1. Bubuka
This instruction manual provides essential information for the safe and efficient operation, setup, and maintenance of your Antari HZ-500 Haze Machine. Please read this manual thoroughly before operating the unit to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
2. Émbaran Kasalametan
Adherence to the following safety precautions is crucial for preventing electrical shock, fire, or personal injury.
- Kasalametan listrik: Ensure the unit is connected to a grounded power outlet with the correct voltage as specified on the product label. Disconnect power before performing any maintenance or refilling fluid.
- Pamakéan Cairan: Use only Antari HZ-500 series haze fluid. Using other fluids may damage the machine and void the warranty. Do not ingest haze fluid. Keep out of reach of children.
- panempatan: Position the machine on a stable, level surface. Ensure adequate ventilation around the unit. Do not block air vents. Maintain a safe distance from flammable materials.
- Operasi: Do not operate the machine if it is damaged or malfunctioning. Avoid direct exposure to the haze output at close range. Do not modify the unit.
- Suhu: The machine generates heat during operation. Avoid touching hot surfaces.
3. Eusi Paket
Pastikeun yén sadaya item aya dina bungkusan:
- Antari HZ-500 Mesin Halimun
- Kabel listrik
- Manual pangguna (dokumén ieu)
- (Optional) Remote Control or DMX Cable (if purchased separately or included in specific bundles)
4. Produk Langkungview
The Antari HZ-500 is a professional haze machine designed for continuous output and quiet operation. It features a durable flight case design for portability and protection.
Gambar 4.1: Antari HZ-500 Haze Machine with its flight case lid open, revealing the main unit and control panel. The robust construction is visible, designed for touring and professional use.
4.1 Komponén konci
- Haze Output Nozzle: Located on the top surface, where haze is emitted.
- Reservoir Cairan: Internal compartment for haze fluid.
- Fluid Level Indicator: A clear window to monitor fluid levels.
- Panél kontrol: Features a digital display and buttons for settings adjustment.
- Input kakuatan: IEC connector for the power cord.
- DMX In/Out: XLR connectors for DMX control.
- Port kadali jauh: Pikeun nyambungkeun remot kabel opsional.
5. Setélan
5.1 Ngabongkar sareng Nempatkeun
- Carefully remove the HZ-500 from its packaging.
- Place the machine on a flat, stable, and heat-resistant surface.
- Ensure there is at least 50 cm (20 inches) of clear space around the unit for proper ventilation.
- Open the flight case lid to access the machine's controls and fluid reservoir.
5.2 Filling the Fluid Reservoir
- Locate the fluid reservoir cap on the top of the unit.
- Unscrew the cap and carefully pour Antari HZ-500 series haze fluid into the reservoir.
- Monitor the fluid level using the transparent indicator. Do not overfill. The maximum fluid level is clearly marked.
- Securely replace the reservoir cap.
Gambar 5.1: Detail of the fluid level indicator on the Antari HZ-500, showing the 'MAX FLUID LEVEL' mark and a 'Never Overfill' warning. This helps users prevent spillage and ensure correct operation.
5.3 Sambungan Daya
- Connect the provided power cord to the power input socket on the rear of the HZ-500.
- Plug the other end of the power cord into a suitable grounded electrical outlet.
- Ensure the power switch is in the OFF position before connecting to power.
5.4 Control Connection (Optional)
- Kontrol DMX: Connect a DMX cable from your DMX controller to the DMX IN port on the HZ-500. If linking multiple DMX devices, connect from DMX OUT to the next device's DMX IN.
- Jauh kabel: Connect the optional wired remote control to the designated remote control port.
6. Parentah Operasi
6.1 Ngahurungkeun sareng Ngamanaskeun
- Flip switch kakuatan ka posisi ON.
- The machine will begin its warm-up cycle. The digital display will indicate the status.
- Once warmed up (typically a few minutes), the machine is ready for operation.
6.2 Operasi Panel Control
The HZ-500 features a user-friendly control panel for adjusting haze output and settings.
Gambar 6.1: Diwincik view of the Antari HZ-500's control panel, featuring a digital display, function buttons, timer, volume, and interval controls, along with a direct haze mode switch. The power input and DMX ports are also visible.
- Tombol FUNGSI: Navigates through various settings menus.
- Tombol TIMER: Activates and adjusts the haze output timer.
- VOLUME Button: Controls the intensity or volume of haze output.
- INTERVAL Button: Sets the delay between haze bursts when using the timer function.
- ON/OFF Switch (Direct Haze Mode): Provides immediate haze output when switched ON, bypassing timer or DMX settings.
6.3 Haze Output
Once the machine is warmed up, you can initiate haze output using the control panel, an optional remote, or DMX control.
Gambar 6.2: The Antari HZ-500 Haze Machine actively producing a fine, even haze, demonstrating its operational output.
6.4 Pareuman
- Turn off the haze output.
- Flip the main power switch to the OFF position.
- Pegatkeun sambungan kabel listrik ti stop kontak listrik.
- Ngidinan unit pikeun niiskeun lengkep sateuacan mindahkeun atanapi nyimpen.
7. Pangropéa
Regular maintenance ensures the longevity and optimal performance of your HZ-500.
- beberesih: Periodically wipe the exterior of the machine with a soft, dry cloth. Ensure air vents are free from dust and debris.
- Fluid System: If the machine will be stored for an extended period, it is recommended to drain the fluid reservoir and run a small amount of distilled water through the system to prevent clogs. Consult Antari's official guidelines for detailed cleaning procedures.
- Panyimpenan: Store the machine in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the fluid reservoir cap is securely fastened.
8. Cara ngungkulan
This section addresses common issues you might encounter. For problems not listed here, contact Antari customer support.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya kaluaran halimun | No power; fluid reservoir empty; clogged nozzle; machine not warmed up. | Check power connection; refill fluid; clean nozzle (refer to maintenance); allow sufficient warm-up time. |
| Weak haze output | Low fluid level; incorrect fluid type; partial clog; low output setting. | Refill fluid; ensure correct Antari HZ-500 fluid is used; clean nozzle; increase output setting on control panel. |
| Mesin teu ngaréspon kana DMX | Incorrect DMX address; faulty DMX cable; DMX controller issue. | Verify DMX address settings on HZ-500; test DMX cable; check DMX controller functionality. |
9. Spésifikasi
Technical specifications for the Antari HZ-500 Haze Machine:
- model: HZ-500
- Beurat barang: 74.8 pon
- Ukuran Paket: 22.83 x 17.91 x 17.72 inci
- kakuatan: 120VAC 250V/7A (for US models, check label for other regions)
- Jenis Cairan: Antari HZ-500 Series Haze Fluid
- Kontrol: On-board digital control, DMX, Optional Wired Remote
- Sadia munggaran: 18 Oktober 2014
10. Garansi jeung Rojongan
For warranty information, please refer to the warranty card included with your product or visit the official Antari website. For technical support, service, or replacement parts, please contact your authorized Antari dealer or Antari customer service directly. Provide your product model number (HZ-500) and serial number when seeking support.
Antari Official Websitus: www.antari.com
