KanexPro Adjustable Tilt Wall Mount Instruction Manual

Bubuka

This manual provides comprehensive instructions for the safe and proper installation and operation of your KanexPro Adjustable Tilt Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This high-quality tilting wall mount bracket is designed for compatible televisions, offering a secure and adjustable viewpangalaman.

Émbaran Kasalametan

PERHATOSAN: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Do not install this product on walls that are not structurally sound. Ensure the mounting surface can safely support the combined weight of the mount and the display.
• Always use a stud finder to locate wooden studs. If mounting to concrete, ensure appropriate anchors are used.
• Ulah ngaleuwihan kapasitas beurat maksimum 165 lbs (75 kg).
• This mount is designed for indoor use only.
• Tetep bagian leutik jauh ti barudak.
• Salawasna gaduh sahenteuna dua jalmi kanggo pamasangan pikeun nyegah cilaka atanapi karusakan.

Eusi pakét

Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact KanexPro customer support.

• Majelis Lempeng témbok
• Panangan Braket TV (2)
• Pakakas Pemasangan (rupa-rupa sekrup, ring, spacer, jangkar)
• Parentah Instalasi (manual ieu)

Image: The main components of the KanexPro wall mount, showing the wall plate and two vertical TV bracket arms.

Setup sareng Instalasi

Alat Diperlukeun (Teu Kaasup): Pencil, Drill, Phillips Head Screwdriver, Level, Stud Finder, Measuring Tape, Hammer (for concrete anchors).

Lengkah 1: Gantelkeun kurung TV kana TV

1. Sacara ati-ati tempatkeun TV anjeun nyanghareup ka handap dina permukaan anu lemes sareng bersih pikeun nyegah karusakan layar.
2. Identipikasi liang pamasangan VESA dina tonggong TV anjeun.
3. Pilih sekrup, ring, sareng spacer anu pas tina kit perangkat keras anu cocog sareng liang pemasangan TV anjeun.
4. Attach the two TV bracket arms to the back of your TV, ensuring they are vertically aligned and securely fastened. The hooks on the bracket arms should face downwards.

Step 2: Mount Wall Plate to Wall

1. Determine the desired height for your TV. Hold the wall plate against the wall and mark the top and bottom center points.
2. Use a stud finder to locate two adjacent wooden studs. Mark the center of each stud. The wall plate is designed to span two studs.
3. Position the wall plate against the wall, aligning the mounting holes with the marked stud centers. Use a level to ensure the wall plate is perfectly horizontal.
4. Mark the drill points through the holes on the wall plate.
5. Drill pilot holes at the marked locations. For wood studs, use a smaller drill bit than the lag bolts. For concrete, use a masonry drill bit and insert concrete anchors.
6. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten firmly, but do not overtighten.

Image: Technical diagram illustrating the VESA compatibility ranges (min/max) for both horizontal and vertical dimensions, along with the overall measurements of the wall plate (32" wide x 8 7/8" high).

Step 3: Hang TV on Wall Plate

1. Kalayan bantosan, angkat TV kalayan ati-ati nganggo braket anu napel.
2. Align the hooks on the TV bracket arms with the top edge of the wall plate.
3. Gently lower the TV, ensuring the hooks engage securely with the wall plate.
4. Once the TV is hanging, locate the safety screws or locking mechanisms on the bottom of the TV bracket arms. Tighten these to secure the TV to the wall plate and prevent accidental dislodging.
5. Verify that the TV is level and securely mounted.

Gambar: Hiji sudut view of the KanexPro wall mount, highlighting the robust construction and the tilting mechanism on the bracket arms.

Operating the Tilt Feature

This wall mount features a variable downward tilt from 0° to -15°.

1. To adjust the tilt, locate the tilt adjustment knobs or bolts on the side of each TV bracket arm.
2. Loosen these knobs/bolts slightly.
3. Carefully tilt the bottom of your TV forward or backward to achieve the desired viewsudut ing.
4. Once the desired angle is set, firmly tighten the tilt adjustment knobs/bolts to secure the TV in place.

Pangropéa

Pangropéa rutin ngajamin umur panjang sareng operasi anu aman tina témbok anjeun.

• beberesih: Ngusap gunung ku lawon lemes, garing. Ulah make cleaners abrasive atawa pangleyur.
• Pariksa périodik: Periodically check all screws and bolts to ensure they remain tight and secure. Retighten if necessary.
• Ruksakna: If any part of the mount appears damaged or worn, do not use it. Contact KanexPro for replacement parts or professional assistance.

Pamérésan masalah

spésifikasi

• Jumlah modél: K-WALLM-14-BLK-0847
• Tipe Pamasangan: Tembok Gunung
• Jenis gerakan: Dengdekkeun
• Bahan: Alloy Steel
• warna: Black scratch resistant finish
• Kapasitas beurat maksimum: 165 lbs (75 kg)
• Tilt Feature: 0° to -15° Degrees (Variable Downward Tilt)
• Ukuran TV Maksimum anu Cocog: 51 inci
• Alat anu cocog: Televisi
• Beurat barang: 13 pon (kira-kira 5.9 kg)

Garansi sareng Rojongan

For warranty information and customer support, please refer to the KanexPro official website or contact their customer service department directly. Please have your model number (K-WALLM-14-BLK-0847) and purchase details ready when contacting support.

Pabrikan: KanexPro