functions

• Tahan: Pencét "TAHAN/NOL" to freeze the current display reading. Press again to release.
• Min/Max: Pencét "MAX/MIN" to view the minimum or maximum recorded values during a measurement session.
• hartosna: Pencét "HARTA" to calculate and display the average value over a period or series of spot measurements.

7. Pangropéa

7.1. beberesih

Jaga alat tetep bersih pikeun mastikeun kinerja anu optimal.

• Ngusap unit utama kalayan lemes, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
• The hot-wire sensor on the probe is delicate. Clean it only with a soft brush or compressed air, if absolutely necessary, and with extreme care. Avoid touching the sensor directly.

7.2. Panyimpenan

When not in use, store the TA300 in its protective carrying case in a dry, dust-free environment, away from extreme temperatures.

• Ensure the telescopic probe is fully retracted before storage.
• Cabut batré upami alatna moal dianggo kanggo waktos anu panjang pikeun nyegah bocor.

7.3. Kalibrasi

The TA300 comes with a factory calibration certificate. For continued accuracy, periodic recalibration by an authorized service center is recommended, especially for professional applications.

8. Cara ngungkulan

If you encounter issues with your TROTEC TA300, refer to the following table:

If the problem persists after attempting these solutions, please contact TROTEC customer support.

9. Spésifikasi

Technical data for the TROTEC TA300 Anemometer:

10. Garansi jeung Rojongan

10.1. Émbaran jaminan

The TROTEC TA300 Anemometer is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official TROTEC websitus kanggo syarat sareng katangtuan anu lengkep. Simpen bukti pameseran anjeun kanggo klaim garansi.

10.2. Rojongan Palanggan

For technical assistance, service, or spare parts, please contact TROTEC customer support:

• Websitus: www.trotec.com (Pariksa inpormasi kontak lokal)
• Surélék: Rujuk kana website for specific contact forms or email addresses.
• Telepon: Rujuk kana websitus pikeun nomer telepon régional.

When contacting support, please have your model number (TA300) and serial number (if applicable) ready.